Universal X86 Tuning Utility: amdaputuningutility.com/ People, the software has some little bugs when you activate/deactivate the checkboxes, but that's about it, overall? Awesome!
We in Ukraine now have blackouts 2/7: 2 hours with electricity and 7 without. So I use this utility not to overclock but to underclock my laptop. With 9W allocated to AMD APU instead of 35W, it can game for 3-4 hours from laptop battery instead of 45 minutes, although not graphically demanding games are what I used. Still, amazing tool. And laptop with 9W does not goes too hot even during this 38C summer heat
OMG! A curve optimizer feature! I will never have to go into the BIOS again to fix the reboots resulting from my lack of knowledge when it comes to curve optimizing, hahaha! 🙌
I love this tool! On my R5 5500U, I feel a significant improvement when I can exceed 25W. The only problem with the tool is if I modify the maximum GPU clock manually, something keeps forcing the clock to a minimum of 400MHz, and then I need to adjust the minimum clock to close to the maximum, but the PC's performance is poor this way.
Are you referring to when increasing the iGPU clock, the CPU clock lowers? If so, the extra power sent to the iGPU could be reducing the power to the CPU.
Interesting, they added a lot of stuff since last time I tried it and "high" CPU utilization is fixed. This might be easy to use replacement for powershell script for vega iGPs for setting minVCN clock to avoid VP9 decoder bug (depending if it is reliable to reapply setting after sleep etc).
This is cool on paper, but hot in practice. With temps going over 40C outside in the worst days, the last thing I wanna do is add +60W heat generation to my room. For those who want to delay their PC upgrades, and you need the FPS, go ahead, it may save the day for you.
Universal x86 is much safer to configure than configuring in BIOS settings. But I hope that It can set the PPT limit lower than 40W. Ryzen master cannot set the PPT limit below 40W, but I can set 24W in the BIOS directly.
The vega 8 can be pushed quite far until the vrm's overheat, you need a good cooler and you can run baldurs gate 3 20-30 fps at steam deck settings/res (800p/720p low + ultra fsr)
UXTU is best for limiting power bit by bit for better battery life, or quiet mode. For example my machine uses dgpu+cpu=45W is standard when unplugged. I can drop it to 30W while using dgpu at low/medium settings and get close to 3 hours battery life. 20W is possible using igpu but will bog some games as it has older vega 8 680M 780M or 880M/890M get much better battery life and use about 15W and disable the dgpu. (For my laptops ryzen 5000 series it is best to just adjust 'slow' limit for the combined dgpu+apu smartshift limit to control apu or apu+dgpu combined power limit)
This is promising tool, its my first time using it but I'm most likely one of the few ones (especially looking at the tool's Discord help section) who aren't lucky after updating to the beta 3 since after that the tool just refuse to work even with a clean uninstall and install of the Stable release (v2.5.5) where the bug is Premade Presets becomes blank and when launching the Utility the CPU locks to 0.49GHz until I restart my PC then it reset back to default.
I used this after it dethroned ryzen controller . I was essentially undercrapping a laptop 5600h for a few years so i got a ptm 7950 and forgot these s/w existed. There were many options to undervolt and keep things cool but idk about the state of x86 utility back then. It was either more beta or i only played with adaptive presets . It looks handy right now , and i wish i had it when i was tuning my desktop 5600.
Ficou espetacular no meu Acer nitro5 👍👌 Obrigado pelo vídeo 🙏🇵🇹 Na torre não testei porque sinceramente não tenho necessidade para já 😅. Já no Laptop ficou bom demais.
Put -20 on all cores with CO , activate XMP and you are done. If you want to get everything out of it then test manually for CO with every single core , also follow a guide to manually tune your RAM.
Only the 1650 v3, 1660 v3 and 1680 v3 are unlocked. Everything else cannot be changed. You *may* get unlucky and be able to undervolt - but usually for the 26xx v3 you change the undervolting in the driver you use to unlock all core turbo boost.
