I had a Land Rover Disco 2 8-cyl in the USA. I recently purchased a Disco 2 TD5 while living in Morocco. I love the car. It just feels right for me. This video was helpful since I have a ball joint which needs to be replaced. Thank you.
A real off roader that is not afraid to get down and dirty into the thickest of things. This car is not a sissy as with some SUVs we see on our urban roads intimidating small minis that they are tough. They rarely venture out in the wild. Let them show their muscle in the less traveled tracks and pick on their own size, The Land Rover!.
Im just about to buy a used defender so these videos have really helped me know what to looking for when buying one as well as maintaining it once i own one! thanks and keep up the useful videos
Land Rover 110, goes anywhere,light on juice, just like a beautiful women, you have to keep working on them to keep them interested or else it will throw you. Have a toolbox?
All that wheel rocking is great training for when you're stuck in mud to your axles. You should bring your assistant to some fun track next time you go wheeling :)
Hello thanks for your info, I've adjusted my steering box on my 300 defender seems that it's caused the steering wheel to shake at 70km don't think that the other joints need replacing but the Pittman arm movement up and down a little, will do further checks ,
My 70 Series 2A has a very pronounced clunk going over bumps, and the steering relay is leaking. Could a worn out relay be the cause of the noise? Should I replace it?
Not sure if you can help me but my 2001 110 has developed a steering fault.... from a central position it will only steer to the right. You can return it to the central position but it wont steer left from then onwards. There was a clonk from underneath when it went wrong and at the time I did engage the diff lock.... please help as I'm literally going round in circles 😂
my defender 97 mod gas a loose steering arm connected to the box , looks like it needs to be replaced as the spline is worn may be the box and pittman arm needs to be replaced , any advise would be great many thanks
Great video. If the tires are not touching the radius arm and there is some more room before it touches, can a person adjust for a bit better steering radius? Because my Defender turns about the same as an old crew cab long bed Ford.
The only thing I would add is for the Discovery 2’s the steering shaft from the steering wheel to the steering box will fail over time. Essentially the universal joints wear out. It’s one of the main causes of death wobble and sloppy steering for Discovery 2’s.
well basically found the nut on the steering box drop arm loose,i mean hand tight loose,so i have torqued that up correctly and hit the locking tab over,strangely the rear steering bar(long) with the 2 track rods on was bent,this is bizarre,not been off roading since the summer,not hit anything,unless somethings clipped my wheel while its been parked up,its off tomorrow to get the tracking done,new bar and trackrods fitted,annoyingly cant work on it myself at the moment,works gone mental
Hi cris ! Nice videos... I learn enyvideo you put in youtube I have question, l have disco 98 300Tdi the problem is... wear irregular in the front left tire (camber negative) so what you think is the problem ????
jeez I've never seen such rusty under body componants as in the UK, I thought landies leaked enough oil to keep em good. Even with regular beachwork here in Au the suspension and chassis keeps its paint on, I've never seen a rusted diff. The sun kills all our paint, rubbers and interiors, on my 88 rangie the door waist seals and window rubbers are all shrunk and hard as rock. I got some door seals from a 90 model in the UK and they are as soft as new
My defefneder turns less got the left, than to the right. E.g. 1 and 3/4 turns right. But only 1 and 1/3 left. Hits steering stop bolt when turning right but still has 1" to go on the left?
Land Rover Toolbox Videos should the drop arm be straight forward when steering wheel is straight. Mine is slightly to the left maybe about 40 degrees? I can't see it fowling on anything? Could it be the rods need adjusting or tightening?
Take a look at replacing the steering box video I show in there how the steering box should be set up before fitting the drag linkage. There is a reference point which is used. Perhaps your drag link is maladjusted? or bent?
Both drag link and track rod end needed removing and refitting as the last person to do it had wound in one side more than the other. Then tighten them both up and its much better. Thanks for your help and videos!
I had a Land Rover Disco 2 8-cyl in the USA. I recently purchased a Disco 2 TD5 while living in Morocco. I love the car. It just feels right for me. This video was helpful since I have a ball joint which needs to be replaced. Thank you.
I really enjoy watching your diy videos. Keep up.
A real off roader that is not afraid to get down and dirty into the thickest of things. This car is not a sissy as with some SUVs we see on our urban roads intimidating small minis that they are tough. They rarely venture out in the wild. Let them show their muscle in the less traveled tracks and pick on their own size, The Land Rover!.
Im just about to buy a used defender so these videos have really helped me know what to looking for when buying one as well as maintaining it once i own one! thanks and keep up the useful videos
+vidmaster51 What have you decided on? 90 or 110?
Land Rover 110, goes anywhere,light on juice, just like a beautiful women, you have to keep working on them to keep them interested or else it will throw you. Have a toolbox?
