Brit here. Over this side of the pond, B2 Audio is highly regarded. Not only is the budget range (Riot Series) affordable, but Riot subs perform better than some companies top-of-the-range drivers. The recently updated Rage v2 series are fantastic daily-drivers (my next purchase hopefully). The Rampage XM uses the underhung magnet design similar to the original Adire Audio drivers. B2 will also make custom, one-off driver builds that can be specced with up to a 6" voice coil. And of course, they make the reknowned 33" chassis drivers that Steve Meade uses in his home theatre build. I also love the fact that B2 don't share their driver chassis with any other company. Every cast basket they use is designed and built just for their own drivers. Sundown, for example, buy an off-the-shelf basket for all their drivers up to and including the U-Series. You need to pay four figures before your Sundown sub comes with a custom basket. As you can prob tell, I'm a bit of a B2 fanboy. Shameful maybe , but I don't care. The only other company i respect as much as B2 Audio is Fi Audio (those who know about Scott Atwell's impact on car audio driver design will understand why). edit: Forgot to mention that in 2019, B2 Audio subs were used to break the SPL world record with a 184.9 dB (but to give respect where it's due, Sundown drivers broke the record with a 185.2 dB in 2022).
B2, edge, inphase, dd, ct sounds has same baskets from same China factory. Amps chinese with generic boards, some models are complete unstable rubish as rage 16k. What are you tapking about, B2 do not design any of their stuff
That's awesome power output for a 4-channel. I've got a monster 4-channel amp that blows away everything else I've had. It's a MMATS Hifi 4250, the specs are: 250×4 @ 4ohms 400×4 @ 2ohms 800×2 @ 4ohms bridged It's a full-range class D and highly recommend you check it out.
I am seeking a solution where the car speaker initially runs from the factory output signal, but switches to the amplifier output once the car engine starts. This setup aims to conserve the car battery by preventing it from draining power when the car is not running, while still allowing me to enjoy music from the factory radio, as it consumes less power.
this is a better amp better signal to noise, better dampening, tiffany rcas, side vents instead of bottom . i was between both of these also chose this one
WOW over $500. Glad I came back in the game at the right time. Got 2 recoil 1200.4’s $89 bucks a piece. Don’t see a need to spend an extra $400 just for a name.
I wouldn’t support that hateful human being that clearly owns recoil in some way. Robot underground… talks shit about everyone in this space. I wanted to run recoil. I have more integrity to run equipment that is sold by decent humans.
VECTOR, I wanted to thank you for posting DYNOs of more multi channel amp. Far more than the other guys. Monos are fun to watch. The multi channels are where the music comes from in daily drivers. Thanks for taking the time to showing what’s available.
@@PunisherOfDeath101 Those who know know. Compare this $470 amp to the Recoil DI1200.4 which literally tested the same exact wattage at $125. No one can explain to me the difference. Not one person. Go figure.
Can't go wrong with b2 audio. Definitely my go to brand with subs and these amps look solid and clean
Brit here. Over this side of the pond, B2 Audio is highly regarded. Not only is the budget range (Riot Series) affordable, but Riot subs perform better than some companies top-of-the-range drivers. The recently updated Rage v2 series are fantastic daily-drivers (my next purchase hopefully). The Rampage XM uses the underhung magnet design similar to the original Adire Audio drivers. B2 will also make custom, one-off driver builds that can be specced with up to a 6" voice coil. And of course, they make the reknowned 33" chassis drivers that Steve Meade uses in his home theatre build.
I also love the fact that B2 don't share their driver chassis with any other company. Every cast basket they use is designed and built just for their own drivers. Sundown, for example, buy an off-the-shelf basket for all their drivers up to and including the U-Series. You need to pay four figures before your Sundown sub comes with a custom basket.
As you can prob tell, I'm a bit of a B2 fanboy. Shameful maybe , but I don't care. The only other company i respect as much as B2 Audio is Fi Audio (those who know about Scott Atwell's impact on car audio driver design will understand why).
edit: Forgot to mention that in 2019, B2 Audio subs were used to break the SPL world record with a 184.9 dB (but to give respect where it's due, Sundown drivers broke the record with a 185.2 dB in 2022).
