"The sword you built is the closest I have ever seen, to what I believe would be the best, thanks for the reminder, to look forward to the opportunity, to make my own."
Beautiful Job! I honestly believe that this is one of the best quality and well crafted swords I have seen in years and I am including the hundreds of forged in fire television shows I have watched. You are truly on your way to creating a Genuine mark on blacksmithing custom weapons. Keep it up. I'd like to see if you could make something much simpler sometime, but I will ask you about that another time. Nice work! Congratulations
Fine, fine, I’ll finish my sword. The blade’s been sitting outside and rusting. Amazing job, by the way. I’m an American in Russia learning bladesmithing, and it seems I could learn a lot from you. If you make a scabbard, I’d love to see that.
Your heat treating looked good I always temper the metal at 350° for 2 hours then I allow the metal to cool own its own it helps that spring still not to be too hard so it can have some flexibility and it's nowhere near as brittle
Liam, you made a beautiful sword! I am just starting out forging too and have a decent supply of 5160 to work with and hope to make something approaching the level of quality of your sword. I especially appreciate the way you made the pommel, very creative use of a drill press and drill, I will be doing the same thing.
You did a really good job, the sword turned out with a very clean looking finish. You'll have to show us that one if we can make it to the public market next year.
Dude....Broke the tap, what a bummer. I know because the sound is a familiar one to me. Wonder if anyone else caught that? Got to say your work is good, really good. I'm sure you know, that what you made is called a small sword, they have one on Game of Thrones. I like the bees wax thing, leaves a very unique finish. Great job, turn the tap back a little more than you do, you turn it backwards to clear the chip as you cut the threads, you'll feel the chip as you turn the tap backwards and with small taps don't try to go more than a full turn or turn and a half before you clear your chip. The best taps are the cnc taps, they make the ship travel up the tap and come out the top so you don't have to clear the tap. Sorry.....rambling on. Again beautiful sword......
awesome work! hard to believe a leaf spring could ever look so perty. watching you slashing pumpkins i gotta say, try slashing at watermellons from horseback. when you can slice them clean through and leave the upper on the lower, you will be ready to fight the roman republic. well, according to the movie anyway.
Liam you did a great job on the sword, it's beautiful. Why is it no matter how careful you are when you are tapping a hole it snaps off , have had it happen to me on many occasions. Thank you for your videos.
Very nice man! Freaking groovy really, with that light of a blade and the pommel nut size I bet it balances very close to the guard. And it’s a threaded pommel, just in case you need to end them rightly.
The sword is soo beautiful :))) Just some ideas for a new videos..I'd love to see you forge a a woodworking chisel(something like those old 18th century firmer chisels) or some woodworking drill bits (centre bits/spoon bits/augers)... maybe even a bit brace.. :))
i am currently making my second ever forged sword. i finnished the forging a few days ago and i'm trying to find some time to start grinding it. i'm making geralt's V guard, double wolf head pommel silver sword(i don't know its actual name) from the witcher 3 game, so i have a lot of work to do. but it's nice to see someone else also making a sword.
great job. i like how straight grind lines are. but sword came out bit thin. seems like it vibrates too much after cutting into that pumpkin . how thick it is in its thickest part?
It’s a little under 1/4”... it’s not too thin. Swords vibrate when you hit something. Watch some videos of people cutting with historically accurate swords. Lots of flex
I would love to start forging/sword smithing, are most vehicle leaf springs 5160 that you can get from a junk yard? I love functional Greek, Roman, and viking style swords
In theory most older springs are 5160, I haven’t gotten consistent results using leaf spring. The worse issue is with sonetging that gets constantly stressed like a vehicle leaf spring it can have a lot of stress or even fractures in it. New steel isn’t all that expensive, I’d just pick up a known steel in a convenient size. It’ll save you time and work. That being said you can totally make cool things from reclaimed springs and they can be a great way to practice
Very nice Video. Also a good sword/dagger. But I think you could have made the pommel a little bit smaller.....for such a light and relatively short blade you don't want such a massive counter weight, because it drives the balance too far back which leads to a sword that is unable to deliver a powerful cut. Also it makes for an overall heavier sword.
@@LiamJPenn OK. Then I overestimated the size of the pommel. 4" in front of the guard is ideal for this type of blade. And yes, you're right it is more of a thrusting sword. My intention also was to tell you this for a different, future project.
Great sword I loved the whole build until you didn’t pin the handle on but the grip and blade is awesome not saying the handle isn’t just my preference but I love the dark look if has a nice black leather sheath would look nice on it.
If you are gonna make sword just use whatever measurements you want. They are not critical. And I’d love to make a damascus sword if you are paying for it 😂
Was that the sound of taps snapping? Dunno if you've already fixed that problem, but some Tap Magic and a tapping guide should save you some money and frustration.
Don’t know what your soil is like, but I just dug a 3’ hole and dropped my quench tank in it. I got sick of trying to lift blades up over my head and into a tank
Wow awesome sword! I’m brand new to the craft and have obtained a bunch of leaf spring, can’t wait to mess around with it. Can I ask what that tool was you used that fit into the hardy hole?
