Creating and Machining Tabs in Mastercam

[@stefanholzel1788]

Great Job! I know Mastercam since almost 20 years. But the tab edit was completly new for me! Thanks a lot.

[@CamInstructor]

Glad it was helpful!

[@romanmiazga4979]

I think it’s 121
Very straightforward and informative video. I’m eager to learn something new every now and then. Please keep them coming
Thx

[@CamInstructor]

Thank you! Will do!

[@heyjeeery7587]

Nice, I have never seen any programmer use this option, but now I see the use for it. I've seen the tab option in mastercam and bobcad but until now. WOW cool thanks

[@CamInstructor]

You're welcome!

[@cristinelpricop]

I think it's 198. I was one of them...until now. You did a very good job with this video. Thanks.

[@CamInstructor]

lol glad to get you switched! 198, right on the limit!

[@ayrton9911]

I think it is 150...all your videos are packed with really great tips. Thanks.

[@CamInstructor]

Glad you like them!
150 might be it!

[@bgasson]

I think its number 149, I have never used tabs as I thought they would be complicated, thanks for a great video.

[@CamInstructor]

Glad it was helpful!

[@danvdb2747]

I think it’s 142. Great demo really enjoy watching and learning Mastercam with your videos!

[@CamInstructor]

Thanks! Glad you like the vids!
142, you may be onto something!

[@sebastiantaylor2600]

Great video!!!!! I used to make the tabs by myself a few months ago until I discovered tabs. Cheers from Argentina!!!! I think it's #139

[@CamInstructor]

Definitely a useful feature! 👍🍺

[@cuttingcnc9111]

I think its 105. Great info as usual. Appreciate the breakdown. Did not know about the square points.

[@CamInstructor]

Thanks! Square points is an odd one.
105 might be it!

[@RichardThomas-db2pw]

I think its 82!! Great video as always!!

[@CamInstructor]

82....wait a min. :)

[@snaveenkumar3734]

Does master cam or similar softwares require a dedicated graphics card ?

[@CamInstructor]

You can run without but you will not have great results especially if you get into complex parts/toolpaths. Should note that running without a dedicated card is not a supported configuration by Mastercam (basically you may have problems resulting from this that they cannot account for or fix)

[@user-ru3ys7bh6v]

I think is 120 Great video ,Great way of learning please keep it up

[@CamInstructor]

Thank you, I will

[@AhmedMohamed-yj3kt]

Any video on how to do the same in powermill?

[@CamInstructor]

I don't use powermill, sorry.

[@K-DaK]

I think it's 196. Can't get enough of it.

[@CamInstructor]

196, might be it!

[@georgeoconnor2680]

Great viddy-O..thanks for sharing!

[@CamInstructor]

Thanks for watching!

[@michaelHaasF1]

Great video, never knew about the ability to edit through the chaining manager, thanks! 125

[@CamInstructor]

It is odd that functionality is not in the main toolpath menu.

[@ledanh9467]

Thank you very much!

[@miguelrodriguez7474]

I think it's 150 Thank you for your excellent work...👍

[@CamInstructor]

Thanks!

[@hradford55]

Analyze chain will give the 3d length of a chain, on the screen, without the text editor opening.

[@CamInstructor]

always more than one way to skin a cat in Mastercam

[@shanxxs]

well explained, good job.

[@CamInstructor]

Thanks!

[@jayasinme]

I think it's 372. I like your videos! Very helpful 👌

[@CamInstructor]

Thanks for the feedback, glad you like em and find them somewhat useful! 👍
372...hmmmmm

[@Engineered2Detail]

I think you're a bit high

[@gumdamsniper]

I think it's 2x. I don't skip video endings much, but I do watch them at 2x speed. If I ever meet you in person it will be weird since my mind will be geared towards hearing you speak so quickly.

[@CamInstructor]

lol you really have to concentrate to understand when playing back at 2x speed. Even watching myself where I know what I'm about to say, its tough!

[@Rossliwqq]

Tanks you for you effort to do this video, very helpful and clear 👍👍⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ ❤️❤️I'm from Malaysia 🤝🤝 I think no #144

[@CamInstructor]

Glad it was helpful!

