UPR Catch Can 2012-18 Jeep Wrangler JK 3.6L

Поделиться
HTML-код
  • Опубликовано: 10 ноя 2024

Комментарии • 17

  • @wvjeepguy8178
    @wvjeepguy8178 10 месяцев назад

    Ordered mine today from Amazon.

  • @vsvpdom
    @vsvpdom 2 года назад

    Has there been a change in the diffuser design of the catch can? I ordered off your website for my 17 Jk and the catch can I received does not have the same diffuser as pictured in the beginning of the video, instead I have a single stage flat disc with 7 holes in the center.

    • @uprproducts
      @uprproducts  2 года назад

      Yes, we have improved the design with a new patent-pending a three-stage diffuser system. This diffuser system improves coalescing and will capture more oil and increase overall performance even more. This has allowed us to increase oil capacity and air volume as well. UPR

  • @danialphaomega
    @danialphaomega 5 лет назад +2

    I have tried different hoses like silicone, heater hose and even PVC but when driving in hot conditions and the added heat from the engine ALL hoses collapse under vacuum. There is hard abs or steel braided hose but they are too big and cannot fit in some areas.

    • @HunnaV
      @HunnaV Год назад

      This happened to me, have you found a better solution yet?

    • @wvjeepguy8178
      @wvjeepguy8178 10 месяцев назад

      @@HunnaV Have to use a spring in the hose if it isn't some sort of hard line.

  • @oscarlebron4678
    @oscarlebron4678 3 года назад

    I understood the complete installation process, but my only concern with this video is nothing was mentioned in what size hoses was used. Was it a 3/8” or a 5/8” hose. And where would I buy these hoses and connectors?

    • @uprproducts
      @uprproducts  3 года назад

      UPRproducts.com sells the complete catch can system, Also, fittings, hoses, and full drain line kits are available as well. 561-588-6630 UPR Sales

  • @jorgehercules8385
    @jorgehercules8385 3 года назад

    do you have a video on how to replace the pcv valve on this engine?

  • @jeepjeffy04
    @jeepjeffy04 5 лет назад +1

    Does this have the hole in the bottom to be used with the drain line kit?

  • @XxTournaquetxX
    @XxTournaquetxX 4 года назад +2

    The 3.6L Pentastar isn't direct injection, therefore a catch can isn't necessary. The gasoline cleans our valves, just be sure to use good gasoline like Chevron, Shell, etc.

    • @joshcarlson3960
      @joshcarlson3960 4 года назад +4

      Direct injection or not, there are multiple reasons to use one. Saying it's not necessary to use one solely because it is not direct injection is not accurate.

    • @StephenRivers
      @StephenRivers 4 года назад

      Yeah without one often times the air filter gets drenched with oil... The pcv system isn't up to snuff. Even after replacing with brand new not much change was noted.

    • @cosmobalderrama4419
      @cosmobalderrama4419 4 года назад

      @@StephenRivers hey man im running into that issue. Air box and filter filled with oil, already replaced PCV valve and it helped somewhat but still bad, have to add a quart of oil every 700 miles or so. Have you seen any solution to this? ive been looking at forums but no luck so far.

    • @StephenRivers
      @StephenRivers 4 года назад

      @@cosmobalderrama4419 a catch can is the only one i know of. Jeep really should fix it for good under warranty but i don't know that they're capable

  • @pauljordan756
    @pauljordan756 4 года назад

    Do you still run a PCV valve with the catch can?

    • @wvjeepguy8178
      @wvjeepguy8178 10 месяцев назад

      yes, the hose comes off of the pcv valve to the catch can