Nice to see you in little Paxton again used to price there until a year ago moved up to Lincoln very good place for bashing with the skatepark dirt ramps and river
Thanks for the great video Kev and for pushing Thrasher to the absolute bashing limit and beyond; seeing our product pushed to damage and exposing week points, helps me improve the design. I am already on CAD designing a new reverse bucket linkage that will stand up to the next Talbot test! I will get an early version shipped off to you soon.
Always great support from Streamline!! I've printed a new servo bracket for the steering breaking on my one which will keep me going after I hit the wall trying to rescue Kev! I actually think I might have broken it just before that with an impact on the stern just before I sent it that way, hence not being able to aim though that gap in the weir to get to Kev's Thrasher. I think a bilge pump and the trim tabs set will be on the cards for my v3, and maybe a wear ring kit as it's done a good few hours now. Amazing boats!! Awesome design and take such a beating compared to any other boat you can buy.
PROPS to ANDY ,being someone that is firmilliar with both the Wonder of 3D Printing and the ease of distruction in the world of RCs you did a bangup job of it 😉
Those 3d printed boats are nice and look absolutely epic! Nice printjob there by Andy. Well done and nice video. Although Im a "car guy" I really appreciate your boat videos.
Hey Kevin if your worried about slipping on slick slimy rocks put some socks over your boots they will give you a lot more traction it's kinda like foam tires for your feet
11:08 "put the reverse bucket down and do an emergency stop" not at that speed but I used to do that in my 30' boat.....pull a captain ron while coming in to dock...head straight for the space and just as your bow is about to hit the concrete wall, spin the helm all the way to the right, full reverse, and the boat twists into the spot pretty as you please. I did that in front of a crowded bar patio, then got off, flipped the lines around the mooring bollard. A couple of hotties in the bar leaning over the rail "you've done that before have you"? Yes ma'am once or thrice.....:-)
@@Nordlicht05 rctestflight makes lots of rc boat hulls, most of the time its foam with fiber glass epoxied on since most 3d prints arent actually water tight and allow water to seep through slowly
Hope you love the new home on the isle! Say hello to Tiny for me and Redfin Hobby...whatever happened to Clair? Haven't seen her much as of lately...Rip, repair and repeat 😂
@@KevinTalbotTV Hey I wish I could join you in your vids cause I have a couple of rc cars and I’m currently training to fly an rc plane on a game called real flight rc simulator
awesome action. I love jet boats. I have two from horizon hobby. I did notice when you were rebuilding the impeller there was a gt40 on the bench. I love the gt40 I cant wait to see that video.
Hey Kevin, I've been a fan for a long time, my Grandma has recently passed and she always was interested in when I got a new rc car, I made her a custom Nissan Skyline and she'd always drive it around her home, thank you for making me smile when times are tough
I can recommend being careful around weirs. My next door neighbour went kayaking with his 14 year-old son, and he went over a weir, got sucked into the undertow and drowned. To death.
Can we get some Scx24 content or any mini crawler content would be cool. Maybe you could get the new Hobbywing motor and ESC combo for 1/24 and 1/18 crawlers and compare it to some others, please and thank you👍
🚗Win one of my cars raffall.com/kevin_talbot
I want à video with thé rovan 29cc rovan
I like and subscribe so can I get a Free rc car
kev what is your fav build it your self rc car kit?
Can we see the new mini maxx and a stupid fast mini maxx?
Nice to see you in little Paxton again used to price there until a year ago moved up to Lincoln very good place for bashing with the skatepark dirt ramps and river
Thanks for the great video Kev and for pushing Thrasher to the absolute bashing limit and beyond; seeing our product pushed to damage and exposing week points, helps me improve the design. I am already on CAD designing a new reverse bucket linkage that will stand up to the next Talbot test! I will get an early version shipped off to you soon.
Boom, sounds epic, constantly improving!! Cant wait for the next talbot test!!
Always great support from Streamline!! I've printed a new servo bracket for the steering breaking on my one which will keep me going after I hit the wall trying to rescue Kev! I actually think I might have broken it just before that with an impact on the stern just before I sent it that way, hence not being able to aim though that gap in the weir to get to Kev's Thrasher. I think a bilge pump and the trim tabs set will be on the cards for my v3, and maybe a wear ring kit as it's done a good few hours now. Amazing boats!! Awesome design and take such a beating compared to any other boat you can buy.
