Hey Vasques, hope all is well. I think they run around $2000 on home depot depending on the size you pick. Just Google Integra Patio Cover home depot. Have a good weekend man
Does the hanging rail have to be perfectly level? My fascia that I am mounting to isn’t real level. I hung the rail level and it doesn’t look straight.
Yea, fascias tend to warp with time from the roof weight. I would chalk a line from end to end and follow that, rather than the fascia. So when you slide the second part of the hanger on, it goes on easier.
@@joholi You have visually level, and the true level. Or at least when I'm building that's how I see it. Often true level won't look right, because the house isn't true level anymore after settling. In this case, I usually split the difference between what looks level and true level. I hope that makes sense for your questions. If it's something your still having a hard time with, feel free to send a picture over to our email and I'll see if I can give you some proper suggestions.
Awesome video, thanks for going in detail. What was the height on this one? I have to go 10 feet on the hanger and slope it down from there because my back patio door is 3 feet of the ground and down 4 steps. You think this is still doable and not look wonky with this product?
Normally, you would run metal conduit on the bottom to add lights or fans. It's sturdy enough, you just need to seal the screws and attached to where the panels meet for the strongest connection.
Hey Joholi, there was a bar that came with the kit to screw the roof panel and side fascia. We didn't use it, and just put a screw on top and bottom at the gutter and at the house. That was probably the trickiest part of the build, I imagine using one of the clips or the bar would add extra support if needed.
I would looked into the LRone or Liferoom One, it comes with screens. If you want to add screens, Coolaroo has some good screen options from Home Depot that are very affordable.
Perfect patio cover! I had never seen this before and I love it!
Thank you so much!! 😃✨
❤ perfeito lindo...parabéns à todos vocês ❤️ ✨
Obrigado Marcia!
Can you install flood lights and a outdoor ceiling fan with this type of patio cover
Greetings!!! What blade are you using to cut the aluminum? Thx!
Hey Don, either a general purpose blade with relatively fresh teeth, or an aluminum blade works
Belo trabalho 👏👏👏👏😍😍😍😍
Thank You! 😃🙌
Hey how much is this? I need the same thing
Hey Vasques, hope all is well. I think they run around $2000 on home depot depending on the size you pick. Just Google Integra Patio Cover home depot.
Have a good weekend man
I want to win a patio cover too!! When is the next giveaway? 😅
Anything is possible haha, we may do another one this year on Instagram
Does the hanging rail have to be perfectly level? My fascia that I am mounting to isn’t real level. I hung the rail level and it doesn’t look straight.
Yea, fascias tend to warp with time from the roof weight. I would chalk a line from end to end and follow that, rather than the fascia. So when you slide the second part of the hanger on, it goes on easier.
Is it more important to be straight instead of level?
@@joholi You have visually level, and the true level. Or at least when I'm building that's how I see it. Often true level won't look right, because the house isn't true level anymore after settling. In this case, I usually split the difference between what looks level and true level. I hope that makes sense for your questions. If it's something your still having a hard time with, feel free to send a picture over to our email and I'll see if I can give you some proper suggestions.
The patio roof is nice how about for stronger wind about 110 mph,???
Thank you for your comment! 🙌 Yes, this was built in a very high wind area with a similar wind rating.
Woot woot
How much do you charge to install these?
Awesome video, thanks for going in detail. What was the height on this one? I have to go 10 feet on the hanger and slope it down from there because my back patio door is 3 feet of the ground and down 4 steps. You think this is still doable and not look wonky with this product?
Trampo foda!!! ❤
Thank You Maria!! 😃✨ Happy Birthday! 🎁
Would there be a way to hang lights or ceiling fans from this? Is it sturdy enough?
Normally, you would run metal conduit on the bottom to add lights or fans. It's sturdy enough, you just need to seal the screws and attached to where the panels meet for the strongest connection.
Is the flashing necessary? I wouldn’t like securing it with screws that are visible from under the cover.
If you have eaves that should protect the roof mostly. Also, we just used caulking where the screws would go, to not have them show through the roof.
Do you have another video of a more detailed layout?
Hey Mark, how can I help with layout? This one had a curved slab, so I understand it may be a little trickier to than a square area.
Could this Patio be a support for a pool enclosure?
The Tec screws for the Patio Cover Fascia are inserted on what side of the fascia?
Hey Joholi, there was a bar that came with the kit to screw the roof panel and side fascia. We didn't use it, and just put a screw on top and bottom at the gutter and at the house. That was probably the trickiest part of the build, I imagine using one of the clips or the bar would add extra support if needed.
Great video! Am I correct that Heritage and Integra are the same?
Thank you! Yea, I believe the Heritage is the Florida named version of the Integra. It probably includes some more hardware.
👏👏👏👏👏
👏 👏 👏 👏 👏
what kind of cocking did you use?
I believe we used DOW for this kit, we show it at the beginning of the video.
Hi is there a link to buy this patio cover?
Hi there Luis, thanks for your comment. Yes you can find the link on the video description! Hope this helps, have a great day.
Can this be screened in? If so please share.
I would looked into the LRone or Liferoom One, it comes with screens. If you want to add screens, Coolaroo has some good screen options from Home Depot that are very affordable.
What size cover is this??
Hey Luis, you can find all the details on the description of this video, size and cost. Thanks! 😊
how many post for 10x20?
3 or 4 usually
How much