Don't think so, the only must have part there is the "black rectangular box" connected with two bolts - that's your keyless entry sensor. If it's removed keyless entry won't work.
Are u local I'm missing a center floor console and have no idea how to do this I have no where to plug in my charger used to be copy car and just left all wiring plugs
@@vladsiyanov5389 yeah I did but sounds complicated I looked at the consoles for my vehicle but their at 700.00 oem part police package for my 2017 Dodge charger police pursuit it's missing everything not sure where to start
@@silvermadero1186 I think I paid around 300$ for mine, was a while back. Inflation :) anyhow when I was doing mine I had 0 info at all, you have a head start
@@silvermadero1186 You’re probably looking at new ones, you have to search Junk yards for them. It’s a bit more expensive on the 2015 and up one though. It’s not hard to install.
Hi Vlad, when i bought my 2011 police pack i had a message on my dash bord saying " Service Keyless System " and i was never able to find the problem as per why the key is not detected. I changed the battery in the keyfob but didnt help. When i start the car i always have to press the push to start button with the key itself or it womt detect the key and will not start. Do you have an idea on how to fix that ?
Hey Milos. So I got this issue when I disconnected the little black box bolted down in the middle there. My guess is your issue is with it, so check the connecting cables or if that box is there altogether. This may be a "take it to the dealership" kinda issue, because if you need a new box like that, it would need to be programmed to your car and your key.
Your missing the small black Keyless entry antenna you see in most videos. On 2011 Pursuit the wire in not on the main cable like other years. Yours in built into the bigger gray plug you see. The antennas are universal from 2011-2014 and no programming is needed, just plug it in and it will work. Nenno harness part # 1189509AC2
Yeah. I tried to see which one was blown, but couldn't find it. Didn't bother looking too much into it since I didn't need that many wires, but I'm sure there is a blown fuse somewhere there
I got you, so you just tied it in with one of the hot wires? I didn't know if yours had the wire coming from the front to support that 12v connection. Mine doesn't.
Very helpful, just a purchased pursuit, had center consul in it, however not wired up...thank you.
you bought it from a middle man probably..
Im soon to be in process of doing a charger rt cabin harness swap so everything connects n works fine w o cutting n splicing wires
which wires did they use to connect the computer ?
Plug n play adapters are available on Amazon and ebay now. I make a few different types.
Got any links ?
@@Jacob-kdp Amazon too but they won't let me use the word "Dodge" in the title so they are hard to find. Frustrating at every turn.
Great video thank you. And Please tell me if there is a bypass cable location is there for 12+8 cable dodge charger 2014 ?
Hi Vlad, I have 2013 police charger, but I bought a 2015 console, and the wires don't fit, my aux and USB don't work, can u help me
Vlad where did you purchase the front leather seats
Where did you get the consule ?
Do you need the gray interface module? My charger has this removed. No console, going to install one. Everything runs good.
Don't think so, the only must have part there is the "black rectangular box" connected with two bolts - that's your keyless entry sensor. If it's removed keyless entry won't work.
no, you do not need it. In fact, if you are planning to install the air duct, you need to remove it out of the way.
If you press your lock button three times does your car auto start
The pursuit doesnt have remote start
Is that console called a "Front Console Assembly
Dodge Charger" on car-part.com? Just brought home a 2013 from auction. THANKS!
yeah, front floor w/o police package. can see it in the photos in the search
Where did you get the consule from?
Hey what is the USB used for? I was able to connect it to my console but I don't know what it does.
The USB is used for media. If you load it up with music, the radio will play music from it. It may or may not be for charging as well.
Are u local I'm missing a center floor console and have no idea how to do this I have no where to plug in my charger used to be copy car and just left all wiring plugs
Did you watch the video? )
@@vladsiyanov5389 yeah I did but sounds complicated I looked at the consoles for my vehicle but their at 700.00 oem part police package for my 2017 Dodge charger police pursuit it's missing everything not sure where to start
@@silvermadero1186 I think I paid around 300$ for mine, was a while back. Inflation :) anyhow when I was doing mine I had 0 info at all, you have a head start
@@silvermadero1186 You’re probably looking at new ones, you have to search Junk yards for them. It’s a bit more expensive on the 2015 and up one though. It’s not hard to install.
Hi Vlad, when i bought my 2011 police pack i had a message on my dash bord saying " Service Keyless System " and i was never able to find the problem as per why the key is not detected. I changed the battery in the keyfob but didnt help. When i start the car i always have to press the push to start button with the key itself or it womt detect the key and will not start. Do you have an idea on how to fix that ?
Hey Milos. So I got this issue when I disconnected the little black box bolted down in the middle there. My guess is your issue is with it, so check the connecting cables or if that box is there altogether. This may be a "take it to the dealership" kinda issue, because if you need a new box like that, it would need to be programmed to your car and your key.
@@vladsiyanov5389 All good i will verify that. Thanks for the reply 👊
Your missing the small black Keyless entry antenna you see in most videos. On 2011 Pursuit the wire in not on the main cable like other years. Yours in built into the bigger gray plug you see. The antennas are universal from 2011-2014 and no programming is needed, just plug it in and it will work. Nenno harness part # 1189509AC2
Can replace blown fuses, no?
Yeah. I tried to see which one was blown, but couldn't find it. Didn't bother looking too much into it since I didn't need that many wires, but I'm sure there is a blown fuse somewhere there
How did you set up the front 12v port?
Same as all the other 12v s
I got you, so you just tied it in with one of the hot wires? I didn't know if yours had the wire coming from the front to support that 12v connection. Mine doesn't.
80 Bucks? Dam
That how mines looks but it starts