@@b0ne91 Correct. That's the same with or without the tuning utility :p Ps. "Getting lucky" with an undervolt is not correct. All v3's can be undervolted, that's how turbo boost unlock works. The CPU is tdp *hard* limited @the CPU. So to turbo boost unlock, all xeons require undervolting.
Great video! I recently got a 5800X3D + 6950XT combo and I'm in love with the performance but was looking to optimize the temps a little bit. Will give this software a try Also what overlay are you using for the FPS info? Afterburner?
this sounds awesome... for the people that have issues with adrenalin now have an option to install drivers only and not lose many features. question, can you set the monitor bit depth through windows? i run my neo g7 on 12 bit through adrenalin
There is this bug about starfield in all systems because I think it is to do with the game engine. When standing still, ALL the parts and pieces of the gun model vibrate ever so slightly and move and are not one coherrent piece. Its impossible to unsee
@@Damnboii134 yes i believe post 9th gen intel mobile cpus locked voltage control. You can try turning off iirc virtualisation from bios and see if it unlocks cpu or gpu voltage control...
Great video as always, do you have a video for ram overclock? With comparison between stock and OC. I currently have 2x8GB G.skill 3200 cl16, in pair with a 3700x and 6700xt, was thinking if I overclocked it I would get any boost in performance or stability, instead of buying a 3600mhz kit.
on my intel 1185g7 processor I can only limit the processor TDP, it's a pity that intel limits users so much. I would really like to undervolt this processor
if u changed something like the curve in the bios u will not see it in the tool, maybe its good to default bios before playing with the tools overall i guess
Can you do a video with your 12600k and a good GPU like in this video the 4070 ti super? It would be very interesting to see how far this CPU can go because I think it's now on of the best bang for the buck CPUs from lga 1700
@@h1ghken so what's the difference if you play on a laptop? You have the same softwares of a desktop pc btw, i've played on a laptop for 15 years before switching to a desktop
My ryzen 5600 did NOT like this software. I just launched it and set balanced performance mode and the clock speed immidietly dropped down below 550mhz.
@@AncientGameplays CPU is not overclocked nor anything was changed only the ram was OC'd from 3200 to 3600mt/s. Im %100 sure its not an overheating problem either because there were no throttling reported by HWinfo. Think im gonna wait till they improve the software to its stable state.
My laptop was blocked from undervolting by the manufacturer after a BIOS update. Throttlestop no longer works. It's an 8th generation Intel. Will it work with this software?
@@AncientGameplays I have one of latest version, I remember old bios (like from 2021~) works with Ryzen master, but every change just crash the system immediately
I´m a bit scared that this tool can break my pc/cpu/gpu/bios or something like that. Is it complete safe and i dont need a restart for the apply of the settings? Thanks for the great work and for the cat as well ;)
Not sure this tool would have that much of an impact on a usual desktop gaming pc. Since well wattman on amd can do most of these same things i think. Or maybe i missed something? if there was a tool, which could change the cpu clocks/voltages per game/application. That might be interesting tho. If such roundabout ways of trying to save a bit of power is even worth it.
Will you make a redo of the modded software for AMD. Or modded BIOS to allow card running beyond factory bond (With the heatsinks of the 7800XT the card usually never goes over 15% to 35% fans speed).
I didn't know where to ask this then lol I was talking to a dev mod and made an adaptation before their official update for the BRAZILIAN community to use, how can I send this mod adaptation with fsr 3.1 already available? This mod is free and available on Nexus without FSR 3.1 because I made it and it works. How can I submit this beta adaptation, say, before launch?
