First gen (2004-2006) Scion XB 1NZ-FE Fuel Injector Replacement
HTML-код
- Опубликовано: 15 сен 2024
- In this video I show you how to change the fuel injectors on your first gen Scion XB, or 2000-2005 Toyota bB. This video should also be applicable to the Toyota Yaris, Echo, and Prius as they all use the same 1NZ-FE engine, and the same injector part number.
Parts and tools used for this video can be found here:
Injectors (23250-21020): ebay.to/2V5E8ro
Screwdrivers: amzn.to/2HDyZi0
Socket Set: amzn.to/37Axk7o
Gloves: amzn.to/2HxTzAq
The BEST shop towels: amzn.to/2HE8Yzo
Fire Extinguisher: amzn.to/2P0XQR9
Radio (Toyota version): amzn.to/2uaKr1A
Bluetooth OBDII adapter for radio: amzn.to/37Fr3HV
Part Retriever: amzn.to/38DVgbC
Work Light: amzn.to/321Y287
All of the filming equipment used can be purchased here:
Sony A6300 w/ 18-135mm Lens: amzn.to/38CFHkc
Samsung 128GB SD card: amzn.to/2HvpGAJ
Tripod: amzn.to/38GcvsL
![[Part 1/8] How To Rebuild Your Toyota Engine, Echo, Yaris, Scion XA, XB [1NZFE ]](http://i.ytimg.com/vi/mJ2QqjWyWnQ/mqdefault.jpg)
Hey guys, the links to buy the injectors I mentioned, as well as any other parts/tools is right above me in the description of you're looking for them!
Kinda need your help bought aisin injectors 23209-21020 came with orange oring top metal calor . Old one had hard plastic set grove and oring on new ones do you remember what yours looked like?
@@joename6309 Mine were black
@@jidoshajoe7601 ok ty
Good job. I have 290000 miles and my scion xb is still running strong.
Great information about how to replace fuel injectors on a 2005 scion Xb. Just a couple of things I’d like to add one would be that you need to remove the bolts holding your valve cover down, so you can gain better access to your fuel rail . And like he mentions, just be careful please vacuum and wipe up all the dirt and debris around the fuel injectors, but either than that great info took me about an hour to replace four I just had to go back to NAPA since the injectors I purchased did not come with the complete O-ring seal.
Empowering the people, lead by example. Good work and keep fighting the good fight.
Thank you so much for your video I was able to change my Toyota echo injectors which this scion has the exact same engine! Great stuff please keep posting
Thank you! My Xa has almost 280,000 miles on it and there is a slight hesitation that's been there for a while. I've replaced the plugs a couple times over the last year, replaced the PCV, replaced the Mass Fuel. Gave up at one point and took it to my mechanic because of an exhaust smell - he saw that I'd knock loose a hose (DOH). Didn't want to charge me. Engine shakes a lot but it is paid for!
Thanks for the video really helped me. Well done. I had a leaking injector on the far left /passenger side. i was able to replace it without totally removing the whole rail which meant i didn't need to mess with the hard to get to side 10mm bolt.
Just what i need. 1NZ-FE repair videos. You're a legend!
Watching this video post-idiocy on my end, torqued that large left 12mm bolt to "oh god it's loose now" and am currently regretting it with a pool of lightly boiling gasoline in the injector trench... Thank you for making this video so I can do it better in a couple days! (And yes, I am very much an idiot for not watching this video before doing that, lol)
I love this! Just replaced a lot of the same things on my engine, paid 2k for the same car 🤣 I'm thinking this will be the next step...hopefully not for a while...phew
Good video, covered a lot of good stuff, such as safety, other issues such as the fuses and coil packs. I dig the free Harbor Freight LED light too!
I appreciate this video man very good it helped me swap out my injectors.
Did you not pull the fuse to the high pressure pump
thks man, i too also have change both spark plug and ignition coil and the p0302 came back... just as i thought , the injector is the ones that's bad .. thks for he video ..
Jj...subbed... I appreciated you tips and hints along with your clear instructions..
Please will you have more first gen xb diy tutorial content?
I am alsi interested on info regarding your stereo
Good job👍
I have the same problem..thank you for your nice video 👍👍
Also hey guys when you remove the injectors PLEASE!!!! clean the inside of the holes were you took the injectors out of the engine because dirt will fall in and that’s bad that the dirt will take 1 month to come out and bad for your pistons and your valves
Thanks for the post!