I don’t know about there speakers but I can guarantee the amps are coming from china and anyone can buy them I got the 🔌
B2, edge, inphase, dd, ct sounds has same baskets from same China factory.
Amps chinese with generic boards, some models are complete unstable rubish as rage 16k.
What are you tapking about, B2 do not design any of their stuff
Congrats on the new Dyno I look forward to many amplifiers' videos!
Love B2 equipment! Running 4 rage 8s w riot components looking forward to trying the amps , thanks for the review
That's awesome power output for a 4-channel. I've got a monster 4-channel amp that blows away everything else I've had. It's a MMATS Hifi 4250, the specs are:
250×4 @ 4ohms
400×4 @ 2ohms
800×2 @ 4ohms bridged
It's a full-range class D and highly recommend you check it out.
I’ll keep that in mind for the future thank you
That's a beast of an amp
I am seeking a solution where the car speaker initially runs from the factory output signal, but switches to the amplifier output once the car engine starts. This setup aims to conserve the car battery by preventing it from draining power when the car is not running, while still allowing me to enjoy music from the factory radio, as it consumes less power.
Nice I like it.
Can you do the stetsom bass flex 3k? or 5k? or stetsom bass 3k? or 5k? Can’t find a good dyno of them
Does anyone have a link to where there's an existing list of where car audio components are currently being manufactured?
Thanks in advance 😁👍🏽
China bro I can put my life on it
Out of curiosity, when you are testing the amp in non bridged mode do you load down the remaining 2 channels?
Right because if he didnt then all the numbers are voided. The powersupply isnt being placed under a full load.
@@ericperry72, not necassarily just need to know for amplifier comparison sake. It is hard to tell when the amp connections aren't shown.
Yes all 4 are loaded
@@HiFiVector, ok thanks. That is good to know.
You should make a video on the DD 4.200 I was between this amp the B2 and the DD ended up buying the DD 4.200 hope I don’t regret it later 😂
this is a better amp better signal to noise, better dampening, tiffany rcas, side vents instead of bottom . i was between both of these also chose this one
There is a new audio pipe Subwoofer for you. Might do a review on and nobody has it out yet, TXX bdx
This amp or the recoil dii 1200.4 ?
I’d take this personally
@@HiFiVector the recoil makes more power right? and costs 120 130?bux u can get 4 of those for the price of one of these ?
@@jimmiedean8035 no such thing as a mid range amp dude ur whole comment makes no sense a distortion bubble?
@@jimmiedean8035 the amp plays 40 htz just as loud as 1k and by loud I mean wattage it's the same amount of output
@@jimmiedean8035 yeah a harmonic range is where the says it plays 20-20khz for example.
WOW over $500. Glad I came back in the game at the right time. Got 2 recoil 1200.4’s $89 bucks a piece. Don’t see a need to spend an extra $400 just for a name.
Some people are happy with a Kia.
I wouldn’t support that hateful human being that clearly owns recoil in some way. Robot underground… talks shit about everyone in this space. I wanted to run recoil. I have more integrity to run equipment that is sold by decent humans.
VECTOR, I wanted to thank you for posting DYNOs of more multi channel amp. Far more than the other guys. Monos are fun to watch. The multi channels are where the music comes from in daily drivers.
Thanks for taking the time to showing what’s available.
Get big Jeff to send you rage and rampage subs to compare if he hasn’t already
Wait... Denmark manufactures the B2 Audio brand?, mannnnn that sounds so much more satisfying than "made in china".
Don’t fool yourself
They are made in china
I think all 4 channel amps should have a ×10 in the crossovers
If you want to try out my B2 Ref4, hit me up
👍👍👍...🍻👊
Looks like a basic s&i class d
Same stuff ds18 sells, just a different layout.
It’s literally what it is
@@TheGodofSEO that f up with that price. SMH on b2 cash grab
@@PunisherOfDeath101 Those who know know. Compare this $470 amp to the Recoil DI1200.4 which literally tested the same exact wattage at $125. No one can explain to me the difference. Not one person. Go figure.
I bet this amp is pricey power to money value.
Be squared