Видео

Miata NA 1990 : two bolds on the outside 👌 . New is not always better .

Update to V70 or latest v74.000.324A version?

How do you get the vehicle telemetry transfer option?

where can i buy this mate?

There are four screws only - modern cars are nothing more than lego

Can you share how to update the software?? Pleaseee🙏

Apple CarPlay keeps disconnecting itself, worked flawlessly for a year after installation. What do you think the issue is? Tried new cable

I was able to achieve this on my Mazda 2 DJ (2017 model) routed the cables through the glove box and underneath the side panels, it was my first time doing it and it was difficult but I was able to get it working 😅

Thank you very much, I have changed the radio by just watching your video 👏👏👏👏👏👏👏 for anyone still want to do it. The way I changed it for Mazda 2,scion IA 2016. 1. You don't need to remove the glove box, just open it and from top of your car screen(after you opened it like the video) slide the cable to the glove box. Once you slide it, it is easier to send it to the new radio. 2. I only removed the radio like the video and didn't remove the shift cover or the one he pulled, just remove the rim around it. Since it is necessary to remove the radio to change it. And it is hard to remove the screw just with screw driver when you remove the unit(the screen part) I used the screw gun. Basically the point is. Remove the radio, remove the unit(where the screen is) and just plug the cables. You don't need to remove parts around the home button or mute.... And I bought the android auto from amazon for $59. And don't forget to tie the cables together, or they will send you a thing to tie it when you buy the radio. And after you plug, before you put it in, I suggest you try if it works, just to not waste time if it is not compatible. You will see the android auto and carplay greyed out. If you try with wrong cable it may not work, it didn't work at first but when I try with another cable it worked. It isn't hard, but ofc you can be nervous if you have no clue but decide to try it just to not pay around $300 for dealers. Good luck, and if you have any question, ask me, I will answer.

I just installed this but the touch control dont seem to work in Android Auto. Any ideas?

i already update the radio firmware to the latest on a Yaris IA. i need to buy the hub. where i can get it?

Hi Roshan, I have a 2019 Toyota Yaris with exact same radio. How do I buy the correct parts here in the US? Can you tell me the name of the parts you bought? Maybe EBay? Thank you! Great video!

Would love to get in touch with you. I have a 2017 toyota yaris IA that i need carplay in.

Hi this is a very useful and clear video. Would you be able to show how to connect an aftermarket reverse camera to the Mazda 2 2015 model. Would be greatly appreciated. Thanks

easy!

The question is where do I buy the parts. I want this for my 2016 scion iA.

Can you add a link to purchase mirror body?

I jyst got a mazda 2 2015 plate and cds wont seem to go in in says label up and it won't go in I put them in upside down and they go in and eject obviously cus they are upside down wot am I doing wrong? Is it knackered

Were I can Buy that kit?? Thanks

Please help me ,which cables behind the head unit is for speakers? And can i wire sound converter on them?

Hello, I have a question. I know that the system of a Toyota Yaris comes from Mazda. Do you know what firmware I must have to be able to install it? Thank you your video is very good

THIS IS THE REAL TUTORIAL! Done it on mine in 90 minutes circa. I had a bit of issues with the cd player (mine came with that above the mzd unit) which does not fit fine with the two new cables. I think I am going to remove the cd player which I never used it and put a mask or a pocket to fill the hole. Luckily I did not need to do a software upgrade and the car engine started correctly after the upgrade (LOL) Now I wonder? Is the MZD disconnected from the car engine? If the replaced CarPlay unit turns to be junk or faulty, does the car work without it? (I think so but I'd like to hear other opinions)

Thank you for the video! Can you please send me the file to do the upgrade firmware?

Gracias lo volví a ver me chocaron y lo arregle yo

Puedes darme la actualización de software del yaris IA 2017, entiendo que se debe actualizar para que pueda funcionar después con el Radio de Apple Car o android car , de lo contrario no funciona ?

Thank you for the video guide. I was finally able to install apple carplay with no issues so far. Only thing is my touch screen is not working for some reason

I sent you the email thank you for your help

very helpfull Video ,thx my Friend !!

