after the setup cartage get empty i install the ciss with chip but it didn't recognize the ciss i have massage the magenta is damaged i return back to setup cartage the i have same massage
Hi, I have a HP 7110 printer and my yellow cartridge ran out of ink so I refilled it, but my printer keeps alerting me that the yellow cartridge needs to be replaced and wouldn't print colors, only black. Is there a method to bypass the chip verification and to use the refilled cartridge. Should I buy a cartridge with autoreset chip? Will it work? I also read that HP made some firmware updates so aftermarket cartridges wouldn't work. Thanks
The sensor of the internal chamber of the nozzle detects that there is no ink, and the ink can be replenished manually; After purchasing a set of ink cartridges, remove the ink cartridge after starting the refill function. After that, the ink cartridge without the water level is filled with ink, and after the ink cartridge is inserted, the ink cartridge can be printed.
Vent hole ( inner have check valve) on the below of the sticker; You can choose different ways to be closed when Modify to CISS, I changed the cartridge label, think the most convenient and most sealing effect
Hello this system is very good i like it. But as they do so the printer does not block the chips, when you start dialing that the cartridges have ink. As reset the chips?
The first original ink cartridges, no display no ink, you can modify it, do not care about the chip problem. The first original ink cartridges, has shown no ink, you must install have inks of ink cartridges to the printer, let read the information, continue use no ink cartridges to modify to CISS.
Hello, what can i do if my original cartriges display "jellow" no ink? Can i use that cartriges with no ink to make ciss with them? Or i must buy new original cartriges to install ciss?
original cartridges display "no ink", you can Modify to CISS, before loading printer, need have other ink cartridge replace to printer, loading into printers, cleaning nozzles, print the number of sheets of paper, then the new CISS system can be use
Please download US Patent Document US 9,044,939 B2, US 8,474,960 B1 www.refillhouse.com/Download/Patent/US009044939.pdf you will find the Printhead Assembly flow chart.
Recommended do not modify CISS, Only buy a new HP 960XL ink cartridges, use the better filling tool kit, to filling your cartridges, two interchangeable cartridges
Please download US Patent Document US 9,044,939 B2, US 8,474,960 B1 www.refillhouse.com/Download/Patent/US009044939.pdf you will find the Printhead Assembly flow chart.
Art paper too many types, I can't answer you The printer that winds the paper feed is not suitable for too thick paper More than 250 lbs may not be available
Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 almost alot inkjet printer can't work more than 250lbs paper art paper ink as i know just korea and china's made if the paper less than 250 lbs it can printed with the art paper ink ?
Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 of course the ink not the paper ya, all of people say just epson suitable use art ink, as i know which printer can use pigment so it can use art too
I DONT GET WHY TOU REMOVE THE HP STICKER TO THE OTHER SIDE AND THEN COVER WITH ANOTHER HOME MADE STICKER THAT YOU TRIM TO SIZE ON A PREVIOUS COMMENT YOU SAID SOMETHING HINTING AT THERE BEING AN AIR VENT BUT YOU HAVE AGAIN COVERED OVER IT WITH A STICKER SO THE WHOLE THING MAKES NO SENSE?????
It is an air inlet, the printer is modified to supply ink continuously, and the air inlet is to be sealed; I think it is the best material to use a large transparent photo film. You can use other materials, I don't recommend it, After a long time, if the material changes, it will breathe, affecting the operation of continuous ink supply.
No any chip re-setter to this item, but It has two ink level sensors in the upper part of the interior of the printer-head. Continuous ink supply before installation, use of a second set ink cartridge with a ink level display to automatically fill up the sensor space after inserting the ink tank, or disassemble the printer-head some parts and short the circuit contacts that extend the sensor to the outside.