what CPU Curve optimizer setting & VRM current setting (A) would You recommend for 20 W , 25W and 30 W configurations ? ( Ryzen 5 3500 u default TDP 15w )
Bios settings is not better per se, you just don't need the software. Also, there are more things you can do on an easy pace here. Calling this app "extremely meh" certainly comes from a desktop user only haha
Saudações brasileiras, assim como você, também tenho um minipc com processador da AMD, porém, na versão 7840HS. Ouvi dizer que a diferença para o 7940HS é que o 7840 não permite por padrão a realização de overclock. Será que eu consigo algo? Um abraço
@@AncientGameplays maybe you could do a video on those too. i also remember there being a trick to overclock 6th gen intel but 10th and 12th gen would be great
@@AncientGameplays process lasso doesn't work on cyberpunk I am currently playing cyberpunk just finished the main story expansion is still left there is huge fps drops and stuttering on cpu intensive areas like dogtown and the hybrid cpu opt p cores priotize make it Stutter even more. I have read hundreds of reddit post or steam discussion but haven't find any proper fix sadly. Only thing that help is fsr 3 mod which made it playable. I still don't understand even my cpu is slightly slower like max to max 5 percent from the recommended cpu the way frames drops is crazy I have seen weaker cpu able to run the game much better
I downloaded the latest version of it and my premade preset arguments are gone, hence the performance remains unchanged. It seems like I need to use the older version. The more you know
@@AncientGameplays I know, but the presets appeal to me for adapting on the fly scenarios and I don't see the immediate benefits of the latest beta version, so it is what it is
my hp all in one 5500u had a tdp of 25 for 5 minutes then it dropped to 15 ryzen master was not working lockt for apu? this worked fine at 30 watts continuously and because it is an all in one max 80 degrees on 30w
@@AncientGameplays Would be cool to see these programs being used on some older parts for longevity. Still got a 3600 and might only upgrade on AMD 10k or 11k or w/e they will call it. Maybe.
Yeah this does not open for me. I use the link and then it opens another web page and then tells me 7.0V is dead and to install the 8.0V and when its installed it didn't create a shortcut to even open the application.....
Universal X86 Tuning Utility: amdaputuningutility.com/
People, the software has some little bugs when you activate/deactivate the checkboxes, but that's about it, overall? Awesome!
can you post a link to download not sure if i got the right keeps saying need dotnet 7 on windows 11
Ooh. Wonder if there's a Linux version. Yep, I've made the switch.
It also works for AMD Ryzen 9 7845HX and 9 7945HX Phoenix models as well!
@@AndrewSmith-vt5cx I'm having the same problem.
should I install RID driver on a 7000 series GPU?
Not only a ton of useful information, we get a cat as bonus! Thanks Fabio
We get a cat as bonus, and a cat yeet as bonus bonus !
theyre gift from them though, but thank you
We in Ukraine now have blackouts 2/7: 2 hours with electricity and 7 without. So I use this utility not to overclock but to underclock my laptop. With 9W allocated to AMD APU instead of 35W, it can game for 3-4 hours from laptop battery instead of 45 minutes, although not graphically demanding games are what I used. Still, amazing tool. And laptop with 9W does not goes too hot even during this 38C summer heat
I see, that's a bummer....
Slava Ukraini. Hope things get better soon.
It sucks, man! It reminds me of blackouts in Crimea during 2015-2016 after some dudes blew up power lines.
В Одессе почти также, 3 часа есть свет, 6 нету. Взял 2 зарядные станции, каждая по 2000втч, хоть так со светом, даже на комп хватает если не играть.
Slava Ukraini! And god bless you my brother, hope everything will be over soon
OMG! A curve optimizer feature! I will never have to go into the BIOS again to fix the reboots resulting from my lack of knowledge when it comes to curve optimizing, hahaha! 🙌
My favorite youtuber. Thank you for everything. When i was unsure about whether or not to switch to an amd gpu, here is where i got most of my info.
I am glad to help!
I just installed it and opened RUclips only to find this video of yours suggested to me.
Fabio always coming in clutch with these tip videos.
The AI is ever observant!
Finally a recent video about UXTU. Been searching for a while
Thanks for doing this. I was messing around with this program a bit but now I know how to do a bit more because of you. Upvoted for the cat!
Thanks!
Bro this cat wants his own YT channel
i forgot but there are terms for monetization, smth abt subscribers view time etc
or you can go other route, such as paid streamer/ creators (sponsored account, w obv lots of rules)
Definitely going to check this out. Thanks a mill! 🎉
Sounds like exactly what I need for my work laptop. Win11 sometimes disregard Power Plans and that's really annoying. Nice tool.