I just did it today. I took the lower side panel out and I was not very kind to the old module with a flat head and needle nose plier, after all, that is junk anyway. I used a wire guide from top to bottom and then hooked the wires with a wire hanger shaped into a hook right out where the new module was going to be. Quick and efficient. Only removed the side panel by the accelerator, I did not have to do all that (really took 20 minutes) and my CX-3 is just fine now. Oh and aside from the little sponge stickers I used a zip tie on the two cables so that gravity would pull them down together then I hooked them and pulled them out the hole for the new module. Oh and yes secured with zip ties and the anti-noise padding supplied.

good

Индусятина ебаная! Ребята, не верьте, все нихуя не так как у этих чурок! Весь изматерился пока делал! У него блять все провода по метру длиной, у меня сантиметров по пять, все в натяг, хуй подлезешь! Все приходится делать в слепую, на ощупь! Да, и длинную саблю с панели нахуй отдирать не нужно.

Great video helped me doing my replacement. Just want to add installation of new mirror wiring is tricky. On inside of door frame is 3 black rubber grommet's, simply remove these and with window down you can see the hole that wiring has to pass through so not obstructing the window from up/dn movement. I fed a cable tie through the hole and was able to secure the wiring from mirror to pull right through and out grommit hole and feed it properly in the opening (white plastic cutout) it should be in through the inside of the door . Good luck everybody. Puzzlemanbob

Does this work for a Toyota Yaris? I know they have the same body and head unit as the Mazdas

Hi Roshan T Automotive, where do ai get the softweare from ? looking to fit AA/Car play to a mazda 2 - your videao were very helpfull

Great video. My cx3 hit a snag because the cable for the mirror was tucked behind the molding for the window, so I actually had to take the entire interior black part of the door off, so that I could shimmy it down enough to replace it. That’s not in the vid. Should be done before minute 4:35.

Thanks so much for your video! Going to give this a try. Could you please send the link for Australian software update? I've subscribed to your channel. Thank you.

Would this work on the scion IA 2016?

Hi I was not able to unscrew the 10mm holding the screen, I used a drill screw, and by screw driver still doesn’t work. Do I need any stronger tools?

Would this work on a 2019 Toyota Yaris ?

Beautiful video. Thank you! I followed it and had success. There are some omissions. This video omits the rethreading of the harness, which is tricky. It also omits that he left a lot of broken pop fasteners on the door that would have to be removed to reinstall. I left 7 broken fasteners in the door when I popped this panel. About half of those had intact heads, while the rest broke off an edge. I removed old ones by getting between the metal and fasteners with utility blade to get an edge up, then using some harbor freight yellow plastic trim tools to get under completely and pop them. Even the ones with edges missing can be reused if you just turn them when you put them back on the panel. You can otherwise probably buy 100 on ebay or Amazon for a few bucks.

I’m from malaysia. Do u have the files update?

EL EMBELLECEDOR LARGO NO ES NECESARIO QUITARLO, EL POMO Y LA CONSOLA CENTRAL TAMPOCO ES NECESARIO QUITARLO, ETC. NI SIQUIERA SABES HUTILIZAR LAS HERRAMIENTAS ADECUADAS Y NO VIGILAS NADA DEJAS LA PANTALLA DIRECTAMENTE SOBRE EL PLÁSTICO Y PARA MAS INRI PASAS EL CABLE DE ABAJO HACIA ARRIBA, SEGURO QUE ESTA TODO RALLADO. NO SÉ NI PARA QUÉ TE PONES GUANTES. LO PEOR DE TODO ES QUE CREO QUE ESTAS EN UN TALLER. COMO PARA DEJARTE EL COCHE A TÍ. CHAPUCERO 🤦🤦😎

Great video. I have a (2014)Mazda 3 I am looking at trading in, I was wondering if I take out the apple car play module and replace it into my wife’s (2015)Mazda 2 are they both compatible with each other? Including the oem module to replace back into my car? Thanks.

Hello... I have Toyota yaris ia 2017, is this product compatible... my car does not have carolay ninauto android, only SD card navigation...

my system glitches and i dont know what to do now. Should i get it replaced? Where do i take my car to replace it?

Do you know where can I buy the piece? In official Mazda they request me 1500€ which is a savagery

Where i can find the module with car play ? Thanks

I just purchased the new Mazda console for my 2017 cx3 thinking I was capable, but this is horrifying! Definitely going to pay for the service now. Thanks for posting!

my os version is 42.00.500 music database is 00.03.000 can it be done too?

If any one need software update pls send your email.