[@dbcarroll19]

Thanks, very helpful and understandable. 187

[@nasrahmed6236]

Thanks alot

[@golfprocrastinator9519]

I think it was 186. All the best. 🙂

[@zitronbolikov2900]

Hello, thank you for your tutorials, we understand well because explain you very well ... just a small question is' it possible to put subtitles translated into French sa would be very nice on your part in any case thank you really for what you do and very good continuation, we are looking forward to new tutorial…

[@CamInstructor]

Translating into different languages is extremely hard, especially when you don't speak the language 🙂...even though I did take french in school, I never really got good at it.
There is a solution though. You can use Googles auto translate. Its just not obvious on where to turn it on. At the bottom of the video, click on the gear icon, where it says subtitles (most likely set to off right now) you may need to choose English Auto Generated first. After selecting that, click the gear icon again, this time under subtitles you should see an option for Auto Translate. French should be an option in there. Just know the translating will not be 100% accurate but its the best we can do.

[@danielywlyang1390]

I think it is number 168 and this tutoral is very useful .

[@CamInstructor]

Thank you! Cheers!

[@-ayoubabala]

I think is 177 , seem good to me 👍👍

[@CamInstructor]

I agree, 177 does seem good

[@man2shrndz528]

👌

[@policebox1092]

Awesome

[@CamInstructor]

Thanks!

[@JohnKraljic]

I think it's 149
Great video!

[@CamInstructor]

Thanks!

[@phamtao2351]

Nice

[@AM-ez2ns]

I think it's 122, very helpfull thanks

[@CamInstructor]

Thanks for watching!

[@EDDYCAD_CAM]

so grateful n i think it's 200

[@vimaldesai4884]

I think it’s 74 .great video 👌

[@CamInstructor]

Thanks!
74...wait a minute

[@davidy1382]

I think it's 142
Thank you for an informative video

[@CamInstructor]

You're welcome!

[@CamInstructor]

Guess what! You've won one of the shirts! Send us an email and we'll arrange shipping.
[e-mail]

[@WK-lc8kg]

I think its 127. Great video thanks.

[@CamInstructor]

Thank you!
127 sounds like a possibility.

[@tracykumfer6937]

I think it is OU812

[@CamInstructor]

Hmmm, OU812?

[@davidbesker3987]

I think it's a 119.

[@CamInstructor]

119, I think a couple others are going with that as well

[@kevquang23]

Thanks for the great video!! I think it's 168

[@TheGuitar247]

Thank you for the great content, I think it's 165

[@CamInstructor]

You're welcome! Thanks for watching.

[@Odietmb]

I think it is 122

[@CamInstructor]

122 just might do!

[@nasrahmed6236]

99%❤❤

[@Wirybird88]

I think it’s 189

[@CamInstructor]

189 seems legit

[@Wirybird88]

@@CamInstructor haha thanks for your videos, I always learn something from them

[@InDaBarn]

I think it is 155.

[@CamInstructor]

155 might be

[@albertusariwibowo7114]

i think its 123,,great video

[@CamInstructor]

Thanks!

[@donjones7232]

I think it's 178

[@CamInstructor]

178 could be!

[@michaelgraham8494]

I really think it's 189.

[@CamInstructor]

I can get behind 189 too

[@stevechichester697]

I think it is 125

[@CamInstructor]

125 is a reasonable number to go with!

[@clintdomangue6029]

I think it's 149.

[@CamInstructor]

Thats a solid choice

[@edguitar644]

I think that its 165

[@CamInstructor]

Hmmm...sure about that?

[@gillisdebilio4516]

I think its 139

[@CamInstructor]

139 could be it!

[@goofyinestherville]

I thinks it’s 149

[@Houcnc]

nah think im getting shot lol

[@DJ-yp4kc]

I think its 122

[@CamInstructor]

122 is a good choice!

[@chriscolway8935]

I think it's 147

[@CamInstructor]

147 is a solid choice!

[@johnhudson5135]

Its #177

[@bajasoobnut]

I think it's 137

[@CamInstructor]

137 makes sense!

[@jamiemudge9212]

I think it’s 151.

[@CamInstructor]

151 is a solid number!