Amazing work ,I’m interested in purchasing the exact sword from you, if you make commission I’d love to know how much this sword will cost me ,please get back to me ASAP. Thank you
"The sword you built is the closest I have ever seen, to what I believe would be the best, thanks for the reminder, to look forward to the opportunity, to make my own."
great job love the texture and effect you got on the guard and pommel
Excellent work bud. Really crisp hollow grinds.
Thank you!
Oh, great to see you here! Big fan.
@@LiamJPenn can you make the sword of Achilles from the movie Troy
@@chandlersnyder308 That would be a super rad build. I’ll be out of the shop for a while but maybe someday I’ll do something like that 😎
Beautiful Job! I honestly believe that this is one of the best quality and well crafted swords I have seen in years and I am including the hundreds of forged in fire television shows I have watched. You are truly on your way to creating a Genuine mark on blacksmithing custom weapons. Keep it up. I'd like to see if you could make something much simpler sometime, but I will ask you about that another time. Nice work! Congratulations
Great work on the sword. The pumpkins didn't stand a chance
VERY impressive first sword, wow
that heat treat at 2:55 was clean, nice work
Great video. I’m blowing the cobwebs off of
my forges and getting back to work. I’m going to tackle a sword. Thanks for the inspiration.
Awesome!
Wowsers that is awesome and beautiful. Keep up the great craftsmanship and hard work my friend forge on
Thanks
Love it. Your work is awesome. First time
and you nailed it 👏 👌. Thanks for the video
Fine, fine, I’ll finish my sword. The blade’s been sitting outside and rusting. Amazing job, by the way. I’m an American in Russia learning bladesmithing, and it seems I could learn a lot from you. If you make a scabbard, I’d love to see that.
Thank you! I wasn't planning to do a video, but now im thinking i will.
Remarkable sword for your first one! Well done!
Your heat treating looked good I always temper the metal at 350° for 2 hours then I allow the metal to cool own its own it helps that spring still not to be too hard so it can have some flexibility and it's nowhere near as brittle
Congratulations sir! This Is really a nice sword project.
I really like it, it's like some kind of arming sword/smallsword hybrid.
Amazing work Liam. You've become quite the blacksmith recently
Thank you Arthur!
Excellent work Liam!.. looks really good.
Thank you!
Brilliant work Liam! Outstanding effort mate, well done 🔥⚒️👍
Thank you!
Liam, you made a beautiful sword! I am just starting out forging too and have a decent supply of 5160 to work with and hope to make something approaching the level of quality of your sword. I especially appreciate the way you made the pommel, very creative use of a drill press and drill, I will be doing the same thing.
Excellent and neat work
Well done sir!!!
great job young man
That's a very nice sword.
Great job
Thanks
That's an amazing work, the sword you made is simply great
Thank you
When that tap snapped I heard it and just shut my eyes- PTSD is strong 😂 happened the other day.
Looks amazing! 👏🏼 well done :)
Very nice job.
Fantastic work Liam! It turned out great!
Thanks Justin!
You did a really good job, the sword turned out with a very clean looking finish. You'll have to show us that one if we can make it to the public market next year.
Sure thing! Thank you
Awesome work! This was a really cool build.
Thank you!
The intro!!!😂😂 great work man!!! Looks like ya got some snow down there.🔥⚒💪🏻
😂. We had snow anyways. Juneau being Juneau it’s raining now 😬😂🥴
Dude....Broke the tap, what a bummer. I know because the sound is a familiar one to me. Wonder if anyone else caught that? Got to say your work is good, really good. I'm sure you know, that what you made is called a small sword, they have one on Game of Thrones. I like the bees wax thing, leaves a very unique finish. Great job, turn the tap back a little more than you do, you turn it backwards to clear the chip as you cut the threads, you'll feel the chip as you turn the tap backwards and with small taps don't try to go more than a full turn or turn and a half before you clear your chip. The best taps are the cnc taps, they make the ship travel up the tap and come out the top so you don't have to clear the tap. Sorry.....rambling on. Again beautiful sword......
Thank you! This one isn’t quite a smallsword but that is where I drew inspiration from primarily
@@LiamJPenn Well it’s a work of deadly beauty non the less. Again great work.
Ooooooh pretty sword. Nice sword, stay sword! Stay!
Very well done yo👍👍
And your freehand grinding skills are on point to that I say excellent job beautiful sword .
Thank you
Dude, you're rocking it!😲😁👍
Thanks man!
Great job!!!
Great work man.
Thanks
Bro I really like the way u did things.
The way u carved the palmer with the help of just a grinder and driller.
Amazing bro..
Nicely done mate 👌
Thank you
You kill it budy , amazing job :)
awesome work! hard to believe a leaf spring could ever look so perty.
watching you slashing pumpkins i gotta say, try slashing at watermellons from horseback. when you can slice them clean through and leave the upper on the lower, you will be ready to fight the roman republic. well, according to the movie anyway.
Liam you did a great job on the sword, it's beautiful. Why is it no matter how careful you are when you are tapping a hole it snaps off , have had it happen to me on many occasions. Thank you for your videos.
