Good video. It's more like a 30-45 minute job when doing it the first time. Just to note, it's not needed to remove that carbon fibre trim below the head unit. You only need to move the front part of the centre console up slightly to remove gear gaitor. And like someone else mentioned, work the wires from top to bottom as it's a lot easier, threading from behind the glove box which saves you from removing that. Nevertheless, Mazda wanted £240 on labour to fit this, and this video helped me save that money! Lol.
Hi Thank you for comment and you mention that carbon fibre trim no need to remove yes you correct, but I removing it no scratches or any damage, if you scratched that too expensive to replaced that part.it’s ok you working on your own car but if you working with someone car. You have to do properly and nice and neat job.
I just did it today. I took the lower side panel out and I was not very kind to the old module with a flat head and needle nose plier, after all, that is junk anyway. I used a wire guide from top to bottom and then hooked the wires with a wire hanger shaped into a hook right out where the new module was going to be. Quick and efficient. Only removed the side panel by the accelerator, I did not have to do all that (really took 20 minutes) and my CX-3 is just fine now. Oh and aside from the little sponge stickers I used a zip tie on the two cables so that gravity would pull them down together then I hooked them and pulled them out the hole for the new module. Oh and yes secured with zip ties and the anti-noise padding supplied.
When putting the cable in is easier to go top to bottom. Plus, test it all before putting all back together just in case it doesn’t work pain in the ass taking it all to part again.
Thank you very much, I have changed the radio by just watching your video 👏👏👏👏👏👏👏 for anyone still want to do it. The way I changed it for Mazda 2,scion IA 2016. 1. You don't need to remove the glove box, just open it and from top of your car screen(after you opened it like the video) slide the cable to the glove box. Once you slide it, it is easier to send it to the new radio. 2. I only removed the radio like the video and didn't remove the shift cover or the one he pulled, just remove the rim around it. Since it is necessary to remove the radio to change it. And it is hard to remove the screw just with screw driver when you remove the unit(the screen part) I used the screw gun. Basically the point is. Remove the radio, remove the unit(where the screen is) and just plug the cables. You don't need to remove parts around the home button or mute.... And I bought the android auto from amazon for $59. And don't forget to tie the cables together, or they will send you a thing to tie it when you buy the radio. And after you plug, before you put it in, I suggest you try if it works, just to not waste time if it is not compatible. You will see the android auto and carplay greyed out. If you try with wrong cable it may not work, it didn't work at first but when I try with another cable it worked. It isn't hard, but ofc you can be nervous if you have no clue but decide to try it just to not pay around $300 for dealers. Good luck, and if you have any question, ask me, I will answer.
I will try it in the upcoming days on my M2 2016 dj 115, i’ve bought the unit off amazon for wired apple carplay (80€), i updated the firmware today to make it compatible, i’ll write again when i get the thing if i need help, thx for the offer!!
@Maririo93 before you change anything, be aware that the sd card may not work anymore. Mine stopped working, probably it can be because I didn't follow the unit guideline, not sure.
Hi this is a very useful and clear video. Would you be able to show how to connect an aftermarket reverse camera to the Mazda 2 2015 model. Would be greatly appreciated. Thanks
Great video. I have a (2014)Mazda 3 I am looking at trading in, I was wondering if I take out the apple car play module and replace it into my wife’s (2015)Mazda 2 are they both compatible with each other? Including the oem module to replace back into my car? Thanks.
I was able to achieve this on my Mazda 2 DJ (2017 model) routed the cables through the glove box and underneath the side panels, it was my first time doing it and it was difficult but I was able to get it working 😅
I just purchased the new Mazda console for my 2017 cx3 thinking I was capable, but this is horrifying! Definitely going to pay for the service now. Thanks for posting!
It doesn't help that the location of the radio is on top of the dash. Most cars don't require you to remove the entire centre console, trim and glovebox just to do this lol.