Thank you for doing this. It not only helped my preference, but also my temperature.
great!
Nice tool. I am already used to manually tuning my stuff so it's no too useful to me, but I will definitely be checking it out.
Whatever you do, DON'T overclock your cat 😂😂
Cats come overclocked from factory. If you don't belive me, just open a can of tuna and see how fast it can run.
I undervolt my cat
i ate a cat once
Would be interesting to see tests of CPU performance in diffrent power limits for most popular CPU
Yesss! This work independent the MotherBoard Bios?
Thumbs up for kitty! It does look like a very capable program and free is always nice. Thanks!
I love this tool! On my R5 5500U, I feel a significant improvement when I can exceed 25W.
The only problem with the tool is if I modify the maximum GPU clock manually, something keeps forcing the clock to a minimum of 400MHz, and then I need to adjust the minimum clock to close to the maximum, but the PC's performance is poor this way.
Report the bug 💪💪
Are you referring to when increasing the iGPU clock, the CPU clock lowers? If so, the extra power sent to the iGPU could be reducing the power to the CPU.
@@tekeagle2136 Yes, is the iGPU. Thanks for this pov, I will do more tests to have sure the problem is between my keyboard and my chair.
@@wellery Oh I see, you need to raise the power limits as well, otherwise that will happen
@@AncientGameplays ahhh thanks for the tip! I will try again raising the power limits. Thanks a lot!
This is amazing!
Testing here already....thanks!!
Glad to help!
Wow this app is really nice!! Thanks for the amazing video!
Interesting, they added a lot of stuff since last time I tried it and "high" CPU utilization is fixed.
This might be easy to use replacement for powershell script for vega iGPs for setting minVCN clock to avoid VP9 decoder bug (depending if it is reliable to reapply setting after sleep etc).
This is cool on paper, but hot in practice. With temps going over 40C outside in the worst days, the last thing I wanna do is add +60W heat generation to my room. For those who want to delay their PC upgrades, and you need the FPS, go ahead, it may save the day for you.
Universal x86 is much safer to configure than configuring in BIOS settings. But I hope that It can set the PPT limit lower than 40W.
Ryzen master cannot set the PPT limit below 40W, but I can set 24W in the BIOS directly.
The vega 8 can be pushed quite far until the vrm's overheat, you need a good cooler and you can run baldurs gate 3 20-30 fps at steam deck settings/res (800p/720p low + ultra fsr)
Need this for Linux.
Wow great software, it opens better paths also for non super enthusiasts, having all those options in reach
UXTU is best for limiting power bit by bit for better battery life, or quiet mode. For example my machine uses dgpu+cpu=45W is standard when unplugged. I can drop it to 30W while using dgpu at low/medium settings and get close to 3 hours battery life. 20W is possible using igpu but will bog some games as it has older vega 8 680M 780M or 880M/890M get much better battery life and use about 15W and disable the dgpu. (For my laptops ryzen 5000 series it is best to just adjust 'slow' limit for the combined dgpu+apu smartshift limit to control apu or apu+dgpu combined power limit)
This is promising tool, its my first time using it but I'm most likely one of the few ones (especially looking at the tool's Discord help section) who aren't lucky after updating to the beta 3 since after that the tool just refuse to work even with a clean uninstall and install of the Stable release (v2.5.5) where the bug is Premade Presets becomes blank and when launching the Utility the CPU locks to 0.49GHz until I restart my PC then it reset back to default.
A great piece of overclocking / undervolting software and a cute 🥰cat 🐈as well ….. what more coul$ we ask for
I used this after it dethroned ryzen controller . I was essentially undercrapping a laptop 5600h for a few years so i got a ptm 7950 and forgot these s/w existed.
There were many options to undervolt and keep things cool but idk about the state of x86 utility back then.
It was either more beta or i only played with adaptive presets .
It looks handy right now , and i wish i had it when i was tuning my desktop 5600.
