How to get sequence 2 to stop when sequence 3 starts, (if you are talking bout the sample) put a note that is in same mute group and lower volume to 0, and put it on 1-1 of sequence 3, that will mute the previous sample from playing … If this is what you are asking
Thx for the video. Let me share a tip with you in return: when arranging in Song Mode, if you press Record you can enter the pads shown above in your desired order without having to press Insert and then turning the big knob to find the right sequence. 😎
The tailing sample carrying over to the next sequence is something i hate also. Only way I've found to fix it is to set the last sample as "note on" but then make sure it finishes just before the sequence ends. Love your stuff bro 🙏🏻
I was like..ok I will learn how to sample..then I saw the complete video and gave up lmao. I have been watching your videos for around 2 hours and my sample never started
Depends what you mean by "everything". It's a complete music production workflow package, and is often referred to as a "DAW in a box", but you may want to integrate other instruments/MIDI devices for additional sounds, or output your track/performance into a PC DAW to have further options around mixing/mastering your final track
hey man , when you rec the sample BOUNCE it and re-rec it as a one wave ,after erasing the midi notes ,that will prevent it from leaking into the next SQ.
Wenn du nicht willst, dass das Sample in der nächsten Sequenz spielt dann setz doch am Ende der Sequenz einfach ein Teil vom Sample mit Automation Volumen auf 0, dafür muss das Sample Mono sein.
On the samples playing out and into the next sequence... I've also always wished there were a better way. All I usually do is automate the pad volume right at first of that sequence. When you return to the first sequence, it should jump back up where it was at. It's probably better to edit the sample to eliminate the tails... you know, copy pad and edit, then use that pad as the last one, instead. Still, just listing all the annoying ways you probably already know.
@@Marrcello I just put an empty pad in a mute group w/ it and hit that, if I don't mind an abrupt stop (add some short release (70-ish) to them, if not). Otherwise, I tend to go for "note on" for everything. I work a lot in the grid, though, so I don't mind cleaning up in there.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
That actually goes hard for a track from the 1950’s and from Indonesia no less.
Good stuff, man 👍🏽
Right!? I really dig it 😌🔥 thanks man!
its giving massive timberland vibes
How to get sequence 2 to stop when sequence 3 starts, (if you are talking bout the sample) put a note that is in same mute group and lower volume to 0, and put it on 1-1 of sequence 3, that will mute the previous sample from playing …
If this is what you are asking
Holy shit. This went hard
Bro this is geil af. Dope sample and a nice creative, smooth beat. Keep up the good work!
Another Dope vid, Love these and the whole beat process style. This beat was 🔥🔥🔥 too!
Thanks a lot, I appreciate you tuning in🙌✌️
This is pure fire!!!! Thanks for the videos!
If you visit Porto in Portugal say something. I would like to offer you some wine to compensate what you gave 🎉 😎
🙏🙏🙏 I will ! If you want, shoot me an email, so I have your contact ✌️
info@marrcello.de
Thx for the video. Let me share a tip with you in return: when arranging in Song Mode, if you press Record you can enter the pads shown above in your desired order without having to press Insert and then turning the big knob to find the right sequence. 😎
thanks for the tipp! I once read it in the mpc bible but forgot it again, will definitely use it next time 😌
Love it
Keep em coming
Thanks man! 😌
For your question - You can turn a certain program group or sound to mute another. Just go to program group edit and see in global
Oh nice, gonna try that. Thanks 😊
Marcelo you symply the best to making beat !!with mpc one ! So cooool man !!!
Thank you so much !!
The tailing sample carrying over to the next sequence is something i hate also.
Only way I've found to fix it is to set the last sample as "note on" but then make sure it finishes just before the sequence ends.
Love your stuff bro 🙏🏻
This right here. Easiest way. Short and simple
Tough! Love the bounce.
Thank you for this very helpful instructional video.
Hello from Indonesia !
Do you know what this song is?
Do you know what this song is?
Sounds good ❤
Better than some dopamines 🌅 keep going 🔥🔥🔥
🙏🔥🙌
You really mastered that MPC one
Not yet fully :) 🙏🙏
great as usual, you the man
Same question
I copy the pad and make it a “note on” pad, then go into grid and make sure note end length reaches right spot for sequence transitions.
FIRE! Strait ARSONAGE!
Dope flip! Early 2000 vibe, I can hear Fat Joe spitting on this! Awesome work man 👊🏻🔥
Thanks man 😌✌️
I think you just convinced me to buy an mpc
Incredible, very informative. 👍
Heißer beat und fetzige raps digga! 🔥
Danke dir 😌😌
Great guy
Schönes Ding!
to keep sample(s) from bleeding into next sequence trim the tail of the sample or take poly of the sample or even use the Decay.
Can I ask what cable are you using to plug in the i-phone ?
