OWC Express 4M2 modify
HTML-код
- Опубликовано: 14 окт 2024
- Come rendere più silenzioso l’ OWC Express 4M2.
Costoso, ma hanno elemosinato sulla ventola di raffreddamento.
Vediamo come rendere più silenzioso questa unità ssd m2
Link ventola:
Tangxi Ventola Stampante 3D 2Pcs, Ventola di Raffreddamento Stampante 3D 80x80x10mm,DC 12V 6000 RPM 21.46 CFM Super Silenzioso 8010 Ventola per CR-10 amzn.eu/d/0Mz6yEn
Link step-down:
ARCELI 5Pcs MP1584EN ultra piccolo DC-DC 3A potenza step-down regolabile modulo convertitore buck 24V a 12 v 9 V 5 V 3 V Arduino amzn.eu/d/ijS29QH
OWC should be ashamed for putting such a lousy design on thr market. Great job in modifying it!
BTW, just watched a video of a guy who completely removed the fan and been using it fanless for quite some time, now...
Great stuff. U had me getting ready to replicate this, till I saw the soldering involved. 😅😂
Wow...I hope OWC watched this video and took notes.
Bearing in mind also - that flash memory (NAND) prefers 40C (especially during write cycles) - temps under that diminish longevity. Only the controllers need cooling, so in theory, small heat sinks on the controller only, might be best So many bloody details with this tech!
Marco sei stato in gambissima !!!
e complimeni per il video con la musica azzeccata!!! 😄😄
COMPLIMENTI ! 👍
I've just removed the fan and its harness entirely and strapped individual m.2 heatsinks (7$) on each SSD. Temp has been stable at around 40C and absolutely zero noise coming from the 4M2
no
@@RAIMAN-nc5ht no what? they run cooler than the internal ssd on my mac studio 😂
damn. I was just expecting simple swap out fan... but you took it to another level hahaha well done!!
Wow. Great work! Would have been interesting to see a dB measurement too for a loudness comparison. What's the heat rating of the plastic material you used for 3D printing the frame?
AMAZING WORK.
where can i download the 3d model for the fan bracket?
Any chance to download the 3d model for the fan bracket?
Do you have the 3d model so I can print it for my device?
Same question here, would really like to have the 3d model, Please 🙂
What I did was to just remove the two screws holding the fan in place and slip orings over the post and replaced the fan and screws. Quiet.
Agree, it is mostly the vibration transmitted, not the noise of the fan itself, it is pretty quiet outside.
How the hell do OWC get away with making such noisy products ? Are all the staff deaf in the OWC design departement?
Producers get away with stupid design as long as customers buy them.
owc should hire you!!!
I admire your dedication to DIYing the F out of that. But I probably would have just installed a Noctua and called it a day.
Can you upload your 3D CAD files please? I would love to mod mine the same way!
The new ones must have upgraded fans because I just bought 2 of the enclosures and they are totally silent. I made an 8 TB Raid level 0 array and a 16 TB Raid level 0 both using Apple RAID software. I love them both! Highly recommended
Don, could you please upload a quick cell phone video of your drive? I'm strongly considering this enclosure and I'd love to hear it.
I just bought one and mine sounds at least as bad as this one. Crazy why manufacturers of HDD/SSD enclosures pay so less attention to noise. I already had two extremely noise LaCie enclosures and thought it's a LaCie thing. But nope.
Or maybe you are more tolerant of noise? or maybe your place has other sources of noise like air-conditioned?
It is mostly the vibration transmitted by the fan bracket to the rest IMHO. by changing the material the vibration are not transmitted as much as with the original bracket.
Just received one today and it is noisy. Nothing catastrophic but not pleasant.
ciao, si può avere il link del modello 3d supporto della ventola?
OWC could put a basic temp based controller, not that expensive. They have 600$ plus boxes with no temp control. Also a little bit of design will help, for example the mounting.
Good job but for me it's no. The product is expensive and on top of that I still then have to find a solution to not have it so noisy? As you have shown it could have been better engineered.
removing the fan altogether just using heatsinks seems the most sensible to me
Why not simply attach the fan to the sliding external case?
Can you send me the 3d modeling file?
Shame on OWC. Absolutely unacceptable design.
Mi accontenterie di aver ela tua situazione originale, il mio appena acceso sembra una macchina degli anni 60 che deve riscaldare. Poi migliora un po ma assolutamente molto piu rumoroso di quello che vedo nel video. Geniale situazione, per chi ha manualità e attrezzatura per farla io sono fottuto