Thank you for the video guide. I was finally able to install apple carplay with no issues so far. Only thing is my touch screen is not working for some reason
Hi! I own a 2016 Mazda 2 and I would like to upgrade by putting an aftermarket radio and speakers. Could that be possible??? Every autosound shop I have visited have told me that there are no aftermarket radio for it😕. One of the problems I have with the original sound system is that sometimes,one speaker sounds way too low. It may be a cable contact ? 🤷♂️
THIS IS THE REAL TUTORIAL! Done it on mine in 90 minutes circa. I had a bit of issues with the cd player (mine came with that above the mzd unit) which does not fit fine with the two new cables. I think I am going to remove the cd player which I never used it and put a mask or a pocket to fill the hole. Luckily I did not need to do a software upgrade and the car engine started correctly after the upgrade (LOL) Now I wonder? Is the MZD disconnected from the car engine? If the replaced CarPlay unit turns to be junk or faulty, does the car work without it? (I think so but I'd like to hear other opinions)
Hi Roshan, I have a 2019 Toyota Yaris with exact same radio. How do I buy the correct parts here in the US? Can you tell me the name of the parts you bought? Maybe EBay? Thank you! Great video!
Hello, I have a yaris IA 2017 and the radio not working. It repeats the start car logo on the screen. What can I do with it? How can I fix it? I cannot change channels only the volume buttons work, nothing else. Pls help
Hi @Roshan T Automotives.... I'm hoping someone out there who knows a lot more than me about this can help. I'm contemplating retrofitting my 2018 Toyota Yaris iA with a software update and usb unit that would allow me to use Apple Carplay and Android Auto with the existing screen. The 2018 Yaris iA is actually a rebranded Mazda 2. So, can this video be applied to a toyota? Is that right?
@@keninho1735 Hey! I have a 2019 iA. What part did you use for your car? I can’t seem to find it anywhere. The part number in this video is from Mazda and I’m afraid it might show Mazda logos in my car. Any info is welcomed. Thanks! -AC
Yes mate this genuine install all functions working fine this unit only for apple car play we not replace head unit if you remove head unit yes you need steering wheel plug.
Puedes darme la actualización de software del yaris IA 2017, entiendo que se debe actualizar para que pueda funcionar después con el Radio de Apple Car o android car , de lo contrario no funciona ?
drive.google.com/drive/folders/1CM0C-0OsB6CBxg6_PDvJM0Ej69Y7J3o0 No sé sí ya lo encontraste en este tiempo, pero sí no ahí vienen los archivos para cada región yo recién actualicé el mío (Yaris iA 18) y sin problemas, ahora solo estoy esperando que me llegue el módulo. OJO que cuando actualices cambiará el color de la interfaz a rojo y aparecerán los logos de mazda, puesto que nunca se actualizó con la versión para toyota , pero vale la pena por tener el sistema actualizado, y aparte que funciona muchísimo mejor con la actualización
I jyst got a mazda 2 2015 plate and cds wont seem to go in in says label up and it won't go in I put them in upside down and they go in and eject obviously cus they are upside down wot am I doing wrong? Is it knackered
@@vindiroshan he said that he is interested in your work and that he would like to know where to get the android radio so he could do the same to his car
@@vindiroshan my reply wasn't for you, ofc you can do it, you even upload tutorial for us. 😅 Just replying for the other guy. Since you replied though, from what I am seeing, I don't have to remove the stuffs on the shift, and under the screen. And only thing that worries me is if I can really get the wire through(inside).
Thanks so much for your video! Going to give this a try. Could you please send the link for Australian software update? I've subscribed to your channel. Thank you.
I did some research and apperantly Android Auto just doesnt work with touchscreen in Mazdas. Something to do with the disabling of the touchscreen while driving...
I read that touch doesn't work on android auto on mazda. I also changed it and it doesn't work. And i heard in one video review of android auto. It doesn't work. But if you goto home, the touch works. It is just mazda thing in my opinion.
Greetings, it can be connected to yaris 2019, the car is Mazda, the bodywork and the radio, everything is also Mazda, thank you, I await your response.
This unit only upgrade features not functional change I mean if replaced head unit you need to replaced steering connection and all wiring, all functions work as normal.
Good video. It's more like a 30-45 minute job when doing it the first time. Just to note, it's not needed to remove that carbon fibre trim below the head unit. You only need to move the front part of the centre console up slightly to remove gear gaitor. And like someone else mentioned, work the wires from top to bottom as it's a lot easier, threading from behind the glove box which saves you from removing that.
Nevertheless, Mazda wanted £240 on labour to fit this, and this video helped me save that money! Lol.
Hi
Thank you for comment and you mention that carbon fibre trim no need to remove yes you correct, but I removing it no scratches or any damage, if you scratched that too expensive to replaced that part.it’s ok you working on your own car but if you working with someone car. You have to do properly and nice and neat job.
