He did mate all the way through and knocked them in to the ground below about 3ft, can’t fault you mate we are all still learning it never ends, good look with the build and hope this video helps mate thank you for watching 👌👍
Only time will tell, it I can see it lasting a very long time, when it goes off it stretches just like a pond liner, I will try and show on one of my next few videos coming up and cheers mate 👌👍
Stumbled across this when I was searching for liquids liners. Be interested to know if it is suitable for use on concrete or block work? Be skimming it first for a smooth finish,so would be well interested to see if this would work? Great demo👍
It does stick to concrete aswell mate just as long as it free from dust and dry, I will do a demo on a block in the next couple of videos, and thanks mate appreciate it 👌👍
A lot of work. What is the cost compared to a preformed liner? Look forward to seeing it finished. Planning on something similar but with a preformed rubber liner.
I would use osb board again mate but put it straight on as soon as it’s ready, before it gets wet with the rain again, and any of those boards will be good it sticks to almost everything 👌👍
It is £18.99 per a tube, if you buy it in bulk it’s discounted mate, works out around 0.8 a squared metre per a tube, give us a call if you need any and how many tubes will sort it out for you mate, it definitely is and can’t wait to finish the pipe work off and get it filled for him, 👌👍
It can be ordered in metal drums but goes off to quick once opened and if left open, but if there is demand for it for bigger orders there will be in the near future 100% mate and will be a saving 👍
Not yet but if there is a lot of interest in people wanting it in Tins I’m sure they will be, but if you leave it open for to long it will start going off, that’s why it’s in tubes at the moment and easy to apply on the walls also, hope that helps cheers mate 👌👍
That's interesting will it work on a brick-built pond? and what is the cost I looked at the MS300 on eBay and it was £13,99 a tube but £9.99 for p7p not paying that, I have a cumtser that has a leak in her pond and this may do the job but I would need a price. Thanks, Allam
It definitely sticks to brick as long as you clean it make sure you get all the algae and slime off, then there will be no problem sticking to it mate, I’ve got it on my site I think the postage is around £3 if you want more than 1 give us a call and will sort the postage out for you 👌👍
@@Dannyskoichannel Ok cool thanks for the reply can you post your website link so I can have a look at the cost and see if my customer is happy with it, Thanks
Could be a total game changer
Thanks for sharing 👍🏼
Definitely mate, appreciate it thank you 👌👍
Great instructional video Danny, looks like a cracking product, can’t wait to give it a go😊👍
Cheers Phil appreciate mate 👌it certainly is it gets easier to apply once you get into it 👌👍
Great video Dan, the liquid liner looks the part.
Gary's hoovering skills with Henry 👌
Cheers Dan appreciate it, I will let Gary know on Monday give him the good feedback 🤣👍
Well done good job something else to consider for future use 👍👍😎
Cheers Peter it definitely is mate 100% 👌👍
Great work, very interesting product 👌
Cheers Andy it certainly is mate 💯👌👍
Looking great buddy good video looks a great finish
All the best Jiffster 👍🏼👍🏼
Cheers appreciate jiffster 👌👍
nice video keep them coming
Cheers Kev appreciate it mate thank you 👌👍
Good Job Danny. Can't wait to see how it holds up. Looks a good little build 👍
Cheers mate appreciate it, can’t wait myself big fill next week 👌👍
Nice work Danny, keep us updated on how it performs mate…. 👍🏼
Cheers Andy appreciate it, 100% mate going back in the next couple of days to put the window in 👌👍
Great video Danny. Thinking of using this for my grow on and quarantine. Looking forward to seeing the results 👍
Cheers mate appreciate it, it will be the big fill this week see how we go, it will be perfect for grow on tanks 100% 👌👍
Looking good
Cheers Daz mate 👌👍
He drilled through the wood I take it and I’m wanna start building my own pond next year so trying to get as much knowledge in as I can
He did mate all the way through and knocked them in to the ground below about 3ft, can’t fault you mate we are all still learning it never ends, good look with the build and hope this video helps mate thank you for watching 👌👍
@@Dannyskoichannel I’ve subbed as I think u be great help cheers all the best
Nice job mate 👍🏻
Cheers Cashy it’s getting there now just got to finish the pipe work off now then ready for the big fill mate 👌👍
Wow, could revolutionise pond building. Wonder what the long term properties are? Very interesting 🎏
Only time will tell, it I can see it lasting a very long time, when it goes off it stretches just like a pond liner, I will try and show on one of my next few videos coming up and cheers mate 👌👍
interesting mate. be great to see how this performs .
