Probably the only video on youtube showing the front end of an AEL engine A6 in bits. Thanks for the video, it helped me put mine back together after being stood for a long time!
Very good video congrats I had two of this in my time, not a reliable engine and parts in general, every engine if looking after will last, the 2.5 its too complicated and difficult to get parts in our days,but i liked the car when I had it
Great Job...👈🏽👏🏽👏🏽👏🏽..i have a Brother of yours😎 Same engine..same gearbox...the only difference its sedan and its not QUATTRO ..The rest it's A COPY. I Have it right now on my garage here in Spain,fixing a problem with the immo. On the Engine ECU..Here in Spain. Its 591K!!! on the dash👈🏽👈🏽...this engine is a legend .. They Bought it brand new in '94...in Madrid.. Thanks Audi for make this piece of German quality... Or as they say... Deutsche Qualität 😎 His serial number is below the 4000 first engines they did. A real SURVIVOR👈🏽 Same block Never have to lift the cilynder head NEVER ...😱🔝😱🔝. 👈🏽✌🏽 Unfortunately in one year possibly the car will go to the crapyard..because of the fucking emissions restrictions on the city.. Everything is come to an end 😢 That's life... Greetings from Spain. +1 subscriber..NICE VIDEO 👈🏽💪🏽
Thanks, actually - this very video was my first time opening an engine and learning it. Its just edited that way - so it looks like i knew what i was doing 😀
Hey braļuka! I’m from Latvia and I think I need to replace headgasket, because oil get in coolant and I’m a little scared to open engine and replace it myself. It’s very hard to do? Or you have any recommendations for my first time open engine?
I drove the car after the head gasket job for about another 100.000km and then decided to move on. But I have never modified the boost tho, since I used this car sometimes for long abroad trips and I needed it to be reliable. But good luck if you are going to - these are awesome engines
@@carweekend7818 do you know how to modify the boost without getting a tune . I have a c4 ael with 180 hp and 440 nm and its still pretty reliable. Awesome video
Increasing the spring tension will persuade the wastegate valve to open later so that it creates more pressure , therefore more boost, i have done this to mine, and there is a difference
@@carweekend7818Hello friend, can I ask, how did you removed in 2:50 of video the right side screw of water pump without removing the viscous fan? I used any possible tools and can't get there :)) Thank you!
Probably the only video on youtube showing the front end of an AEL engine A6 in bits. Thanks for the video, it helped me put mine back together after being stood for a long time!
Thanks very much for this, very helpful.
Best car I've ever had. Such a comfortable ride with such a smooth and beautiful sounding engine!
Very, very nice video. Love your approach - learn on the go, somewhat similar to mine, hehe. Best wishes and kind regards from Czechia! 😀
Very good video congrats
I had two of this in my time, not a reliable engine and parts in general, every engine if looking after will last, the 2.5 its too complicated and difficult to get parts in our days,but i liked the car when I had it
how mach the engine head is clamped and how mach the cam
Great Job...👈🏽👏🏽👏🏽👏🏽..i have a Brother of yours😎
Same engine..same gearbox...the only difference its sedan and its not QUATTRO ..The rest it's A COPY.
I Have it right now on my garage here in Spain,fixing a problem with the immo. On the Engine ECU..Here in Spain.
Its 591K!!! on the dash👈🏽👈🏽...this engine is a legend ..
They Bought it brand new in '94...in Madrid..
Thanks Audi for make this piece of German quality...
Or as they say... Deutsche Qualität 😎
His serial number is below the 4000 first engines they did.
A real SURVIVOR👈🏽
Same block
Never have to lift the cilynder head NEVER ...😱🔝😱🔝.
👈🏽✌🏽
Unfortunately in one year possibly the car will go to the crapyard..because of the fucking emissions restrictions on the city..
Everything is come to an end 😢
That's life...
Greetings from Spain.
+1 subscriber..NICE VIDEO 👈🏽💪🏽
Awesome ... good work. where do you learn everything? Greetings from Germany !
Thanks, actually - this very video was my first time opening an engine and learning it. Its just edited that way - so it looks like i knew what i was doing 😀
Veryyy good video my friend.
Hey braļuka! I’m from Latvia and I think I need to replace headgasket, because oil get in coolant and I’m a little scared to open engine and replace it myself. It’s very hard to do? Or you have any recommendations for my first time open engine?
Not hard at all - just take it slowly and all will be fine - hope you had success 🚀
@@vakarisunciura88 yup, before one week I did it! Thanks your video help!
there is manual where i plain everything step by step
Do you still have the car? Good job there! How did you play with boost? Interested to hear that as I have the same engine! :)
I drove the car after the head gasket job for about another 100.000km and then decided to move on. But I have never modified the boost tho, since I used this car sometimes for long abroad trips and I needed it to be reliable. But good luck if you are going to - these are awesome engines
@@carweekend7818 do you know how to modify the boost without getting a tune . I have a c4 ael with 180 hp and 440 nm and its still pretty reliable. Awesome video
You can dismount the internal wastegate housing and add some pressure plates inside to increase the spring tension.
Increasing the spring tension will persuade the wastegate valve to open later so that it creates more pressure , therefore more boost, i have done this to mine, and there is a difference
@@carweekend7818Hello friend, can I ask, how did you removed in 2:50 of video the right side screw of water pump without removing the viscous fan?
I used any possible tools and can't get there :))
Thank you!
How many newton meter you used for crankshaft?
moment in video is 14:15
Thanks for reply)
I want see a timing, my car is so bad
Norint pakeist pagr. diržą reik visą priekį nusiardyt?
❤
Well it looks like i will take the head off of my Volvo 850 TdI after all.
susirask youtube sergej lipatov viska rasi apie c4 tdi
Lietuva juda :O ?
Klausimas... atsukai pagrindinio škyvo varžtą su milwaukee :O :O ? :D ar čia post factum tipo sukai jau :D
@@realgarage8190 Kiek atsimenu tai atlaisvinau su breakerbaru, o paskui jau su drele išsukau😉
Bent jau taip butu patartina daryt kad nesugadint nieko. Gali būt kad tada it tiesiogiai su smūgine drele išsukau ir man pasiseke😁
@@vakarisunciura88 Na sakau, :D nes su milwaukee taip neatsuksi uzsistaporines :D
🫡🫡🫡🫡🫡🫡🫡🫡🫡🫡
Путен рулит)
Что это за говно, а не мотор?