What do both ends look like on the cable please and thanks for your tutorials.
I would like to know as well
1/8" jack stereo to 2 x 1/4" jack mono
That app is just called “radio”? Cuz I’m having a hard time finding it… what company is it by?
Radiooooo.com
:)
You can edit the audiotail in Sample edit. Simply shorten it and you're done
Du hast es drauf ✌️
15:07 maybe retrigger the sample with zero velocity (or cut it off mute style with a silent sample) at the beginning of the bar
Yeah that’s a good workaround ✌️
@3:49
How did you add the effect to the ENTIRE program?
Sound great
Thank you!!
I was like..ok I will learn how to sample..then I saw the complete video and gave up lmao. I have been watching your videos for around 2 hours and my sample never started
Yo beats 🔥🔥🔥🔥🔥🔥🔥
Thank you!!🙌🙌✌️👊
Hey, really nice video ! Thanks a lot. Can someone please remind me the name of the app? I'm struggling to find it!
Hi, I wanted to know if with mpc I can do everything completely without needing a PC.
Depends what you mean by "everything". It's a complete music production workflow package, and is often referred to as a "DAW in a box", but you may want to integrate other instruments/MIDI devices for additional sounds, or output your track/performance into a PC DAW to have further options around mixing/mastering your final track
How did you know the key by ear? Of sample.
Mahlzeit und danke mit Gruß aus Köln
fire!!!!
Sehr nice.
I drove a pinto huffing indo with tinted windows blackened bumping a Indonesian beat with Russian sounding rapping
🚙🎶 these are great lyrics!!!
Is the Pinto still running? That’s awesome if you really have one!
hey, what is the app you are using?
HI, wo bist du ? warum keine neues video inyou tube kommen? kannst du klar sagen my freund,
Dope video. Exactly what radio app did you sample from? Who created it? Thanks
The app is called radiooooo
I started bouncing just like you when i heard that Indonesian song first come on..😂😂😂😂😂😂
hey man , when you rec the sample BOUNCE it and re-rec it as a one wave ,after erasing the midi notes ,that will prevent it from leaking into the next SQ.
Really good dude, keep it up 🎉
Just one question- for the video making process, how do you record the audio from the MPC as well as your voice?
Thanks Tom! I route the audio from the mpc outputs and the mic into my Scarlett 4i4 interface and record both tracks with Ableton live..
What cable do you use! When yourun the phone too the mpc
Wenn du nicht willst, dass das Sample in der nächsten Sequenz spielt dann setz doch am Ende der Sequenz einfach ein Teil vom Sample mit Automation Volumen auf 0, dafür muss das Sample Mono sein.
Interessante Variante ! Danke ✌️
What was the app you used on your phone?
Radioooooo
can the app found on IOS?
Fire!
Thank you Andy😌
JEFÄLLT MA!
😉😌👌
Hey man, are the flute, harp etc. from an expansion pack?
Brother, I have one question mainly can I connect the mpc one with monitors without the interface or how did you connect it?
I route the audio from the mpc outputs and the mic into my Scarlett 4i4 interface and record both tracks with Ableton live..✌️
U can directly plug the mix one into speakers. 1/4 cables is all yuh need.
I’m looking for that Radio app. Got a link? Thanks.
Radiooooo.com
✌️✌️
:3 Hot! Fellow musician. Shalom.
What app is that for radio I don't see it
its called radiooooo
It’s an app and a website
🔥🔥🔥🔥🔥
Tc legato and put sample.program on note on
Thanks, that’s a pretty easy workaround 😌
On the samples playing out and into the next sequence... I've also always wished there were a better way. All I usually do is automate the pad volume right at first of that sequence. When you return to the first sequence, it should jump back up where it was at.
It's probably better to edit the sample to eliminate the tails... you know, copy pad and edit, then use that pad as the last one, instead. Still, just listing all the annoying ways you probably already know.
Yeah exactly those workarounds are so strangely complicated ^^ thanks though😌🙏
Just use note off for the last sample/pad playing on your sequence and length the note to the end of the sequence on the grid.
@@Marrcello I just put an empty pad in a mute group w/ it and hit that, if I don't mind an abrupt stop (add some short release (70-ish) to them, if not). Otherwise, I tend to go for "note on" for everything. I work a lot in the grid, though, so I don't mind cleaning up in there.
oh shit Oo
Is the 2.0 your latest drum kit?
Yess😌
@@Marrcello awesome I'll be getting this ASAP.
🙏🙏🙏tell me how you like it!
I will
hey, what is that app?
Radiooooo.com
✌️
fayaaaaaaaaaaaaa
🙏🙏🙏
ich lass es nicht zu wie dicke leute kühlschränke 😂
indonesian when indonesia mentioned: 🥹🥹
Redman & meth on this beat
😌🔥🔥🔥
Шляпа какая-то
🔥🔥🔥🔥