Cheers Dan, definitely mate just need to find time to finish the pipe work and filters off, hopefully it will be the big fill next weekend 👌👍
I just wonder if the liquid pond liner side will still hold when the other side (without pond liner) got soak in water and expand.
Stumbled across this when I was searching for liquids liners. Be interested to know if it is suitable for use on concrete or block work? Be skimming it first for a smooth finish,so would be well interested to see if this would work? Great demo👍
It does stick to concrete aswell mate just as long as it free from dust and dry, I will do a demo on a block in the next couple of videos, and thanks mate appreciate it 👌👍
Very interesting love to see if this works but the cost is comparable to a box liner
Cheers mate, will work out the cost on the next video mate 👌👍
A lot of work. What is the cost compared to a preformed liner? Look forward to seeing it finished. Planning on something similar but with a preformed rubber liner.
Not worked out the total cost yet will let you know within the next couple of uploads, good luck with the build mate 👌👍
Could be a game changer Danny 👍🏼. Would this be easy enough for the average DIYer?
It certainly can Pete 👌 and 100% mate once you do 1 wall it gets easier as you go along 👍
Hi can u remember how much the ms600 was
I sell it at 18.99 a tube mate 👍
Would you use osb again or marine ply or straight onto insulation boards smoother surface
I would use osb board again mate but put it straight on as soon as it’s ready, before it gets wet with the rain again, and any of those boards will be good it sticks to almost everything 👌👍
Any idea on cost per m on the tubes ? I'm just starting my build in next couple of weeks .look a cracking idea
It is £18.99 per a tube, if you buy it in bulk it’s discounted mate, works out around 0.8 a squared metre per a tube, give us a call if you need any and how many tubes will sort it out for you mate, it definitely is and can’t wait to finish the pipe work off and get it filled for him, 👌👍
@@Dannyskoichannel brilliant will see what it works out once get started 👍👍
Not a problem mate 👌👍
How many tube did you used mate ?
26 in total mate 👌👍
I'd like to see it full of water.
I can’t wait to see it full of water myself mate hopefully get the pipe work done this week then the big fill 👍
If this eventually proves longevity it will do fibreglass guys out of a job and hopefully much cheaper what do you think Danny.
Hopefully John only time will tell mate, I will do a price comparison within the next couple of videos 👌👍
What are the internal dimensions of the pond please pal
I’m sure it was just under 5 metres long 1.4 metres by 1 metre deep around 16 -17 square metres allowing for the window mate
I wonder if it would be better if they supplied it in buckets or drums, must have a cost saving as well?
It can be ordered in metal drums but goes off to quick once opened and if left open, but if there is demand for it for bigger orders there will be in the near future 100% mate and will be a saving 👍
Is the product more cost effective than grp?
Not worked it out yet David I will have a work out against other products and say in within the next couple of videos 👌👍
Its different i will say.
Does it come in a tin ??
Not yet but if there is a lot of interest in people wanting it in Tins I’m sure they will be, but if you leave it open for to long it will start going off, that’s why it’s in tubes at the moment and easy to apply on the walls also, hope that helps cheers mate 👌👍
Can I get it in the United States?
Hi yes it will be coming to the United States on the next shipment very soon 👍
That's interesting will it work on a brick-built pond? and what is the cost I looked at the MS300 on eBay and it was £13,99 a tube but £9.99 for p7p not paying that, I have a cumtser that has a leak in her pond and this may do the job but I would need a price. Thanks, Allam
It definitely sticks to brick as long as you clean it make sure you get all the algae and slime off, then there will be no problem sticking to it mate, I’ve got it on my site I think the postage is around £3 if you want more than 1 give us a call and will sort the postage out for you 👌👍
@@Dannyskoichannel Ok cool thanks for the reply can you post your website link so I can have a look at the cost and see if my customer is happy with it, Thanks
@goldfishforyou. No problem mate it’s
www.dannyskoiandaquatics.co.uk
👌👍
@@Dannyskoichannel I was just about to order 2 tubes but the p&p is £7,90 that can't be right?
All sorted mate no idea why it’s doing that cheers for the order be sent out tomorrow 👌👍
Nice Danny lad will watch with interest 💯🧁👍👍👍
Cheers vince 🧁💯mate 👌👍