Just want to inform, that on the drivers side, you have an additional clip locking the bumper into the sidepanel. In your video at 1:00 you see a hole, when you pull out the bumber. On the drivers side this is secured with a clip, you need to unscrew. Also it is worth mention, that you can remove 2 clips at the bottom of the bumper to gain more space for accessing the foglights. Hope this help. c",)
@@diodedynamics I will say the right (passenger side) was definitely harder than the front left because of the window-wash bladder. The LEDs i got have little fans on them so a little extra room would have been nice. Lol
Anyone reading this 2 years+ later, like me...just grab the heads of the rivets with pliers. This will squish the head, but bend the head back into place before reinstalling. This is way easier than Jake's pry-tool method.
If you rather have this done by a professional, we do have a network of certified installers all over the world. You can find one near you at the link below. www.diodedynamics.com/find-a-dealer
Hey there! All 2016 Ford C-Max LED upgrades from Diode Dynamics can be found here: www.diodedynamics.com/by-vehicle.html?find=2014-ford-c-max-377851&sid=Cb1dcA6Zfh
I did this on my 16 and but after the second time my bumper does not want to come off half way its weird I did this before but the second time its alot harder now
Be patient and take a step away from the application for a moment if you have to. You don't want to break those clips! We would recommend buying a clip-removal tool. They're inexpensive and can save you a lot of time!
Just want to inform, that on the drivers side, you have an additional clip locking the bumper into the sidepanel. In your video at 1:00 you see a hole, when you pull out the bumber. On the drivers side this is secured with a clip, you need to unscrew. Also it is worth mention, that you can remove 2 clips at the bottom of the bumper to gain more space for accessing the foglights.
Hope this help. c",)
That's super helpful! Thank you so much for the information!
This was really helpful. Video was made look so easy, but it isn't. Especially the clip you told about was an important part too.
Even easier than the headlight replacement, saving this video to come back when my bulbs come in!
🙌🙌
Thank you for the instructional video. I probably would have broke something without your help, Lol thank you again!
We're glad to help!
very helpful video, I had looked and was wondering how to get at the bulb before seeing this. 20 minute job.
Glad it helped!!
Thank you for this video!!!
Saved me from removing the whole bumper
You're welcome! Glad to help!
@@diodedynamics I will say the right (passenger side) was definitely harder than the front left because of the window-wash bladder. The LEDs i got have little fans on them so a little extra room would have been nice. Lol
Anyone reading this 2 years+ later, like me...just grab the heads of the rivets with pliers. This will squish the head, but bend the head back into place before reinstalling. This is way easier than Jake's pry-tool method.
@Bryan C - a pair of side cutters works really well also.
I put it back together now, what do i do with the extra screws? LOL
I need to change by bulb but I’m afraid I’ll damage my car
If you rather have this done by a professional, we do have a network of certified installers all over the world. You can find one near you at the link below.
www.diodedynamics.com/find-a-dealer
Hey. Do you have a linsed ones for c-max 2016? Or what is the best choice for it? TY
Hey there!
All 2016 Ford C-Max LED upgrades from Diode Dynamics can be found here:
www.diodedynamics.com/by-vehicle.html?find=2014-ford-c-max-377851&sid=Cb1dcA6Zfh
I did this on my 16 and but after the second time my bumper does not want to come off half way its weird I did this before but the second time its alot harder now
That is super strange!
Were can I find nearby, in Rockford il
Hey Ronnie!
You can use our find a dealer tool to find an authorized Diode Dynamics dealer or installer near you.
www.diodedynamics.com/find-a-dealer
Does this apply to the hybrid
It should as long as your hybrid comes with fog lights!
Is there a danger of your SLF LED fog lights melting the harness?
Nope! The SLFs have a heat sink design that keeps them running cool!
Can this be done on a 2020 fusion?
Yes, it can!
www.diodedynamics.com/fog-light-leds-for-2017-2020-ford-fusion-pair.html
I can’t stand ford clips😭 I can’t get them off
Be patient and take a step away from the application for a moment if you have to. You don't want to break those clips! We would recommend buying a clip-removal tool. They're inexpensive and can save you a lot of time!