Doing a music venue with 4 nightclubs. We used this tutorial to create a wall graze family using an IES file. Super helpful and really appreciate you taking the time to produce this. We modified the family to be a ceiling based family so it would schedule.
Great as usual! Quick question, when you want to add a material quickly, you change the material, wouldn't be faster to apply a paint of that material? Does it differ from changing the material of the whole wall?
Great tutorial, my problem is that when loaded to the project, the family will be considered as a Generic Model (15:38) and not as a Lighting Fixture family, thus making it incapable to be included in any Luminaire schedule.
Good Afternoon Sir , How Are You , I Just Have Little Problem , That I Can't Load The Light Point That I Make To The Linear Strip , Is This Not Work In Revit 2018
Dear every thing work good till I was adding my component to ceiling. It gave me this massage "Can't cut instance(s) of strip light 100 mm wide out of its host." Please help in order to solve
Hi,I have created sme family with you but when ı load it into my project it gives ''Can't cut instance(s) of Type 1 out of its host.''.When ı try it at a new project ıt works but it doesnt work in my crrent project
Hi Balkan Architect, i went through everything you did but unfortunately it will not let me array my lighting source. Any advice? Youre videos are absolutely helping with my master program. I do not know what i wouldve done without your videos.
I keep getting this message ''Can't cut instance(s) of Type 1 out of its host.''. Kindly help. Note: I model in phases and this message keeps appearing when trying to mount the family in my new sealing. tried the existing and same issue. Kindly advise.
@@letapham no....only way if ur looking for render ...make any linear component -vray -emmisive material ....that process which he explained was very lenghty
This program looks amazing, is it easy/flexible to use? I have a cheap starter program "Architect 3D ultimate+" and to be honest it is not easy to use, each object/point placement or creation you have to do freehand and has some options for accuracy. Does Revit make that sort of situation any easier? I need to know what I should invest in for the future.
Hi Balcan Architect, nice job! i have a question, why can't i see your REVIT version on top? its shown just 'BALCAN ARCHITECT TUTORIAL'. is there a way to not to show the revit version on top? thanks
Hi milos, I texted you to the facebook messenger about the office buildind section, there are two images, I couldn't do it from here, I hope you can help me with what I ask you there, thanks, have a good one
Instance Parameters can't be used in Type Parameter formulas. Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".Instance Parameters can't be used in Type Parameter formulas. Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".Instance Parameters can't be used in Type Parameter formulas. Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".Instance Parameters can't be used in Type Parameter formulas. Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".
Doing a music venue with 4 nightclubs. We used this tutorial to create a wall graze family using an IES file. Super helpful and really appreciate you taking the time to produce this. We modified the family to be a ceiling based family so it would schedule.
Im going to try this out!! I sww your tutorials a lot but almost none works for me. Definitely gonna try this one, though!
Great that you're explaining this is definitely an eye-opener for me.
Great vidoe. Thank you so much. I've learnt a lot about revit from you. Stay bless.
thank you, your tutorial is a big help.
Great explanation! Congratulations!!!
Awesome tutorial agajn!
You are the great sir
Very handy. Thank you.
what is the reason why my light source is not visible when i insert the light point component into my project
Great video very informative
sir not show in load in project and close ...the small er one light what to do
Thnx u so much
My renders are pitch black, I followed exactly. Not sure what's going on.
Love your work and i wanted to ask if you could show us how to make a spiral staircase with a landing in the middle. Thank you
Great as usual! Quick question, when you want to add a material quickly, you change the material, wouldn't be faster to apply a paint of that material? Does it differ from changing the material of the whole wall?
Great tutorial, my problem is that when loaded to the project, the family will be considered as a Generic Model (15:38) and not as a Lighting Fixture family, thus making it incapable to be included in any Luminaire schedule.
Very nice video. I created the light but my renderings stay black? I guess I mucked up the light source somewhere but can't find it. Any suggestions?
I think u give less Watts
Good Afternoon Sir , How Are You , I Just Have Little Problem , That I Can't Load The Light Point That I Make To The Linear Strip , Is This Not Work In Revit 2018
Dear every thing work good till I was adding my component to ceiling. It gave me this massage "Can't cut instance(s) of strip light 100 mm wide out of its host." Please help in order to solve
I just want it. can i just buy it somewhere
Im just doing this using model in place ...is it okay?
I have an issues with model when ill place the light strip into the model it doesn't give a light effect to model
Please suggest me something
Gracias
How about creating aluminum strips ceiling?
Good,but how to create LED strip for different structures of ceiling .
Hi,I have created sme family with you but when ı load it into my project it gives ''Can't cut instance(s) of Type 1 out of its host.''.When ı try it at a new project ıt works but it doesnt work in my crrent project
Hi Balkan Architect, i went through everything you did but unfortunately it will not let me array my lighting source. Any advice? Youre videos are absolutely helping with my master program. I do not know what i wouldve done without your videos.
hello balkan,
can you please tell how to get rid of the those dark blue color that came in the rendering?
I keep getting this message ''Can't cut instance(s) of Type 1 out of its host.''. Kindly help. Note: I model in phases and this message keeps appearing when trying to mount the family in my new sealing. tried the existing and same issue. Kindly advise.
same! got frustrated. PLEASE HELP
same :(
hi ...how to Angled wall reveals in revit..is there any way to do it ..i dont wanna do it at wall custom i wanna use the reveal......thank u
i cant extend it, howww? :)
Can't cut instance(s) of Type 1 out of its host.--- I GOT THIS ERROR WHILE PLACING ON CEEILNIG ANY HELP PLEASE
Did you ever get this figured out? I’m having the same problem
@@letapham no....only way if ur looking for render ...make any linear component -vray -emmisive material ....that process which he explained was very lenghty
Hello sir can I ask you a question personally ?
This program looks amazing, is it easy/flexible to use? I have a cheap starter program "Architect 3D ultimate+" and to be honest it is not easy to use, each object/point placement or creation you have to do freehand and has some options for accuracy. Does Revit make that sort of situation any easier? I need to know what I should invest in for the future.
Hi Balcan Architect, nice job! i have a question, why can't i see your REVIT version on top? its shown just 'BALCAN ARCHITECT TUTORIAL'. is there a way to not to show the revit version on top? thanks
I think he hides the version when he is editing the video. He overides the title with the "Balcan Architect Tutorial" text
Do u create every family by your own, or do us websites like bimobjekt and change thr families?
In most cases I build my own 🙂
hi. I can't find the project of this tutorial on your site. can u tell me the name of the fine so a can find it. thank you
Just contact me through my website and I will help you locate it 🙂
Hi milos, I texted you to the facebook messenger about the office buildind section, there are two images, I couldn't do it from here, I hope you can help me with what I ask you there, thanks, have a good one
Just give us the family. I ain’t got time for that lol
You can find it on my Patreon page!
Instance Parameters can't be used in Type Parameter formulas.
Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".Instance Parameters can't be used in Type Parameter formulas.
Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".Instance Parameters can't be used in Type Parameter formulas.
Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".Instance Parameters can't be used in Type Parameter formulas.
Type Parameter "number of points" is driven by Instance Parameter(s): "Light Length".
can we have that family 😅
Those who have dislike don't like your long beard 🤣🤣
mataron a kenny
Nope... as usual you tutorial did not work for me...
Great video. Thank you so much. I've learned a lot about revit from you. Stay bless.