Great video of this great tuning program! Thanks a lot!
Thanks for all you do and tell the cat hi!
Ficou espetacular no meu Acer nitro5 👍👌 Obrigado pelo vídeo 🙏🇵🇹 Na torre não testei porque sinceramente não tenho necessidade para já 😅. Já no Laptop ficou bom demais.
Ainda bem!
Keep up the great videos.
Wish this tool could do memory tuning too. It works great on MiniPC's
Yes, that's what it lacks!
Not a cat in the bag vid haha
Great vid👌🏼 do you have any advice on tuning/curve optimization on a 5800X3D?
Just use CO and see what results you get
Put -20 on all cores with CO , activate XMP and you are done. If you want to get everything out of it then test manually for CO with every single core , also follow a guide to manually tune your RAM.
Gonna give it a go in Xeon E5 v3's.... Wish me luck!
Only the 1650 v3, 1660 v3 and 1680 v3 are unlocked. Everything else cannot be changed. You *may* get unlucky and be able to undervolt - but usually for the 26xx v3 you change the undervolting in the driver you use to unlock all core turbo boost.
@@b0ne91 Correct. That's the same with or without the tuning utility :p
Ps. "Getting lucky" with an undervolt is not correct. All v3's can be undervolted, that's how turbo boost unlock works. The CPU is tdp *hard* limited @the CPU. So to turbo boost unlock, all xeons require undervolting.
Great video! I recently got a 5800X3D + 6950XT combo and I'm in love with the performance but was looking to optimize the temps a little bit. Will give this software a try
Also what overlay are you using for the FPS info? Afterburner?
You can always undervolt or limit the power draw. And yes, afterburner
this sounds awesome... for the people that have issues with adrenalin now have an option to install drivers only and not lose many features. question, can you set the monitor bit depth through windows? i run my neo g7 on 12 bit through adrenalin
There is this bug about starfield in all systems because I think it is to do with the game engine. When standing still, ALL the parts and pieces of the gun model vibrate ever so slightly and move and are not one coherrent piece. Its impossible to unsee
Well I have a i5 11260h rtx 3050 laptop and there's only two options available
1:- cpu power tuning
2:- nividia gpu tuning
This sucks😃
Premade presets also aren't present 😮
@@Damnboii134 yes i believe post 9th gen intel mobile cpus locked voltage control. You can try turning off iirc virtualisation from bios and see if it unlocks cpu or gpu voltage control...
That's because sadly none of those are unlocked, BUT, you can raise your CPU and GPU power limit, that alone will allow better performance
Sometimes Undervolt is King
Most of the time tbh.
Great video as always, do you have a video for ram overclock? With comparison between stock and OC.
I currently have 2x8GB G.skill 3200 cl16, in pair with a 3700x and 6700xt, was thinking if I overclocked it I would get any boost in performance or stability, instead of buying a 3600mhz kit.
on my intel 1185g7 processor I can only limit the processor TDP, it's a pity that intel limits users so much. I would really like to undervolt this processor
Im a simple man. I see a cat, i smile :)
if u changed something like the curve in the bios u will not see it in the tool, maybe its good to default bios before playing with the tools overall i guess
Can you do a video with your 12600k and a good GPU like in this video the 4070 ti super? It would be very interesting to see how far this CPU can go because I think it's now on of the best bang for the buck CPUs from lga 1700
So it's basically a Ryzen Master+Adrenaline in a single package, nothing special but it can be handy for a new user
Not just that intel and nvidia
Not with all features, but a mix, it can also fiddle with Intel CPUs and NVIDIA GPUs as shown
"nothing special" lol. Tell me you dont game on a laptop without tell me...
@@h1ghken so what's the difference if you play on a laptop? You have the same softwares of a desktop pc btw, i've played on a laptop for 15 years before switching to a desktop
My ryzen 5600 did NOT like this software. I just launched it and set balanced performance mode and the clock speed immidietly dropped down below 550mhz.
maybe a bug? Also, you need to use the software with the CPU at stock in the BIOS settings of course
@@AncientGameplays CPU is not overclocked nor anything was changed only the ram was OC'd from 3200 to 3600mt/s. Im %100 sure its not an overheating problem either because there were no throttling reported by HWinfo. Think im gonna wait till they improve the software to its stable state.