[@richardzicarelli3193]

I think it’s 50

[@CamInstructor]

50? Wait a minute...

[@richardzicarelli3193]

I really don’t know… You said just pick a number. I really do enjoy your videos. They are very educational and cleverly done.

[@CamInstructor]

@@richardzicarelli3193 I'm just playing around. Thanks for watching and taking part. Glad you like the vids!!

[@nejcgaspersic5637]

I think it is over 9000 xD

[@CamInstructor]

Over 9000, wait a second...

[@Sacengine72]

I think it's 72

[@CamInstructor]

72? Hold on now...

[@bobstover-w7j]

GREAT JOB I THINK ITS 113

[@TheMrDuffie]

I think its 143

[@CamInstructor]

143 could be!

[@Engineered2Detail]

I think it's 77

[@CamInstructor]

77...wait a min

[@MaorCohen-wc4xk]

I think that is 183

[@CamInstructor]

183, it might be!

[@chazz.zaragoza.9561]

I think it's 111 👌

[@CamInstructor]

You might be onto something!

[@Bdod1124]

I think its 187

[@ipadize]

187 Strassenbande

[@CamInstructor]

187, couple others agree with you here

[@justinmoritz6543]

I think it’s 169

[@CamInstructor]

169 could be it

[@danielkiss5052]

I think it's 112

[@CamInstructor]

112 might be the one

[@NaskoNikolov]

I think it is 110

[@CamInstructor]

110 is a good choice!

[@SukhwinderSinghNatt]

I think it's 120

[@CamInstructor]

Is this the Price is Right strategy?

[@SukhwinderSinghNatt]

@@CamInstructor o yeaaa

[@lsflores1976]

I think it's #169

[@Universe_lord_rahul]

I think it's 133

[@CamInstructor]

133 might be it

[@DK-hy2ev]

I think it's 144

[@CamInstructor]

It very well could be!

[@johndennis3181]

I think it's 199.

[@ayoubchokrallah]

I think it's 92

[@CamInstructor]

92? Not sure about that one

[@misterwilling]

I think it 124

[@CamInstructor]

It might be!

[@missysnores]

125

[@stephensumpter2772]

I think it’s 199

[@CamInstructor]

Right at the limit!

[@archielxxx]

I think it's 137.
Had to combine my 2 lucky numbers. 😁

[@CamInstructor]

100 and 37, or 99 and 38, or 98 and 39, ........

[@CamInstructor]

Guess what! You've won one of the shirts! Send us an email and we'll arrange shipping.
[e-mail]

[@patelketul649]

It's 149

[@CamInstructor]

I like the idea of 149

[@ipadize]

I think its 69 i dont know what it is though because i havent watched the video yet

[@CamInstructor]

ha! you might be allowed a second guess then

[@ipadize]

@@CamInstructor i think its 127

[@paniko9556]

It’s obviously 169.

[@CamInstructor]

It very well might be 169

[@tomaszerszkowicz4281]

174

[@conceptsken1]

I THINK 177

[@CamInstructor]

177 is a good choice

[@johnmjordan2059]

I think it"s 167

[@CamInstructor]

167 sound like an option

[@donsmith4878]

i think it's 123

[@CamInstructor]

123 is a solid choice

[@speckim]

tal rak - machine prohibited

[@CamInstructor]

Not sure I understand. Care to explain a bit more?

[@kiriukurozaky2653]

I think it’s #111

[@CamInstructor]

Seems to be a popular choice!

[@alisaad-fl6bq]

I THINK IT'S 199

[@ramirodelatorre435]

100%

[@ripawheelie8981]

I think it's 20000%

[@CamInstructor]

20000....wait a min

[@kylegordon415]

i think its 111

[@CamInstructor]

I can agree with 111

[@gilbertohernandez191]

200

[@themanimal01]

All this talking of tab made me thirsty.
I thinks its 187.

[@CamInstructor]

Tab...do they still make that stuff? lol
187, might be it!

[@lweeong]

15o

[@cpieler24]

100

[@CamInstructor]

The Price is Right bid

[@부엉이형-r8t]

국뽕에 취한다 주모

[@CamInstructor]

Not sure what this means even after translating