Pls subscribe
I just did it today. I took the lower side panel out and I was not very kind to the old module with a flat head and needle nose plier, after all, that is junk anyway. I used a wire guide from top to bottom and then hooked the wires with a wire hanger shaped into a hook right out where the new module was going to be. Quick and efficient. Only removed the side panel by the accelerator, I did not have to do all that (really took 20 minutes) and my CX-3 is just fine now. Oh and aside from the little sponge stickers I used a zip tie on the two cables so that gravity would pull them down together then I hooked them and pulled them out the hole for the new module. Oh and yes secured with zip ties and the anti-noise padding supplied.
When putting the cable in is easier to go top to bottom. Plus, test it all before putting all back together just in case it doesn’t work pain in the ass taking it all to part again.
Love the work
Thank you very much, I have changed the radio by just watching your video 👏👏👏👏👏👏👏 for anyone still want to do it. The way I changed it for Mazda 2,scion IA 2016.
1. You don't need to remove the glove box, just open it and from top of your car screen(after you opened it like the video) slide the cable to the glove box. Once you slide it, it is easier to send it to the new radio.
2. I only removed the radio like the video and didn't remove the shift cover or the one he pulled, just remove the rim around it. Since it is necessary to remove the radio to change it. And it is hard to remove the screw just with screw driver when you remove the unit(the screen part) I used the screw gun.
Basically the point is. Remove the radio, remove the unit(where the screen is) and just plug the cables. You don't need to remove parts around the home button or mute....
And I bought the android auto from amazon for $59. And don't forget to tie the cables together, or they will send you a thing to tie it when you buy the radio. And after you plug, before you put it in, I suggest you try if it works, just to not waste time if it is not compatible. You will see the android auto and carplay greyed out. If you try with wrong cable it may not work, it didn't work at first but when I try with another cable it worked. It isn't hard, but ofc you can be nervous if you have no clue but decide to try it just to not pay around $300 for dealers. Good luck, and if you have any question, ask me, I will answer.
I will try it in the upcoming days on my M2 2016 dj 115, i’ve bought the unit off amazon for wired apple carplay (80€), i updated the firmware today to make it compatible, i’ll write again when i get the thing if i need help, thx for the offer!!
Also, the unit connects to the screen right? But the original “brain” of the car is still there right? Like i’m not changing the whole OS am i?
@Maririo93 before you change anything, be aware that the sd card may not work anymore. Mine stopped working, probably it can be because I didn't follow the unit guideline, not sure.
@@Maririo93 You only change the radio, under, you don't change nothing on top, just plugging only.
@@ADwaMoviesandMusicsproduction Understood thanks. Well i don’t use the sd anyways so that’s fine
very helpfull Video ,thx my Friend !!
Hi this is a very useful and clear video. Would you be able to show how to connect an aftermarket reverse camera to the Mazda 2 2015 model. Would be greatly appreciated. Thanks
Would love to get in touch with you. I have a 2017 toyota yaris IA that i need carplay in.
Great video. I have a (2014)Mazda 3 I am looking at trading in, I was wondering if I take out the apple car play module and replace it into my wife’s (2015)Mazda 2 are they both compatible with each other? Including the oem module to replace back into my car? Thanks.
Yea same , make sure to update cmu
Apple CarPlay keeps disconnecting itself, worked flawlessly for a year after installation. What do you think the issue is? Tried new cable
I was able to achieve this on my Mazda 2 DJ (2017 model) routed the cables through the glove box and underneath the side panels, it was my first time doing it and it was difficult but I was able to get it working 😅
I just purchased the new Mazda console for my 2017 cx3 thinking I was capable, but this is horrifying!
Definitely going to pay for the service now. Thanks for posting!
It doesn't help that the location of the radio is on top of the dash. Most cars don't require you to remove the entire centre console, trim and glovebox just to do this lol.
How do you get the vehicle telemetry transfer option?
Thank you for the video guide. I was finally able to install apple carplay with no issues so far. Only thing is my touch screen is not working for some reason
Can you tell me from where did you get the filmware?
@@aaynasharma9294 ruclips.net/video/qO3Lzln1Fc4/видео.htmlsi=AziUAwkZSqAKMziH
how can I get car play on a scion iA 2016?
