MOD-10 Asynchronous Up Counter Using T Flip flop | BCD Ripple counter

#digitalelectronics
#digitalsystemdesign
#counter
mod 10 ripple counter
counter using T FLIP FLOP
MOD 10 Asynchronous Up Counter
counter using t flip flop
design BCD Counter Using t flip flop

[@EasyCrafts4]

Thank you ma'am . I am from nepal. tomorrow is my digital logic exam. Thank you for this💕

[@TechnoTutorials2783]

Good luck for ur exam

[@EasyCrafts4]

@@TechnoTutorials2783 thanks ma'am 💕. I am your very old subscriber 💖

[@TechnoTutorials2783]

@@EasyCrafts4 thanku dear

[@Saritagrg4]

Mine also digital logic board exam

[@TechnoTutorials2783]

@@Saritagrg4 good luck dear

[@ranjanchandra8265]

superrrrrrrrrrrrrrrrr

[@yashrahangdale602]

Waveform concept clear

[@TechnoTutorials2783]

Good

[@lole5t]

Hello! If you have to make a synchronous mod 10 counter, can you just use the counter you have shown in the video and just change the way the CLOCK works? Or do you have to use the k-map method? Thank you and greetings from Romania!

[@TechnoTutorials2783]

U can use kmap or just directly connect outputs of high input to nand gate and outputbof nand gate as clear input for all flip flop.

[@wokepatrick]

ma'am how do we determine to when to use positive edge triggering and negative edge triggering? In this video why did you choose -ve edge triggering ?

[@TechnoTutorials2783]

U can use any triggering depends on question

[@wokepatrick]

@@TechnoTutorials2783 yes ma'am but still how do you determine which triggering to use depending on the question

[@lakshayagarwal8307]

microprocessor one shot for CS

[@gwyash1002]

👍

[@TechnoTutorials2783]

Sure

[@anxsin230]

Mam using k map i m getting the expression Qb bar+Qd bar
Is this correct approach? BCD ripple counter

[@TechnoTutorials2783]

How u got this

[@anxsin230]

@@TechnoTutorials2783 mam mod 10 ripple counter using jk flipflop, at 0-9 the output is high means 1 and at 10th clock pulse it's 0 and remaining 11-15 outputs are don't care, so using 4variable k map I m getting that Boolean expression of the output

[@andreassilali4958]

Why binary value from 1010 to 0101 please answer miss?. Because i try to MOD 11 always fould and output up to value 8.

[@TechnoTutorials2783]

I can't understand what u want to ask

[@andreassilali4958]

@@TechnoTutorials2783 why from 1010 to 0101 to flip flop?
I have job make MOD 11 ( 1011)but i don't now binary value to flipflop

[@sumithra12]

@@andreassilali4958 here Qd is the least significant bit and Qa is the most significant bit so we need to write 1010 from Qa to Qd

[@AyushGupta29164]

mam digital communication ke notes provide karo please

[@TechnoTutorials2783]

Abhi toh hai nahi

[@Tequila-Triceps]

mam will make a lecture how to get status of flag registers
and detailed video how to solve these type of problems
Question 26: What will be the value of accumulator after executing following instructions
MVI A, 49H
MVI C, 12H
ORA C
A. 5BH
B. 5AH
C. 4AH
D. 4BH
Question 28: Find the status of CF, SF, and AF after the following instructions are executed.
MOV AL, 35 H
ADD AL, 0CE H
A. CF = 0, SF = 1, AF = 1
B. CF = 1, SF = 1, AF = 1
C. CF = 1, SF = 0, AF = 1
D. CF = 1, SF = 0, AF = 0
Question 29: Assume that CS register=3000 H and IP =2000 H. To fetch an instruction form
the memory, find the memory address from which the next instruction will be fetched.
A. 3200H
B. 32000H
C. 3200
D.32000
Question 30: Assume that, SS=3000 H, BP=0010 H, SI=0040 H Find the physical address in
following instruction.
MOV AL, [BP+SI]
A. 30050H
B. 30040H
C. 30010H
D. None of the above

[@TechnoTutorials2783]

26 A 28 B 29B 30 A

[@Tequila-Triceps]

thanks mam for ur reply
mam if possible please make a lecture🙏🙏🙏🙏🙏🙏

[@Sjjsjam]

Mam Microprocessor one short kab aayegi

[@TechnoTutorials2783]

Cse ke liye ?
If yes then I will start from next month

[@Sjjsjam]

@@TechnoTutorials2783 mam next month paper hai please 🥺 samaja karo mam please

[@TechnoTutorials2783]

@@Sjjsjam paper.se pahle ho jayega

[@Sjjsjam]

​@@TechnoTutorials2783mam put bhe hai college ma 2 July sa or I think15 July sa University paper start ho jayega

[@ArjunAg-wp7sp]

@@TechnoTutorials2783 ye mam we need them as soon as possible

[@Nani_official1908]

Draw and explain a modulo-10 up asynchronous counter using T-flip-flop ?? This question answer is this video or not???

[@TechnoTutorials2783]

Yes mod 10 and bcd counter both are same

[@Fitz_sambholic]

😮mam i have not understand😢😢😢😢

[@TechnoTutorials2783]

Tell me ur doubt

[@Fitz_sambholic]

Mam how to know which one negative and which one positive

[@dipsen1618]

​@@Fitz_sambholic See the attached clock pulse, if it has circle shaped before > this sign, it is negative clock pulse.

[@Nepali_Talents]

What if it says design mod150 counter

[@TechnoTutorials2783]

7 flip.flop required

[@TechnoTutorials2783]

Convert 149 in binary 1010101 all 1 will be connected to inputs of nand and output of nand with clear of all ff

[@gwyash1002]

microprocessor one shot for CS

[@TechnoTutorials2783]

Ok

[@Billybu]

microprocessor one shot for CS

[@TechnoTutorials2783]

Sure I will start in this week

[@YashAgarwal-on3lx]

microprocessor one shot for CS

[@TechnoTutorials2783]

Jitne.login hai sabse message kar rabe ho🤣

[@ArjunAg-wp7sp]

@@TechnoTutorials2783 thank you mam, can't believe you replied all of them :)