My 06 xB has been getting 21-22 mpg on a consistent basis. It used to get 28+ mpg around down and 33-38 hwy. I took it to the dealer. No codes. I've had everything done on this car to improve mileage. No change. I switched to premium fuel at Exxon. Still no change. I kinda narrowed it down to this
Never use premium fuel!! It will destroy our (I also own a xB) catalytic converters.
Did it fix your bad mileage?
Been a while but same, can't place it
Having a issue where the car has trouble starting when it’s warm. Did coils, cleaned throttle body, replaced fuel pump recently(car was not starting at all.
hello. have you found the problem to your hard start when engine warm? I seem to face the same problem, I also did coils cleaned throttle body and replaced fuel pump.
It was the fuel pressure regulator. If you ever change fuel pump, change all the components
Hi bro. What are the injector fuel speeds of the 1nz and 2nz engines in cc?
Codes are gone cause you disconnected the battery
Please check fuel leak immediately. First time i started up, fuel shooting out. Found one injector is broken. Second time I started up, fuel leak. One seal ring is cracked. Third time started up, one more seal ring is broken. Bad experience and quite dangerous.
I'm doing something wrong on mine I can get the fuel rail out enough to get 3/4 injectors out ugh
Gracias tu vídeo nos ayudó mucho
Howdy Joe, great video just one question as this is your first video of you that I’ve seen, do you have a basis on this or a corroboration? Not saying you don’t know what you’re doing or I don’t trust your knowledge by all means, just needing clarification. My apologies if I sound rude, not my intentions.
Dude you fucking rock. Thank you.🤘🏻😎❤️
Thank you. I love this video. I have a 2012 Toyota Corolla xli and it has the same 1nz fe engine. I am having a misfiring issue on the #4 cylinder. I replaced the coil pack and a set of sparks plugs but no improvements. Could it be that something is going wrong with the injector # 4?
To see if it's the injector, switch injectors #3 and #4. Clear the codes from your car with your OBD2 reader and drive around until you get the codes again. If you get the error code on #3 then you'll know it's the injector. If the code keeps saying #4 then something else might be the issue. Same thing when you're trying to troubleshoot spark plugs and ignition coils.
Out of curiosity I was wondering on your Atoto a6 did you have to use any extra brackets to make it fit?
I had to modify the original slightly.
I was wondering if changing the injectors permanently fixed the problem or if the codes came back after driving the car. I'm having a problem with my 1nzfe (Yaris) where it throws a P0301 and loses power but only when going up hill under high rpm's. Under normal driving conditions it wont throw the code. Like you, I've changed the plugs and ignition coils and I'm probably going to replace the injectors next but it would be great to get an update on your results. Thanks!
Did you ever diagnose the issue? I'm having the same problems now.
@plsmoothy Hey brother, did you ever find out the issue? I’m having the same isssue as you, and I want to see if you replaced the fuel injectors and if it fixed your car afterwards
@@Senormaster it was definitely the injectors. I had all the injectors flow tested and one of them was malfunctioning. I replaced the bad one and popped them back in and the problem was solved. Good luck
@@plsmoothyHey brother, question, did your injectors ever go bad after installing the new ones? My car is going through the same thing again. It was working well for 4 months after changing the injectors, but then it gave me that same issue again going up hill.
Thanks
P0302 on my scion xa 248k.
To diagnose mine I sprayed brake cleaner around the injector seal and the idle surges meaning I have a vacuum leak. Fuel injector seal kit is $2.00 so I'm ordering 4 sets and changing all the seals... hope this solves my issue
The fuel rail is held down by a part of the valve cover in mine. It's almost imposing to lift the rail up. Please help
It is in this one too, you have to just wiggle it around the right way.
I think I'm going thru the same problem and I'm too lazy to do it too😆
5:47
Lighting is not good.
you could've just buy a rebuilt kit for $5.00 and rebuild them yourself
Hey guys this piece of trash here is gonna work so dont give me a hard time when my ass and my engine catches on fire 😂 Also i havent trouble shooted shit. I am not a mechanic im just a stupid fuck who was dropped his head way too many times. And because im not a mechanic and too be frank with you im really just a incompetent moron who spends a needless 600 dollars on spark plugs and ignition coils that didnt need replacement. So when i say something isnt the problem what im really saying is i replaced a part that didnt need to be replaced🥴 Btw the car just started making a
rattling noise from the rear tire, i guess its time to replace my engine 🤔 Well i replaced my engine and the tire the rear tire is still making noise so i guess its time to replace my front windshield. Alright guys the tire is still making noise so after my thorough diagnostic algorithm that i made up when i was a newborn, ive come to the conclusion that it might be the tire although it could very well be my turn signal fluids are low, and with my experience im gonna go for the latter🥴