Hi I was not able to unscrew the 10mm holding the screen, I used a drill screw, and by screw driver still doesn’t work. Do I need any stronger tools?
Used ratchet socket 10mm and 3/8
Hi! I own a 2016 Mazda 2 and I would like to upgrade by putting an aftermarket radio and speakers. Could that be possible??? Every autosound shop I have visited have told me that there are no aftermarket radio for it😕.
One of the problems I have with the original sound system is that sometimes,one speaker sounds way too low. It may be a cable contact ? 🤷♂️
Hi
What type of audio unit you got can you pls provide me your radio unit picture.
@@vindiroshan how?
@@vindiroshan it is the one in this video:
ruclips.net/video/9bobx_qPLFs/видео.html
Yes
You can upgrade my friend try to look Mazda dealer ship or online dealer.
how can I upgrade my standard audio to OEM screen type on my Mazda skyactiv?
This is only Mazda mZD screen what type of vehicle you have
THIS IS THE REAL TUTORIAL! Done it on mine in 90 minutes circa. I had a bit of issues with the cd player (mine came with that above the mzd unit) which does not fit fine with the two new cables. I think I am going to remove the cd player which I never used it and put a mask or a pocket to fill the hole.
Luckily I did not need to do a software upgrade and the car engine started correctly after the upgrade (LOL)
Now I wonder? Is the MZD disconnected from the car engine? If the replaced CarPlay unit turns to be junk or faulty, does the car work without it? (I think so but I'd like to hear other opinions)
Hi, my friend,
Entertainment unit, not effect your engine idle.
Does this work for a Toyota Yaris? I know they have the same body and head unit as the Mazdas
Yes
Hi,
Where can I get this upgrade module? its fit Nov 2015 model ?
Dealer ship mate if not let me know
i already update the radio firmware to the latest on a Yaris IA. i need to buy the hub. where i can get it?
Any dealership or online eBay pls, I don’t have link
Hi Roshan, I have a 2019 Toyota Yaris with exact same radio. How do I buy the correct parts here in the US? Can you tell me the name of the parts you bought? Maybe EBay? Thank you! Great video!
This part I brought it dealership, may be you can buy it eBay or Amazon,
@@vindiroshan thank you!
good
Thank you for the video! Can you please send me the file to do the upgrade firmware?
Hello, I have a yaris IA 2017 and the radio not working. It repeats the start car logo on the screen. What can I do with it? How can I fix it? I cannot change channels only the volume buttons work, nothing else. Pls help
Location pls
Would this work on the scion IA 2016?
it should. Its a mazda 2/toyota yaris.
Please help me ,which cables behind the head unit is for speakers? And can i wire sound converter on them?
Pls tell me you’re vehicle model and unit model
@@vindiroshan Mazda 2 2019 individual 1.5
my system glitches and i dont know what to do now. Should i get it replaced? Where do i take my car to replace it?
Pls tell me your vehicle model and year
Do the steering wheel functions work?
Yes, this is only changing your USB port and software only.
possible to upgrade my stereo system of my mazda2 2015 model?
Yes you can upgrade your stereo but make sure you have mzd screen.
Hi @Roshan T Automotives....
I'm hoping someone out there who knows a lot more than me about this can help. I'm contemplating retrofitting my 2018 Toyota Yaris iA with a software update and usb unit that would allow me to use Apple Carplay and Android Auto with the existing screen.
The 2018 Yaris iA is actually a rebranded Mazda 2. So, can this video be applied to a toyota? Is that right?
Yes
Same procedure but different brand name 😉
Just did it on my 2016 iA
@@keninho1735 Hey! I have a 2019 iA. What part did you use for your car? I can’t seem to find it anywhere. The part number in this video is from Mazda and I’m afraid it might show Mazda logos in my car. Any info is welcomed.
Thanks!
-AC
I am getting ready to try this on a 2018 Yaris iA. Looks identical. I will need to update the software, but I'm game.
This video is vart useful, Where can i get firmware update? Do you have a link to download?
Yes
I can do it for you 70.00.335
i have mazda 2 that doesnt have this mazda navi tablet (headunit), can I request to add this car navi tablet(headunit) directly in mazda store?
Yes you can
@@vindiroshan any estimated price how much would it be? thanks
Price depends on your location in Australia average 650$ with install.