Excellent video; but what is admirable is the patience and meticulousness of the operator.
after the setup cartage get empty i install the ciss with chip but it didn't recognize the ciss i have massage the magenta is damaged i return back to setup cartage the i have same massage
BUENAS TARDES TENGO UNA IUMPRESORA HP 7110 PERO TIENE UN PROBLEMA SE GOLPEA EL CABEZAL CON LA IMPRESORA DEL LADO IZQUIERDO QUE PUEDE SER???
hello this is very interesting i liked it but my question is where did i find the things that u are using it to refill pleas i want the answer
if only refill, please link
www.refillhouse.com/index.php?route=product/product&path=24_76&product_id=95
is this useful or damage the printer?
This is only required for users with a large number of prints.
After a period of use, maintenance is required.
Hello po. Kung mag pagawa po magkano po.?
Hi, I have a HP 7110 printer and my yellow cartridge ran out of ink so I refilled it, but my printer keeps alerting me that the yellow cartridge needs to be replaced and wouldn't print colors, only black.
Is there a method to bypass the chip verification and to use the refilled cartridge.
Should I buy a cartridge with autoreset chip? Will it work? I also read that HP made some firmware updates so aftermarket cartridges wouldn't work.
Thanks
The sensor of the internal chamber of the nozzle detects that there is no ink, and the ink can be replenished manually;
After purchasing a set of ink cartridges, remove the ink cartridge after starting the refill function.
After that, the ink cartridge without the water level is filled with ink, and after the ink cartridge is inserted, the ink cartridge can be printed.
Why do you change the cartridge label? Any specific purpose?
Vent hole ( inner have check valve) on the below of the sticker;
You can choose different ways to be closed when Modify to CISS,
I changed the cartridge label, think the most convenient and most sealing effect
Hello this system is very good i like it.
But as they do so the printer does not block the chips,
when you start dialing that the cartridges have ink.
As reset the chips?
The first original ink cartridges, no display no ink, you can modify it, do not care about the chip problem.
The first original ink cartridges, has shown no ink, you must install have inks of ink cartridges to the printer, let read the information, continue use no ink cartridges to modify to CISS.
Hello, what can i do if my original cartriges display "jellow" no ink? Can i use that cartriges with no ink to make ciss with them? Or i must buy new original cartriges to install ciss?
Do you have an account on ebay, where can i buy your products?
original cartridges display "no ink", you can Modify to CISS,
before loading printer, need have other ink cartridge replace to printer, loading into printers, cleaning nozzles, print the number of sheets of paper, then the new
CISS system can be use
if requirement the CISS kits or more information, please write to refillhouse@livemail.tw
price for hp wide 7110 plz shipping to lebanon
can it use refillable catridge with ARC Chip ?
Please download US Patent Document US 9,044,939 B2, US 8,474,960 B1
www.refillhouse.com/Download/Patent/US009044939.pdf
you will find the Printhead Assembly flow chart.
you can use ARC Chip.
Is the ink good for HP Officejet 7612 too?
I am in Taiwan, the inks, please buy from local
we don't have your ink here
How to install CISS in HP Officejet 3610/3620? It uses Hp 960 cartridge. Thx in advance.
Recommended do not modify CISS,
Only buy a new HP 960XL ink cartridges, use the better filling tool kit, to filling your cartridges, two interchangeable cartridges
Hello . How much does the bulk ink kit? Do you send to Brazil?
HP 932-933 CISS Series;
if any refill and CISS question, please contact refillhouse@livemail.tw
Hi
I am from Jordan
How do I get this package complete and what the price is approx
we offter this package, more details , Contact me Krystal : Whatsapp+ 86 18002847197 Skype : Krystal fu+86 180 0284 7179
how it resets , its Original carts
Please download US Patent Document US 9,044,939 B2, US 8,474,960 B1
www.refillhouse.com/Download/Patent/US009044939.pdf
you will find the Printhead Assembly flow chart.
Can i use sublimation ink on this printer? Thnx
Nop
are this printer can use art paper ink ?
Please refer to the applicable paper specifications of the original manufacturer's manual.
Art paper too many types, I can't answer you
The printer that winds the paper feed is not suitable for too thick paper
More than 250 lbs may not be available
Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 almost alot inkjet printer can't work more than 250lbs paper
art paper ink as i know just korea and china's made
if the paper less than 250 lbs it can printed with the art paper ink ?