PROPS to ANDY ,being someone that is firmilliar with both the Wonder of 3D Printing and the ease of distruction in the world of RCs you did a bangup job of it 😉
Those 3d printed boats are nice and look absolutely epic! Nice printjob there by Andy. Well done and nice video. Although Im a "car guy" I really appreciate your boat videos.
Andy should sell these boats!!!! He’d make alot from it!!
Imagine how much a 3d printed boat would cost, with all of the labour.
£1k finished?
How many would you buy?
@@procatprocat9647 i would buy 2
3 mil coming soon🎉🎉
Kevin, it doesn't matter what you're doing a video about, it's always a pleasure to watch
F
Kevin "Shipwreck" Talbot a great captain who went down with the ship ...
Hey Kevin if your worried about slipping on slick slimy rocks put some socks over your boots they will give you a lot more traction it's kinda like foam tires for your feet
Hey, thank you for getting me interested with Rc cars. I got my Rc car for Redcat and it’s the gen 7 sport
KEVIN "THE DESTROYER" TALBOT !!
This is really cool, and it's good to test weaknesses in any product to improve the product for buyers or just for yourself really👍👍
11:08 "put the reverse bucket down and do an emergency stop" not at that speed but I used to do that in my 30' boat.....pull a captain ron while coming in to dock...head straight for the space and just as your bow is about to hit the concrete wall, spin the helm all the way to the right, full reverse, and the boat twists into the spot pretty as you please.
I did that in front of a crowded bar patio, then got off, flipped the lines around the mooring bollard. A couple of hotties in the bar leaning over the rail "you've done that before have you"?
Yes ma'am once or thrice.....:-)
Nice
Those thrasher boats are wild.
Grab a redcat lowrider
They are pretty fun, also great to tow on a trailer behind a rig !!
You gotta get a 3D printer. There is quite a steep learning curve, but it is one of the most powerful tools in RC hobby. You won't regret that.
I've just got one, just gotta learn how to use it
Waffle waffle waffle get it done Kev!
@@KevinTalbotTVHope you visit Southwestern Ontario Canada 🇨🇦! We would really enjoy your company!
I have a printer but want to build the hull by hand out of hardfoam. If I have good templates it is infinitely faster than printing.
@@Nordlicht05 rctestflight makes lots of rc boat hulls, most of the time its foam with fiber glass epoxied on since most 3d prints arent actually water tight and allow water to seep through slowly
Yeah boy
yo 8s steve in the house!!
I like every video you make!.. shame there isn't a ❤ button 😜.. all the best
A line with some hooks and a float to throw and rescue boats.
Jet boats are so cool, rc, real, big or small, watched quite a few videos on them, really enjoy watching cleetus mcfarland take his up river.
Love it when Rob joins in for some fun, he ads extra atmosphere!
I think its better if you add tiny weights at the back of the boat so it’s does not flop around and can reach max speed
Kev those 3 D printed boats are epic
I like the boat content👍💯🎯
Kev,
When you'll make your primal game over monster truck brushless??
I can't wait to see that video ❤
amazing!!! nice job Andy
Hope you love the new home on the isle! Say hello to Tiny for me and Redfin Hobby...whatever happened to Clair? Haven't seen her much as of lately...Rip, repair and repeat 😂
I’m the one who said “Your my favourite RUclipsr!” At the monster truck nationals last year HELLO! 👋
Hello there!
@@KevinTalbotTV Hey I wish I could join you in your vids cause I have a couple of rc cars and I’m currently training to fly an rc plane on a game called real flight rc simulator
Those on board cameras RULE ❤
I look forward to your videos no matter what time of day thank you so much
awesome action. I love jet boats. I have two from horizon hobby. I did notice when you were rebuilding the impeller there was a gt40 on the bench. I love the gt40 I cant wait to see that video.
Captain Kev
The king of chaos!
