Just bought a v touch, moved over from a dx9.. bought 2 neos also.. nothing but agro trying to download all the stuff required and now the touch is stuck on a page i cannot get out of
quick important question If I just got a used radio and i still had to set it up to my new helicopter align 700e do or should i reset the radio if there are any new updates for it or should i just leave it alone
@@laughingstill I am not realy liking this system at all and ready to get a beast ar7210 . i can adjust my head speed and also gradually increase my head speed in idle up mode i am i corect in understanding with vbar you just hit motor run and make sure tyour center stick no idle up contol with the throtle? in other words i cant adjust a throtle curve in bank 1 to say 0 rpm 25 rpm 50 rpm 75 rpm 100 % rpm. I CAN do that with spectrum
There is no need for a “normal” mode with an electric helicopter. The esc handles the soft spool up. You never fly in normal mode and if you do and try and go inverted you crash. This way you have three banks to control. Just leave the collective in the center, hit motor run, and the esc handles the rest. There is a normal mode for nitro Governor which is the only heli needs it..
@@laughingstill when you have somethig set wrong oroff with a heli and you spool it up to fast it leans over and self distructs like what almost hapened to me last night one of the cheap hk servos the tail servo burnt out or wqas already bad i replaced it with an align tail servo from my 50 nitro and i guess i didnt program its different frequency into the tx and the heli did a ground spin thank god i caught it on time and shut down good thing i only had a 6s plugged in. i wont dare try this helicopter unless i know everything is good to go and i have decent servos in it. preferably align.. the thing i like about my dx6 is if im unsure of my helicopter especially after a repair i can feel the heli and spool up nice and easy its also easy to lower or change the pitch curve or i meant to say throttle curve
Joseph Rueck Mikado’s wizard, of the directions are followed, will make sure you never have the setup incorrect...especially the tail. Check out my tail setup video that explains how to know for absolute certain if your tail is setup right. You can also talk to me directly with MikadoUSA’s technical support line at 1-844-4MIKADO ext 2 M-F 10-4 est.. leave a message if I don’t answer as I do tech support on the days I am not at the Fire Station. I’ll call you back the next day. I am willing to walk you through the whole setup if you like!
Trying to register my Mikado, unfortunately I believe i pressed the skip button on the wizard, gues i was too excited. The only thing i cannot find in the settings is how to register. Where would I find this now?
For anyone else who needs to know, I figured it out, go to apps and a QR code will popup to take you to the applications options. This will also allow you to register your device
I`m trying to register my v bar touch radio and I`m having trouble registering it. I tried the serial number on the radio screen and that did not work..it is asking for the model number .I tried the number that is on the box. And that did not work Can you help me with this.
Thanks for the vids! It's my first time using vcontrol, coming from dx9 and beastx. Please help! I was prompted to create a mikado account after trying to log into vstabi. For mikado account I used my name, email, and a password. I can log in and out no problem. When I try to log into vstabi it asks for a user name and password, and will NOT accept. I know I have the same correct password. Dont think that's my issue. What is the user name that vstabi is asking for? My email? First last name? Further more I have tried all three of my emails, created mikado account with password. Nothing works. Tells me unrecognizable user name or password. I left message with vstabi, waiting for response. I'm terribly frustrated, do you have any suggestions? Thank you so much for you time and vids, I watch all of them, great help!
Man I feel stupid! Damn rookies! Thank you so much for your help. Can I communicate on a different social platform with you elsewhere for questions I might have? By the way i LOVE this radio it is so simple and am eager to use it. Thanks bunch!
Just bought a v touch, moved over from a dx9.. bought 2 neos also.. nothing but agro trying to download all the stuff required and now the touch is stuck on a page i cannot get out of
quick important question If I just got a used radio and i still had to set it up to my new helicopter align 700e do or should i reset the radio if there are any new updates for it or should i just leave it alone
Joseph Rueck no need to reset, just assign the switches how you like them, add any apps that you think you might need, calibrate the sticks and go!