Would this work on a 2019 Toyota Yaris ?
Yes
Did it work?
Do you disconnect the battery first?
No, you don’t need but, you need to be careful.
Hi, where did you find this product?
Where you located my friend
Dealer ship or online
How much for this part ? I’m trying to upgrade my 2017 Yaris IA.
Pls ask your dealer to get right part.
Okay, 😅 haha what is the name of part for I can ask cause idk tbh haha 🥲😅
Apple car play upgrade kit.
I am looking to get carplay installed in my Toyota Yaris iA. From where do I get these parts ?
Where i can find the module with car play ? Thanks
Try your dealer
Got a link to update? On Yaris ia 19' same car everything is mazda 2.
Yaris and Mazda different mate this one only Mazda
Where did you bought this?? Thanks👍
Mazda dealer
Yes mate this genuine install all functions working fine this unit only for apple car play we not replace head unit if you remove head unit yes you need steering wheel plug.
Say ‘easy’ one more time 😂
@@mr_k4tz
🤧🤧🤧🤧🤧
Hello... I have Toyota yaris ia 2017, is this product compatible... my car does not have carolay ninauto android, only SD card navigation...
Yes, you can pls ask your dealership
Greetings, what brand is that car you installed, thanks
Mazda 2
Is there any software upgrade that's required before the installation ?
Yes you must update with latest update 70.00.441
@@vindiroshan Thanks dude 👍
@@vindiroshan where do I go to update it? Like I can't find a link to the update anywhere online, just people talking about it.
@@TFlynnJ
I try my best pls send your email I will send it
@@vindiroshanhi could you send me mazda firmware update ?
Can you share how to update the software?? Pleaseee🙏
Puedes darme la actualización de software del yaris IA 2017, entiendo que se debe actualizar para que pueda funcionar después con el
Radio de Apple Car o android car , de lo contrario no funciona ?
drive.google.com/drive/folders/1CM0C-0OsB6CBxg6_PDvJM0Ej69Y7J3o0
No sé sí ya lo encontraste en este tiempo, pero sí no ahí vienen los archivos para cada región yo recién actualicé el mío (Yaris iA 18) y sin problemas, ahora solo estoy esperando que me llegue el módulo.
OJO que cuando actualices cambiará el color de la interfaz a rojo y aparecerán los logos de mazda, puesto que nunca se actualizó con la versión para toyota , pero vale la pena por tener el sistema actualizado, y aparte que funciona muchísimo mejor con la actualización
my os version is 42.00.500
music database is 00.03.000
can it be done too?
No
You need to update your version mate.
Pls subscribe my channel.
i have mazda 2 demio 2017 skyactive. how to install apple carplay
Follow up my video and before Thant you must update your software with current version.
Were I can Buy that kit??
Thanks
Any Mazda dealer ship
I jyst got a mazda 2 2015 plate and cds wont seem to go in in says label up and it won't go in I put them in upside down and they go in and eject obviously cus they are upside down wot am I doing wrong? Is it knackered
Where you from my friend
im in uk have just got the car@@vindiroshan
@@hangman960
My friend, I think you can try different ways , make sure to up date your software before you do anything.
Me interesa tu trabajo y quisiera saber donde conseguiste eso para poder hacerlo con el mío
English pls
@@vindiroshan he said that he is interested in your work and that he would like to know where to get the android radio so he could do the same to his car
@@morganix007
Any Mazda dealer
The question is where do I buy the parts. I want this for my 2016 scion iA.
did you do it? I have the same car and thinking about installing it, and the parts are in amazon.
@ADwaMoviesandMusicsproduction yes, I can do it
@@vindiroshan my reply wasn't for you, ofc you can do it, you even upload tutorial for us. 😅 Just replying for the other guy. Since you replied though, from what I am seeing, I don't have to remove the stuffs on the shift, and under the screen. And only thing that worries me is if I can really get the wire through(inside).
Thanks so much for your video! Going to give this a try. Could you please send the link for Australian software update? I've subscribed to your channel. Thank you.
now my version is v56.00,can share the link v70.00 download for me? Thanks
Pls subscribe my channel
I just installed this but the touch control dont seem to work in Android Auto. Any ideas?
