Wow the elements really hit that one. I stash mine in the garage and soft spray it off. Pressure washers do a number on some paint so I avoid if I can. My stickers started pealing first month though..smh
Those look like "rod ends" that link the lever. The eyes are probably wallered out, but I would guess you could find an off the shelf part to replace. I would check the parts diagram from new Holland and you may be able to buy from them unless it's only sold as an assembly.
“Rod ends” thanks for that info, I didn’t know what it was called! Yeah the new holland manual doesn’t specify the size or thread, I went to the new holland dealer near me and they were only able to find me the whole assembly for like $250 but it didn’t list the specs.
You should be able to get some digital calipers on the ID of the bore but it might be better to pull a less worn rod end or just measure the OD of the mating part. If you take it apart you could just take it to your local hardware store and they could tell you the thread size. Good luck!
Yeah its like 250 bucks. Such a rip off. Ive wasted like 110 on trying to emulate the correct rod sphere but cant find them so im going to have to bite the bullet
This was a great video. Thank you for the good and the bad parts of the tractor. I’m looking to buy something for my hobby homestead. Are you able to buy attachments for this tractor?
I've been told it would help but the 25s isn't really meant for excavating with the front, it was meant for transfering materials and some light grading with gravel and such
Mine is self destructing. 27hrs and has multiple issues, including leaving the factory with wrong pinion. Seriously underpowered. Shakes so bad my teeth are falling out.
This isn't like a normal tractor and when i drive it is weird. Like the break is where the clutch normally is and the forwards and backwards pedals are where the brakes are. And the arm control is near the dash and not the seat.
This guy pick the tune, acording to his talking speed! It's a torture to me, being an ADHD on steroids 😅😅😂. But great video! Nothing wrong with you slow talking brother, is just me, youre OK!🕊️
The funny part of all is that's, I just now cot your first name, actaly you crank the speed dilemma a bit, when you announced it😂😂, My name also is Antonio. The poisonshot2020 was created in protest of the 2020 created virus and the forced on ppl the shots. What is your opinion on the 25s, after the 9 months? Mower specialy, lot of dealers advice not to get it, due to the difficulty of removing and place it back, plus having the backhoe. Be well and May God Bless !
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
Thanks for this review, it was very helpful and more importantly, thank you for your service to our country.
You’re very welcome, and Oorah
Tnxs Tony, big help, I'm buying one this month.
Did you get one
Wow the elements really hit that one. I stash mine in the garage and soft spray it off. Pressure washers do a number on some paint so I avoid if I can. My stickers started pealing first month though..smh
Good quality compact
Those look like "rod ends" that link the lever. The eyes are probably wallered out, but I would guess you could find an off the shelf part to replace. I would check the parts diagram from new Holland and you may be able to buy from them unless it's only sold as an assembly.
“Rod ends” thanks for that info, I didn’t know what it was called! Yeah the new holland manual doesn’t specify the size or thread, I went to the new holland dealer near me and they were only able to find me the whole assembly for like $250 but it didn’t list the specs.
You should be able to get some digital calipers on the ID of the bore but it might be better to pull a less worn rod end or just measure the OD of the mating part. If you take it apart you could just take it to your local hardware store and they could tell you the thread size. Good luck!
I've had the same problem with the joystick. They do have a kit to rebuild them
Yeah its like 250 bucks. Such a rip off. Ive wasted like 110 on trying to emulate the correct rod sphere but cant find them so im going to have to bite the bullet
@@BULL-and-WRENCH I just ordered mine from Chattanooga Tennessee it was 125 .
@@RobertRogers-i3x what was the website?
This was a great video. Thank you for the good and the bad parts of the tractor. I’m looking to buy something for my hobby homestead. Are you able to buy attachments for this tractor?
Yes there's a lot of attachments for it including mower deck and there's a PTO on the back for all your attachments
Do you have a cutting blade on your bucket? Ive been told i need one but im not doing crazy work.
I've been told it would help but the 25s isn't really meant for excavating with the front, it was meant for transfering materials and some light grading with gravel and such
😎👍👍
Farm Implement Blue epoxy from Rust-Oleum is a near perfect color match for your backhoe
Thanks for the help!
Mine is self destructing. 27hrs and has multiple issues, including leaving the factory with wrong pinion. Seriously underpowered. Shakes so bad my teeth are falling out.
😂
Move to my town and you will fit right in, they name it toothless town!😂😂😂
Did you get that sorted out
@@BULL-and-WRENCH I gave up.
This isn't like a normal tractor and when i drive it is weird. Like the break is where the clutch normally is and the forwards and backwards pedals are where the brakes are. And the arm control is near the dash and not the seat.
It's a hydrostatic transmission so some of the controls will be different
This guy pick the tune, acording to his talking speed! It's a torture to me, being an ADHD on steroids 😅😅😂. But great video! Nothing wrong with you slow talking brother, is just me, youre OK!🕊️
Lol we talk a little slower in the country, bear with me 😆
The funny part of all is that's, I just now cot your first name, actaly you crank the speed dilemma a bit, when you announced it😂😂, My name also is Antonio. The poisonshot2020 was created in protest of the 2020 created virus and the forced on ppl the shots. What is your opinion on the 25s, after the 9 months? Mower specialy, lot of dealers advice not to get it, due to the difficulty of removing and place it back, plus having the backhoe. Be well and May God Bless !