I run Bowtechs with the Epsilon, just saw this and I will be buying Two or three. (The extended bolt opening for a second attachment point along with the pre-load touch downs were the very things I felt missing when I mounted my first Epsilon. )
Very Smart Idea, Love It!!! There's a reason I follow you Josh. There's a reason I opened an archery shop in our small town. The reason is your inspiration and knowledge. Which has excelled my tech and shooting abilities. Don't ever stop doing what your doing. I hope those hats arrived.. Cheers
Outstanding work MFJJ! I’ll bet you sell a pile of them after the new bows launch. A lot of guys are already dialed for this season, but will want one once it’s time to outfit next years bow. I am in that camp.
I’ll be buying one of these. I run an epsilon on my Reckoning 39. Not being able to run two full sized bolts drives me nuts, and the bolt together brackets aren’t my favorite. The rest of the rest is absolutely gold though. Awesome job Josh! @Podium Archer
I love all your content and y’all have asked for ideas for videos. It would be cool to do a set up build for everything meaning you use the same bow, arrow, release, rest , sight for target, 3d, and hunting. It would also be cool to see a high end, mid range and budget version of this
I like it I’ll pick that up when I get my bow from you I’ll have to go to you from NY don’t know if I can order it from you on line? Hoyt RX8 Alpha x 30 Ethos or Mathew’s lift
Any reviews on the trophy ridge digital 3 pin model? I'm a whitetail hunter and have always used a 5 pin but want more now. Even if it's just for target
Anyone had issues with the hybrid hunter micro wearing the launcher out after 300 shots? Metal is showing through the plastic…. Should I buy that g flex launcher?
I think it’s pretty ridiculous I spent $50 for a piece of aluminum and it doesn’t come with any hardware for mounting to my bow. I think you were extremely misleading with your previous social media post. How did you not think to mention you’re not providing hardware on a $50 part? If I had to do all over again, I wouldn’t have purchased this. A little Loctite on the factory bolts are a hell of a lot cheaper and probably works just as good.
I haven’t bought a single thing for a bow since 2017. But I still watch the vids.
Not even arrows?! 😱 Arrows come to me to DIE
I run Bowtechs with the Epsilon, just saw this and I will be buying Two or three.
(The extended bolt opening for a second attachment point along with the pre-load touch downs were the very things I felt missing when I mounted my first Epsilon. )
Very Smart Idea, Love It!!!
There's a reason I follow you Josh.
There's a reason I opened an archery shop in our small town.
The reason is your inspiration and knowledge.
Which has excelled my tech and shooting abilities.
Don't ever stop doing what your doing.
I hope those hats arrived..
Cheers
Good job solving a real problem when the manufacturer doesn’t. 👍👍
Great idea! The less things to come loose the better. Nice to see improvements on existing products.
I ordered one as soon as you put them up. Thanks Mfjj
having just bought this bracket, the video is much appreciated. i couldn't get 2 screws into it though. running a bowtech sx80.
Nice problem solving!!! Great modification!!
Absolutely!! Awesome idea!!
Love it! It’s awesome, just got mine.
Great idea! I was just installing my Epsilon last week and was wondering why there was the extra complexity.
You fixed the issue I was having. I'll be buying some in a couple weeks
Outstanding work MFJJ! I’ll bet you sell a pile of them after the new bows launch. A lot of guys are already dialed for this season, but will want one once it’s time to outfit next years bow. I am in that camp.
Yes great idea my trophy taker only had room for one bolt on my bowtech I definitely want to upgrade to a hamskea
I want one! I will definitely b hitting you guys up when I get my new bow.
I’ll be buying one of these. I run an epsilon on my Reckoning 39. Not being able to run two full sized bolts drives me nuts, and the bolt together brackets aren’t my favorite. The rest of the rest is absolutely gold though. Awesome job Josh! @Podium Archer
I love all your content and y’all have asked for ideas for videos. It would be cool to do a set up build for everything meaning you use the same bow, arrow, release, rest , sight for target, 3d, and hunting. It would also be cool to see a high end, mid range and budget version of this
I love the idea. I bought them for both my bows...
Been having this issue for a while. Gonna have to get this. Thanks mfjj
Looks like a great solution
I bought one to be able to torque tune. Way better than the standard mount!
Nice job Josh!
Love the idea and wish my vertix had the mathews mount
Super smart. My came loose very shortly after being professionally installed. This one piece would have prevented that.
Great idea. Always look forward to your videos. How about that draw board on the press that’s another brilliant idea.
That's awesome, well done!
Great Job 👍
Awesome!
I like it I’ll pick that up when I get my bow from you I’ll have to go to you from NY don’t know if I can order it from you on line? Hoyt RX8 Alpha x 30 Ethos or Mathew’s lift
Great job, next will be your on bow with all the parts made better.👍👍
I will never understand why nobody does the rests so you can actually use the both bolts, so much better with 2. This is great product!
Love it!
Will this work on a left handed bow tech? I was about to go red locktite, this is a legit solution. Well done!
Great idea
Any reviews on the trophy ridge digital 3 pin model? I'm a whitetail hunter and have always used a 5 pin but want more now. Even if it's just for target
great product
Are you going to make a center mass attachment for the Hamskea
If I order that from your site with the Epsilon together will it come with the correct mounting screws?
Ill just stick with my Trinity 😂. What's up with the bow giveaway?
Thats a great idea
Does it also work kinda like an overdraw, so to speak?
Do you ship these to Australia?
Fuckin brilliant that’s why he’s MFJJ
What about that draw board on your press?
Can I use this on my VXR for the sight
Thanks for the vid! Will this work on the trinity and primer rests as well?
I was wondering the same but I see you never got a response. 🤔
@@blgulzow I don't believe it does, but it will work on the new Everest.
Will it work for a left hand rest?
Smart idea
Anyone had issues with the hybrid hunter micro wearing the launcher out after 300 shots? Metal is showing through the plastic…. Should I buy that g flex launcher?
product is great, standalone pricing isn't. Regardless, appreciate what you're doing for the industry.
It looks ambidextrous
Will this bracket fit on my bowtech realm ss
Will this work on a switchback xt?
Dig it.
I think it’s pretty ridiculous I spent $50 for a piece of aluminum and it doesn’t come with any hardware for mounting to my bow. I think you were extremely misleading with your previous social media post. How did you not think to mention you’re not providing hardware on a $50 part? If I had to do all over again, I wouldn’t have purchased this. A little Loctite on the factory bolts are a hell of a lot cheaper and probably works just as good.
Seems legit
The only stupid part is that Hamskea didn't do it to begin with! Great product solving a real problem
Here's a cheaper way to keep it from coming lose. Dental floss on the threads. You're welcome
Save your money and get a whisker biscuit.