Check out your connection or software update up to date
Same here just, just check my connections but it seems I'm missing one cable but originally just came with two ports the green and the other ac one :c
@@alexanderfranco3613
One green and blue (it’s depend on country)Australia we using green and blue, other end gray and black
I did some research and apperantly Android Auto just doesnt work with touchscreen in Mazdas. Something to do with the disabling of the touchscreen while driving...
I read that touch doesn't work on android auto on mazda. I also changed it and it doesn't work. And i heard in one video review of android auto. It doesn't work. But if you goto home, the touch works. It is just mazda thing in my opinion.
do you run a business i can pay for apple carplay on my mazda? Im from Melbourne too
Yes I can do for you
Yes I can do it for you
Can you pls tell me what type vehicle model you got and you got a mZD screen
I need to buy the cable 😩 where I can buy it ?
Dealership or online try eBay if not you can get any Mazda dealer spare part
@@vindiroshan Thanks ☺️
If any one need software update pls send your email.
Do you still have the software update ? and how do i install it ?
If you don’t send email , how can I send it to you mate.
What is your email?
Funcionará en el yaris IA 2017, prácticamente es igual? Y donde lo compraste el módulo ?
I’m from malaysia. Do u have the files update?
Yes, pls subscribe my channel and send your email address, I will send it pal.
hi sir, how do i update my firmware.
im using mazda 2 same like in the video but my OS is 42.00.500
Pls send me your email I will upload your update file.
@@vindiroshanHi...I need the file to upgrade my firmware too...my OS is the same (42.00.500)...Thanks
@@juma0219 pls send me your email, I will send it
@@vindiroshan I need you help please...can you send me the file for the upgrade ?
@@juma0219
I told you to send your email
greetings how can I get version 70.335 thanks for putting AppleCare and android auto
I can give you pls send your email.
I sent you the email or they were deleted
send email please
Where you located
@@vindiroshan I'm from Puerto Rico my corduroy
I need help. I want to update to Car Play but I have a Mazda 2 2017
apache 2.0 version. Could i do the update?
Where you located bro Australia or some where? Els
@@vindiroshan Trinidad and Tobago
Version information software on 3.3.0016.0300
I can send Australian version but I am not sure that one help your system.
Our latest one is 70.00.540
Ok how can your send me the version? I will really appreciate it bro
where can i buy this mate?
Location
@@vindiroshan austria
Try your dealership or eBay, I can’t remember the link.
@@vindiroshan Aight cheers!
Can i do this on Mazda 2 2016 skyactiv
Yes any mzd screen yes you can
@@vindiroshan I need help. I want to update to Car Play but I have a Mazda 2 2017
apache 2.0 version. Could i do the update?
@@jertiyathomas8106
Can you pls send your screen type I mean pic?
@@vindiroshan Software information version 3.3.0016.0300
how much this one?
You need to call your dealer ship and ask them pls. This is genuine part, I think it’s depends on your country.
@@vindiroshan 👍
There are four screws only - modern cars are nothing more than lego
I can’t get the nuts out from the screen. They are so stuck that even a drill can’t remove them. What should I do?
Hi
That , inside bolt 10mm , you mean your bolt stuck or damaged. Where you located.
Greetings, it can be connected to yaris 2019, the car is Mazda, the bodywork and the radio, everything is also Mazda, thank you, I await your response.
Yes you can make sure to get same connection and software update correct on.
can have the same connection but how can I have the software updated? How can I be from Puerto Rico?
@@josafetmartinez2786
If you have 70.00. It’s ok but you have 51 or 59 version you must update.
the version is 59
the version of the music db is .07
fail sefe version is 59 as ago to update that
you sell to update thanks
I'm sure I would break 29 out of 30 clips
Oh…
Pls subscribe my channel
easy!
I sent you the email thank you for your help
Do the steering wheel functions work?
This unit only upgrade features not functional change I mean if replaced head unit you need to replaced steering connection and all wiring, all functions work as normal.
@@vindiroshan how much cost the kit? It’s needed also an upgrade of the firmware of the display ...or just change the little new box?!
@@FrankP83
You need to call your nearest Mazda dealer they will tell you.
@@vindiroshan ok. thanks i will do!
I have a scion iA 2016 can I have the software so it can be up to date?
What type of software update you have current software 70.00.63A
Pls subscribe my channel
Where do I download the software?
@@Nodizzle97
Pls subscribe my channel I will tell you