This sounds great
Thanks
hm hzd finally, just like crysis it was also the best stream i had
Does it work on motherboards that do not support overclocking like A620 mobos?
Great video by the way. Thank you.
A620 can overclock RAM, and even in those, this software might allow some tweaking
Great video ❤
Always trying to bring info you guys want :D
So its MSI Afterburner and Throttlestop. Truly revolutionary.
yup nothing new besides i trust my mobo bios a lot more then some software tuning utility.
its less useful than throttlestop...
QQ
Is someone touching you in the wrong placa son?
@@AncientGameplays very mature, prime example of an amd fanboy
What if we have used this application, then want to return the TDP to default again, bro?
My laptop was blocked from undervolting by the manufacturer after a BIOS update. Throttlestop no longer works. It's an 8th generation Intel. Will it work with this software?
Try it
Please work on my razer laptop… can’t wait to get home and try it. CPU hits 85c just basic gaming on Fallout 76 on medium graphics settings.
Man, I'm GenX, and I have to welcome you to 2020?
You do you
Thank you! ❤
Will it work on cheapest motherboards, something like with an A320? I have Ryzen 5600 + Asus A320m-k :D
UPD: I tried and no, it didn't work :c
Some of those boards have bios updates to make it work
@@AncientGameplays I have one of latest version, I remember old bios (like from 2021~) works with Ryzen master, but every change just crash the system immediately
It's pretty funny how I literally downloaded uxtu yesterday and now you made a video about it 🤣
destiny
lol i was really clueless, and prob based on previous quest thats abit similar and requires some climb action
though if its abt high ground skyrim did best, and witcher
love your vids
Thank you!
I´m a bit scared that this tool can break my pc/cpu/gpu/bios or something like that. Is it complete safe and i dont need a restart for the apply of the settings? Thanks for the great work and for the cat as well ;)
software will hardly ever break anything nowadays, don't worry
Not sure this tool would have that much of an impact on a usual desktop gaming pc. Since well wattman on amd can do most of these same things i think. Or maybe i missed something?
if there was a tool, which could change the cpu clocks/voltages per game/application. That might be interesting tho.
If such roundabout ways of trying to save a bit of power is even worth it.
irony is this works on my z8 g4 workstation to lift the tdp
I know 🤌🤌
I love your cat ❤
Ancient Jesus Gameplays
Will you make a redo of the modded software for AMD. Or modded BIOS to allow card running beyond factory bond (With the heatsinks of the 7800XT the card usually never goes over 15% to 35% fans speed).
I didn't know where to ask this then lol
I was talking to a dev mod and made an adaptation before their official update for the BRAZILIAN community to use, how can I send this mod adaptation with fsr 3.1 already available? This mod is free and available on Nexus without FSR 3.1 because I made it and it works. How can I submit this beta adaptation, say, before launch?
what CPU Curve optimizer setting & VRM current setting (A) would You recommend for 20 W , 25W and 30 W configurations ? ( Ryzen 5 3500 u default TDP 15w )
Hey brother, would this only really be useful for handhelds and laptops?
Good video.
my 5800x3d was already tuned both on windows and on linux so this isn't that useful to me. but cool software, i guess.
Erm, that looks a lot like the AMD Vega logo 😬😁
Yup
extremely meh there not even GPU tuning on 6900XT only Cpu tuning and i use bios setting better than software
Bios settings is not better per se, you just don't need the software. Also, there are more things you can do on an easy pace here.
Calling this app "extremely meh" certainly comes from a desktop user only haha
I tested it on my Thinkpad T16 with Ryzen 6800U, but unfortunately my laptop quickly overwrites the settings I have set :(
That's odd... unless temps are getting too high
@@AncientGameplaysThe temperatures are around 80°C so should be ok.
