How to Replace Headlights 07-09 Toyota Camry
HTML-код
- Опубликовано: 28 авг 2024
- Buy Now!
New Headlight from 1AAuto.com 1aau.to/ia/1ALH...
1A Auto shows you how to repair, install, fix, change or replace broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 07, 08, 09, Toyota, Camry.
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/ttt/1AX...
• 10mm Socket 1aau.to/tLk/1AX...
• Ratchet 1aau.to/tS5/1AX...
• Painter's Tape
For More Info visit us at 1aau.to/h/aPP/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Seriously guys thank you so much. This is the same model of car I have and I’m about to change the headlights. Your videos are so thorough and easy to follow. I am new to DYI car stuff and you all make it seem possible. Thank you!
Just installed new headlight assemblies in a 2009 Camry. This video proved very beneficial in successfully completing the job - THANKS!!
+Paul1PA Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
I did this yesterday in my driveway, with just a couple of ramps to elevate the front a bit. These instructions were incredibly helpful and 100% accurate. It went incredibly smoothly, and even though I was delayed a bit by one of the top bolts when the philips head stripped out, and a half hour round trip to the nearest auto parts store to get a pair of turn signal bulbs and side marker bulbs (both of which can't be changed without going through this whole process and 3 of the 4 were burned out for me), I was still able to do the job in a bit less than 2 hours. The instructions for aligning the headlights were also very helpful and only took about another 10 minutes, once it was sufficiently dark out. Thanks for the great video!
+@DeanBallweg Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Love my 09 camry but having to take the entire front of the car apart to change a headlight is just oxymoron. Ridiculous! What happened to simply opening the hood and popping the light out and replacing.???
Great tutorial!! He went through each step thoroughly so you can follow along. I did not remove the lower splash guards. I don't think this step is necessary and it makes more work for you.
This video was so helpful! completely installed the headlights by myself without any issues!
On the plastic rivets, you just push in the center pin and then pull the whole rivet out. To put back, just pop the center pin up, insert the rivet and then push the pin flush. Super easy and commonly used on motorcycles.
+Rob Mut Thanks for the tip! 1aauto.com
You read my mind!
I like all your videos but I remember when I bought a headlite for $ 1.50 and changed it in five minutes . Whats this world comming to.
Easy but sooooo many screws to just replace the headlights haha.
Exactly! They don't make anything easier these days!!😆😆
Some people seem to think that you have to do this to change the bulbs, you don't. This is only if you're trying to replace the headlight assembly, due to cracks or discoloration of the lens.
Thanks for the video. I can see that this is going to steal my Saturday from me. So im doing that next weekend. I'm glad my ranger was an easy job and only took a couple hours. The other car I have to do this to is my brother's 01 explorer and maybe an 04 F150.
+@Lowen264 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thank you very much for a clear explanation and a very well photographed video!
Nice vid, like the way you explained how to adjust the headlight height. Also can hear you clearly.
I guess I’ll leave it for the mechanic 👨🔧 thanks 😊 great video tho.
Don't know why vehicle manufacturers require you to disassemble the entirety of the front end to change a headlight. Stupidity
You can't get one of the inside bolts to remove the headlight without removing the bumper
Not all manufacturers require removal of the front bumper for full access to the headlights. I know my 2009 Hyundai Sonata headlight assemblies can be easily removed.
robguerr1988 it’s stupid, I had a 2001 Town car cartier that you could remove the headlights without removing the bumper
I just finished. I only removed the top and the bolt and clips and bolt at the fender.
It was stupidity to me until I realized that if it was not like this, you'd be buying new headlights daily.
Thanks for taking the time to make the video, very instructive!
Great video... I did mine in 30 minutes! I did put it on ramps to get at the bottom bolts easier, but it wouldn't have made much of a difference in time if I hadn't.
+Paul Stafford Thanks for checking us out! 1AAuto.com
Thank you for the very detailed video. It helped me out.
Thanks for the video. This helped me with the process. My 2009 Camry with 370k; the center bolt stripped in half when I used the 10mm socket and ratchet on it and the bottom half is still stuck. My two screws on the side with the rubber covers would not come out with my Phillips head screw driver, actually my screw driver broke when trying to turn them. WD-40 did not help at first. I was about to try a 15mm round off socket but my neighbor was able to get them turning with some vice grips.
+@joshuajakob598 Thanks for the feedback!
What do you do if the adjuster doesn't move the light beam?
Great video.Thorough and efficient.
+John T Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent video, thank you!!
+SGL Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Muy bueno,pensé que sería más fácil,y es muy trabajoso,pero hay que hacerlo,gracias.
+José Vasquez Thanks for checking us out! 1AAuto.com
Do you have a video on how to remove those bolts (screw with rubber cap @3:43) holding the bumper in if the rust penetrant doesn't work?
How long does it take for the rust penetrant to begin to work?
mine are rusted and stripped
i tried to drill them out
but it didn't work
so i don't know what to do
because now i can't use a screw 🪛 driver
could you please do one for how to replace headlight assembly for 2009 Lexus ES350
What are the best brightest bulbs for headlights on 2009 toyota camry hybrid? Very difficult to see at night
You probably have burned projector bowls and need to replace the entire assemblies. The heat from the halogen bulb burns off the chrome inside the projectors and ruins them.
my camey has like a fender thingy , so i cant just snap it off .
its like a bumper lining
which socket of the high beam and low beam?
THX BRO!
A lot of works for me and I can’t do anything about that.
Too labor intensive. Too many parts to loose and or confuse for the average Joe
How much would you pay to do this work if you rather sit inside and watch the game?
Just under 200
How can i remove rusted and wasted screws? I have tried everything and they wont budge
me too
mine are rusted and stripped
so i tried to drill them out
You don't have to remove the splash guard fully, just a waste of time
Agreed, I just removed the front bolts hooking it into the bumper itself. Other than that this video was super helpful! Thanks! :-)
Its not a 194 bulb its a 158.
they are often confused you are right. 158/168/193 look similar but have different specs especially in watts. There is a slight difference between 168 and 194 bulbs in their wattage. The first one has a power rating of 4.9 watts, whereas the latter has 3.8. The 194 is best for applications where constand lighting is needed like trunk ares..etc.
why a big ass extension lol
I hate these new cars
God bless yall, Jesus loves yall and He wants you to be saved 🙏 John 3:16 romans 10:9-10 Have a blessed day yall 💖