How to test lnb with multimeter. Universal lnb
HTML-код
- Опубликовано: 7 янв 2018
- Learn about how to test lnb with multimeter
Lnb test
If not showing any number it's not working
If 1 side showing number it's not working properly
Thanks for watching
Kumar s Pradhan
Good job bro👍
My multimeter has figure 1 showing when it's power is turned on in the buzzer position- should that be? When I did the test one probe on outside one probe up the middle - that number stayed in window?
The meter appeared to be working as the buzzer worked if I touch both on outside of lnb?
Nice sir
What should be the reading if the LNB is working ??
0
superb
Topo demais 😊😊😊
1 = zero ?, on a volt-ohm meter a reading down to .0 shows it conducts eletricity , I know what you meant , you said zero , i thought it reads 1 on left side of the volt ohm meter, so 1 = zero, its confusing ?
When you put the leads together it showed 0.02 basically a short circuit zero ohms. When you seperated the leads it showed the 1 open circuit or higher ohms, normally you would have to altar the ohms to a higher setting but as you were using the buzzer for continuity it showed the 1, open circuit. Couldn't hear if the buzzer was sounding because of the music. Thanks for your efforts. Keep safe you and yours. If I have made an error please put me right.
It is not a 1 (one) it is an I (capital i) and it stands for infinite meaning there is an infinite amount of ohms between the points of the two leads.
@@MrGoogelaar Nice one. Yes of course it is infinite, as I said open circuit, but you must admit it looks like a digital 1. Like when it reads 1216 at 51 secs the I is as the digital one. What do you think. Thanks for the reply. Keep safe you and yours.
@@Ilovetosingem People often ask me why the meter displays a one when it measures an open circuit so I am so used to explain what it really is when somebody mentions it, some meters display OL for open loop.
@@MrGoogelaar Thanks for the prompt reply, refreshing! I understand. Wouldn't you have thought it would be OC open circuit? Thanks again.
@@Ilovetosingem No, definitely OL, it is quite common on multimeters.
Tamo juntos 😊😊😊
Black center and red outside = 645 red center black outside - no number. is it working or not?
very confused show.
Bhai wire kaise check karte hai?
Multimeter se v kar skate ho
if one side give beep but the other side do not give beep
is it working or. not
No
Bhai Mera ek side show number dusri side no show number
Sir malakas music
bhai ye lnb mere dish me
Kya hua Apke dish