All that wheel rocking is great training for when you're stuck in mud to your axles. You should bring your assistant to some fun track next time you go wheeling :)
Hello thanks for your info, I've adjusted my steering box on my 300 defender seems that it's caused the steering wheel to shake at 70km don't think that the other joints need replacing but the Pittman arm movement up and down a little, will do further checks ,
excellent video Chris,my steering's gone frightening,checking it at the weekend see whats going on,hard to keep it in a strait line on the motorway
Let us know what you find.
I love the Rover,I have and will always be a Land Rover person. The 130 is attractive.
Very informative, thank you so much, great upload on the education plus saving $$$$$$
Next release for next week early for those on Google plus Enjoy.
take a look at the nearside front tyre too !
My 70 Series 2A has a very pronounced clunk going over bumps, and the steering relay is leaking. Could a worn out relay be the cause of the noise? Should I replace it?
So apart from the panhard rod and radius arms there are no rubber bushes in the steering?
Not sure if you can help me but my 2001 110 has developed a steering fault.... from a central position it will only steer to the right. You can return it to the central position but it wont steer left from then onwards. There was a clonk from underneath when it went wrong and at the time I did engage the diff lock.... please help as I'm literally going round in circles 😂
do you have vid on how to air bleed a steering box on a disco 2 td5 2003. just had new box fitted but have issue with air in system.
Dude I owe you a beer. After watching your video I found out what was causing my death wobble. My panhard bushings were shot.
Glad it was of help. You can buy me a coffee if you like to help the channel here. Cheers. www.buymeacoffee.com/9cFL5nH
Done!!! Go take your wife for a pint! And tell her I had my wife do the exact same thing while I was under my D2.
my defender 97 mod gas a loose steering arm connected to the box , looks like it needs to be replaced as the spline is worn may be the box and pittman arm needs to be replaced , any advise would be great many thanks
Great video. If the tires are not touching the radius arm and there is some more room before it touches, can a person adjust for a bit better steering radius? Because my Defender turns about the same as an old crew cab long bed Ford.
The only thing I would add is for the Discovery 2’s the steering shaft from the steering wheel to the steering box will fail over time. Essentially the universal joints wear out. It’s one of the main causes of death wobble and sloppy steering for Discovery 2’s.
Do the LR3's have that same issue?
well basically found the nut on the steering box drop arm loose,i mean hand tight loose,so i have torqued that up correctly and hit the locking tab over,strangely the rear steering bar(long) with the 2 track rods on was bent,this is bizarre,not been off roading since the summer,not hit anything,unless somethings clipped my wheel while its been parked up,its off tomorrow to get the tracking done,new bar and trackrods fitted,annoyingly cant work on it myself at the moment,works gone mental
One side of my rear axle is protruding? What could be the possible problem?
Hi cris !
Nice videos... I learn enyvideo you put in youtube
I have question, l have disco 98 300Tdi
the problem is... wear irregular in the front left tire (camber negative) so what you think is the problem ????
How did you attach the camera to take video whilst driving? I’m wanting to do similar to help find a knocking when going around roundabouts.
+dangerousdamo go pro camera bolted to the bottom of the bumper.
Bolted, good idea, was worried that the sticky pads may not be man enough and the strapping it may lead to too much vibration in the camera.
dangerousdamo Sticky pad perhaps is okay but I don't trust them. Just drilled and bolted through with M6 bolts and nuts.
jeez I've never seen such rusty under body componants as in the UK, I thought landies leaked enough oil to keep em good. Even with regular beachwork here in Au the suspension and chassis keeps its paint on, I've never seen a rusted diff. The sun kills all our paint, rubbers and interiors, on my 88 rangie the door waist seals and window rubbers are all shrunk and hard as rock. I got some door seals from a 90 model in the UK and they are as soft as new
do they put salt on the roads in the uk
My defefneder turns less got the left, than to the right. E.g. 1 and 3/4 turns right. But only 1 and 1/3 left. Hits steering stop bolt when turning right but still has 1" to go on the left?
Check that the steering components or wheels are not fouling on anything.
Land Rover Toolbox Videos should the drop arm be straight forward when steering wheel is straight. Mine is slightly to the left maybe about 40 degrees? I can't see it fowling on anything? Could it be the rods need adjusting or tightening?
Take a look at replacing the steering box video I show in there how the steering box should be set up before fitting the drag linkage. There is a reference point which is used. Perhaps your drag link is maladjusted? or bent?
Both drag link and track rod end needed removing and refitting as the last person to do it had wound in one side more than the other. Then tighten them both up and its much better. Thanks for your help and videos!
The drop arm ball joint is a stupid solution to a problem that doesn't exist.
Bump