I think Lenovo has somehow blocked this tool from working properly
is it possible to see and linux with the games (how they works etc) and have informations or solutions :D even one 5% from the videos u making ?
Uma app filha desta tool e da tool do "pato" era a cereja em cima do bolo 👌
Would u mind comparing this vs stock software like amd. if performance is any different
Saudações brasileiras, assim como você, também tenho um minipc com processador da AMD, porém, na versão 7840HS. Ouvi dizer que a diferença para o 7940HS é que o 7840 não permite por padrão a realização de overclock. Será que eu consigo algo?
Um abraço
Tente, não custa nada
thought this will only work on Laptops 😮
i was expecting something for locked sku s ... :(
It does work on "locked" SKUs to a certain extend
@@AncientGameplays maybe you could do a video on those too. i also remember there being a trick to overclock 6th gen intel but 10th and 12th gen would be great
i will try on my dell 7567 =)
Fabio can you make a video how to disable e cores in a laptop i have 12650h and i wanna disable e core but bios is locked in laptop 😢
Only few option are there in the bios
Humm, I don't think you can do that besides using some software like Process Lasso, to make windows avoid those eCORES
@@AncientGameplays process lasso doesn't work on cyberpunk I am currently playing cyberpunk just finished the main story expansion is still left there is huge fps drops and stuttering on cpu intensive areas like dogtown and the hybrid cpu opt p cores priotize make it Stutter even more. I have read hundreds of reddit post or steam discussion but haven't find any proper fix sadly. Only thing that help is fsr 3 mod which made it playable. I still don't understand even my cpu is slightly slower like max to max 5 percent from the recommended cpu the way frames drops is crazy I have seen weaker cpu able to run the game much better
I downloaded the latest version of it and my premade preset arguments are gone, hence the performance remains unchanged. It seems like I need to use the older version. The more you know
Maybe it bugged. Also, you can tweak it yourself manually
@@AncientGameplays I know, but the presets appeal to me for adapting on the fly scenarios and I don't see the immediate benefits of the latest beta version, so it is what it is
@@chacharealsmooth941 clean install the new version, might work
but can it overclock my coffee machine?
Yes, it can
Any options to configure fan curve for your GPU ? Need to change my fan speed to a lower value than the one amd has on 7900XT which is 23%
I believe not. You can mod the bios if you want to
Ancient Catplays Soon
when adjusting max power on Intel CPUs, will it still boost or just run at max stable frequency for that power setting?
55 watt = 95 fps and 72 C temperature
95watt = 102 fps and 92 C temperature
Naah im good
That's max OC and on a mini PC
thanks
Wonder if this will work on Handhelds like the ROG ally.
It does
I already have my 5700x on -30 offset, would this help?
Idk why mine doesn't work, i have 3500u amd and change the adp but the watt usage doesn't change
i suppose it still wont help overclocking a locked cpu like i5-9400f right?
Im pretty sure you will have to disable some power limits in BIOS if possible..
I don't think so. It might allow you higher power limits though
can I undervolt my ryzen 5 7535hs laptop with this tool? or is it only for unlocked cpu?
I believe you can
How about i5 6th gen? (Older CPU) this cpu can overclock using this software?
Guess this wont be a good idea to try and overclock 5800x3d lol
my hp all in one 5500u had a tdp of 25 for 5 minutes then it dropped to 15 ryzen master was not working lockt for apu? this worked fine at 30 watts continuously and because it is an all in one max 80 degrees on 30w
Great to hear!
Does it work with AMD 3000 CPUs too or is it limited to 5000 and up like some other programs?
it does I believe
@@AncientGameplays Would be cool to see these programs being used on some older parts for longevity. Still got a 3600 and might only upgrade on AMD 10k or 11k or w/e they will call it. Maybe.
Hello,
In the premade presets i only need to click on the preset i want and its Immediately take effect?
Thanks!
Yes
Yeah this does not open for me. I use the link and then it opens another web page and then tells me 7.0V is dead and to install the 8.0V and when its installed it didn't create a shortcut to even open the application.....