@@laughingstill I am not realy liking this system at all and ready to get a beast ar7210 . i can adjust my head speed and also gradually increase my head speed in idle up mode i am i corect in understanding with vbar you just hit motor run and make sure tyour center stick no idle up contol with the throtle? in other words i cant adjust a throtle curve in bank 1 to say 0 rpm 25 rpm 50 rpm 75 rpm 100 % rpm. I CAN do that with spectrum
There is no need for a “normal” mode with an electric helicopter. The esc handles the soft spool up. You never fly in normal mode and if you do and try and go inverted you crash. This way you have three banks to control. Just leave the collective in the center, hit motor run, and the esc handles the rest. There is a normal mode for nitro Governor which is the only heli needs it..
@@laughingstill when you have somethig set wrong oroff with a heli and you spool it up to fast it leans over and self distructs like what almost hapened to me last night one of the cheap hk servos the tail servo burnt out or wqas already bad i replaced it with an align tail servo from my 50 nitro and i guess i didnt program its different frequency into the tx and the heli did a ground spin thank god i caught it on time and shut down good thing i only had a 6s plugged in. i wont dare try this helicopter unless i know everything is good to go and i have decent servos in it. preferably align.. the thing i like about my dx6 is if im unsure of my helicopter especially after a repair i can feel the heli and spool up nice and easy its also easy to lower or change the pitch curve or i meant to say throttle curve
Joseph Rueck Mikado’s wizard, of the directions are followed, will make sure you never have the setup incorrect...especially the tail. Check out my tail setup video that explains how to know for absolute certain if your tail is setup right. You can also talk to me directly with MikadoUSA’s technical support line at 1-844-4MIKADO ext 2 M-F 10-4 est.. leave a message if I don’t answer as I do tech support on the days I am not at the Fire Station. I’ll call you back the next day.
I am willing to walk you through the whole setup if you like!
Thanks for these Ron!
Trying to register my Mikado, unfortunately I believe i pressed the skip button on the wizard, gues i was too excited. The only thing i cannot find in the settings is how to register. Where would I find this now?
For anyone else who needs to know, I figured it out, go to apps and a QR code will popup to take you to the applications options. This will also allow you to register your device
I`m trying to register my v bar touch radio and I`m having trouble registering it. I tried the serial number on the radio screen and that did not work..it is asking for the model number .I tried the number that is on the box. And that did not work Can you help me with this.
Thanks bro! I just got my control yesterday. What’s your IG?
Did you call yesterday?
Good grief, I take a Heli-Sabbatical and there’s a new V Control uh oh better hide my wallet.
Thanks for the vids! It's my first time using vcontrol, coming from dx9 and beastx.
Please help! I was prompted to create a mikado account after trying to log into vstabi. For mikado account I used my name, email, and a password. I can log in and out no problem.
When I try to log into vstabi it asks for a user name and password, and will NOT accept.
I know I have the same correct password. Dont think that's my issue.
What is the user name that vstabi is asking for?
My email? First last name?
Further more I have tried all three of my emails, created mikado account with password. Nothing works. Tells me unrecognizable user name or password.
I left message with vstabi, waiting for response.
I'm terribly frustrated, do you have any suggestions?
Thank you so much for you time and vids, I watch all of them, great help!
Tobias Miller sorry for your frustrations but you have to create the account with Mikado Germany, not MikadoUSA. The site it shop.mikado-heli.de
Please make video on airplane or jet, also wiring?
Leo Nguyen Kyle Dahl will be making one soon :)
thanks for the videos btw
Man I feel stupid! Damn rookies! Thank you so much for your help. Can I communicate on a different social platform with you elsewhere for questions I might have?
By the way i LOVE this radio it is so simple and am eager to use it.
Thanks bunch!
Sure! Email me at vstabi@mikadousa.com or find me on Facebook under Ronald Thomas