Love it 😂
Kev what‘s up? A Video almost every day…i Like it 😏🔥
Hey Kevin, I've been a fan for a long time, my Grandma has recently passed and she always was interested in when I got a new rc car, I made her a custom Nissan Skyline and she'd always drive it around her home, thank you for making me smile when times are tough
Hi kev my fingers are crossed. I have tickets to hopefully win the awesome arrma infraction 🍀🙏🤞🏼🇭🇲
Gotta get a traxxas disruptor!!! You won't be disappointed! I have 2! They are like a traxxas stampede but for the water!
I'm here cause Kev almost hit 3 million
Another great video.
Andy is a legend, always good to see you doing videos together.
Hey, Mate! May you try out the new Traxxas Mini Maxx? Looks like the Mini maxx came to life!
yes!
🎉camboodia🎉
Good job Andy!
Cheers mate :)
6:14 Blast Corps dump truck perfection right there!
Honestly I didn’t know they were 3d printed till you said they were Andie is that good 👍
Very cool little boats, Andy needs to start a business if he hasn't already
Imagine the fun you could of had if you'd of taken it to a lake
I can recommend being careful around weirs.
My next door neighbour went kayaking with his 14 year-old son, and he went over a weir, got sucked into the undertow and drowned. To death.
Outstanding Performance and a job well done. 💪😎🇺🇸
gotta get Stempy out to this spot :D Rob and Stempy DUO!
Put it in, get stuck, put it in, get stuck. Sounds like a nitro 👍
U need the slowmo guys to record ur boat's. 👍👍👍👍
I hope we get a mini max video once it’s released!!!
Anything RC is comparable to a firework it seems, although a thousand pound firework would last longer
You are, without a doubt, my fav! Best RC content on the internet and you make me miss England.
Whaaa happ-unnnd!!! 😧
bro he is so close to 3 mil subs
10 pound a sticker ,,no wound his always happy 😂😂😂
Love the onboard view
Love ya videos kev, or should i say master off destruction😂😂 keep up the good work 👍🏼🇭🇲
Loosest rc channel on YT! Nice one!
Those things are a lot cooler than I thought they'd be and more functional than most of the RC boats you've had on your channel
Have a good day 😊
I have a new RC boat…… and it all goes wrong 🤣 best intro ever
1:19 awesome😊 👍🏻
Hi Kevin I am your big Fan...im from Philippines
ive been a fan for 3 years good content
❤❤❤ Nice video ❤❤❤
DAMN THATS COOL I WANT ONE
Can we get some Scx24 content or any mini crawler content would be cool. Maybe you could get the new Hobbywing motor and ESC combo for 1/24 and 1/18 crawlers and compare it to some others, please and thank you👍
You guys are a complete reverse bucket of laughs , love your videos with Yes Mate, !! 👍👍
Tonight viewing sorted! Thanks Kev can’t wait
Fine gauze will solve the debris problem
yeah, that's what that boat needed....more power lol.....can you control it with 4s? nope, let's try 6s!! hahahaha
YESSSSSS!
Them boats are tough as hell👍👍
Hey Kev! From Windsor Rc Clubhouse
Amazing video Kev the boats are some job mate
One hour gang
👇
Game over :)
What happened? Crazy as always 😁 Stunt boats look great 👍
Motor boat carnage, brilliant video
Great video mate. Need to get them out again at some point :)
Definitely!
I'm just super glad that Rob didn't get footage of me falling in the river and getting absolutely saturated! :D
Thanks Kev...!
Hare Krishna
Living the life Kev :)
I need one now, thanks Kev!
We love Kev! we love kev ! we looooooooove Kevvvv! 😂 nice video man!
Kevin destroys again 😆
I definitely want to get a 3-D printer. Those are absolutely epic lol lol
Great stuff Kev loved it
Keep up the good laughs and the great videos Kev.
Wanted a Thrasher boat until i seen the 1100.00 price 😮
Hey kev love your videos❤ you inspire me to get my own rc someday❤
You guys are wild 😂👍
Hi kev I’m getting my first rc car tomorrow a 3S senton 😊
I want a purple one. 👌🏻
THIS IS AWESOME!
Hi ,great video as usual!!! Can you make a giant hamster wheel and drive rc cars on it?
Rc is crazy
Those things are wicked on 4s even
😮