Are you asking art paper ink?
You have to change the ink, it seems that only the epson printer can be used for art paper ink.
Refill House-填充小站-噴墨印表機-墨水-連供-改機-連續供墨-解碼-修復-填充專家 of course the ink not the paper
ya, all of people say just epson suitable use art ink, as i know which printer can use pigment so it can use art too
您的视频都非常精彩，并且非常专业。已经订阅，经常观看学习。
想请教关于7110的故障，非常感谢。
用的是连续供墨系统，在试着打印纯色块，只有黄色黑色打印完整，红色蓝色只能部分出墨，我试着手动清洁干净喷头，然后重新加入墨水也没有起作用。在手动清洁的时候喷嘴是完整出墨的，没有堵塞。
使用副廠墨盒,時常會發生供墨不順利,原因在於墨盒內部單向球(閥)卡住,更換墨盒可能解決問題
@@refillhouse 我试着把黄色墨盒与的蓝色墨盒交换位置，结果还是蓝色的打印不出，而黄色的可以打印正常，不地现在打印出来的是蓝色墨水。这样判断可以确定是打印头蓝色有问题。
我重新拆下拆出来取下带弹簧那部分的玻璃纸好像密封不严了，试着揭下来上机测试，打印了三四页结果黄色也不出了，只剩黑色正常。
不知道这个塑料纸怎么粘回去比较结实，这部分作用也不懂，还有墨盒结构也没理解怎么动作
@@refillhouse 并且在清洗的时候红色蓝色墨水会倒流，而不是向墨盒方向流动
你的打印機經常性的進行判讀墨水, 原始錯誤點是噴頭內部的水位感應偵測被短路,噴頭感應經常回到原點;
目前,有彈簧的上維護單元已經損壞,可以單獨購買到此單元
此薄膜,為PET薄膜, 熱熔線已斷損(反灰)你輕輕一碰,就被你撕下來,
如果找的到PET膠, 可以剪一片PET包裝紙, 黏著替換
祝成功
維護回路系統 故障
Would like to purchase one. Do you ship to the United States?
please later 2 - 3 weeks
I DONT GET WHY TOU REMOVE THE HP STICKER TO THE OTHER SIDE AND THEN COVER WITH ANOTHER HOME MADE STICKER THAT YOU TRIM TO SIZE ON A PREVIOUS COMMENT YOU SAID SOMETHING HINTING AT THERE BEING AN AIR VENT BUT YOU HAVE AGAIN COVERED OVER IT WITH A STICKER SO THE WHOLE THING MAKES NO SENSE?????
It is an air inlet, the printer is modified to supply ink continuously, and the air inlet is to be sealed; I think it is the best material to use a large transparent photo film.
You can use other materials, I don't recommend it,
After a long time, if the material changes, it will breathe, affecting the operation of continuous ink supply.
@@refillhouse ok i see so your replacing the sticker as it will fail with something longer lasting, ok got it
In the beginning, I tested several methods. Using stickers is the easiest, best to use, and will not fail.
How do you reset your chip?
No any chip re-setter to this item, but
It has two ink level sensors in the upper part of the interior of the printer-head.
Continuous ink supply before installation, use of a second set ink cartridge with a ink level display to automatically fill up the sensor space after inserting the ink tank, or disassemble the printer-head some parts and short the circuit contacts that extend the sensor to the outside.
so u saying that when ink level is low, I have to use original catridge with full ink to reset that ink level? then reinsert CISS system?
i need that ink system, where i must buy it?
we need your E mail, please sent to our mail address refillhouse@livemail.tw
we can offter,, more details , Contact me Krystal : Whatsapp+ 86 18002847197 Skype : Krystal fu+86 180 0284 7179
kindly expline for printer hp inkjet pro 8720
Sir please provide My printer 7110 in full step sir
シール剥がすとこくらい早送りしろや
hp