Thank you!
Nice work
Well done bro 👍🏼
Thank you
Very nice man! Freaking groovy really, with that light of a blade and the pommel nut size I bet it balances very close to the guard. And it’s a threaded pommel, just in case you need to end them rightly.
Haha it’s 1.5lbs total, balance is 4” from the guard. Feels great!
The sword is soo beautiful :)))
Just some ideas for a new videos..I'd love to see you forge a a woodworking chisel(something like those old 18th century firmer chisels) or some woodworking drill bits (centre bits/spoon bits/augers)... maybe even a bit brace.. :))
Maybe at some point! Could be cool
Excellent work! It came out great. Good job on the video as well. This was a treat to watch. Keep up the amazing work! 👍
Thank you!
Thats awesome. I love it
I am jealous of your talent
Dude that's awesome! I need to make a sword too now lol. Keep up the awesome work Liam!
Yessss! Do it!
Excellant work.
Thank you
i am currently making my second ever forged sword.
i finnished the forging a few days ago and i'm trying to find some time to start grinding it.
i'm making geralt's V guard, double wolf head pommel silver sword(i don't know its actual name) from the witcher 3 game, so i have a lot of work to do.
but it's nice to see someone else also making a sword.
Awesome
this is very impressive
I saw that tap breaking from a mile away hehe. Maybe cause I’ve done the same thing a few times myself :p impatience gets the best of us
Haha yeah it was bound to happen
Impressive. You've come a long way from when I subscribed to your channel. Keep up the good work.
Thank you!
Just found your channel Liam, it looks great! I'm excited to watch more videos. The sword looks amazing, especially for your first, well done!
Thank you!
Hey great job man, that turned out great!
Thank you!
great job. i like how straight grind lines are. but sword came out bit thin. seems like it vibrates too much after cutting into that pumpkin . how thick it is in its thickest part?
It’s a little under 1/4”... it’s not too thin. Swords vibrate when you hit something. Watch some videos of people cutting with historically accurate swords. Lots of flex
Realy nice.
I would love to start forging/sword smithing, are most vehicle leaf springs 5160 that you can get from a junk yard? I love functional Greek, Roman, and viking style swords
In theory most older springs are 5160, I haven’t gotten consistent results using leaf spring. The worse issue is with sonetging that gets constantly stressed like a vehicle leaf spring it can have a lot of stress or even fractures in it. New steel isn’t all that expensive, I’d just pick up a known steel in a convenient size. It’ll save you time and work. That being said you can totally make cool things from reclaimed springs and they can be a great way to practice
@@LiamJPenn thanks for the advice!
Great work! ⚔️
Thank you!
Just stumbled upon your channel. Great work!
Thank you
Same.
Well done
Thank you
What happens to the guard and the knob?
Very nice Video. Also a good sword/dagger. But I think you could have made the pommel a little bit smaller.....for such a light and relatively short blade you don't want such a massive counter weight, because it drives the balance too far back which leads to a sword that is unable to deliver a powerful cut.
Also it makes for an overall heavier sword.
It’s only 1.5 lbs, balance is 4” from the guard. It feels great. Something like this is more of a thrusting sword anyways.
@@LiamJPenn OK. Then I overestimated the size of the pommel.
4" in front of the guard is ideal for this type of blade.
And yes, you're right it is more of a thrusting sword.
My intention also was to tell you this for a different, future project.
Most impressive
Thank you
very nice!
Liam that sword is as beautiful as it is functional! I really like how you hot fit that guard also. Will you be making a Scabbard?
Thank you! I will make a scabbard, who knows if that will make a video as I have some more interesting things coming up
Nice job,
how do you prevent the blade from rusting
Keep it dry when possible and oil it occasionally
@@LiamJPenn
Thank you
Great sword I loved the whole build until you didn’t pin the handle on but the grip and blade is awesome not saying the handle isn’t just my preference but I love the dark look if has a nice black leather sheath would look nice on it.
epic build man , how'd you temper it please
I stuck it in an oven at 375 degrees f for an hour and a half two times. Nothing to see.
Sweet! That intro was perfect :D
Glad you liked it
Well done, great little sword there. Do you have a web site?
Nice work...share all measurements of sword...and make damascuss sword👍👍👍
If you are gonna make sword just use whatever measurements you want. They are not critical. And I’d love to make a damascus sword if you are paying for it 😂
I ll pay a like...and attention..,👍👍👍🧐
nice sword
Thank you!
Was that the sound of taps snapping? Dunno if you've already fixed that problem, but some Tap Magic and a tapping guide should save you some money and frustration.
Don’t know what your soil is like, but I just dug a 3’ hole and dropped my quench tank in it. I got sick of trying to lift blades up over my head and into a tank
That would be the ideal way to do it, but that’s not a great option for me unfortunately
Wow awesome sword! I’m brand new to the craft and have obtained a bunch of leaf spring, can’t wait to mess around with it. Can I ask what that tool was you used that fit into the hardy hole?
I isolated the tang with my guillotine tool. It’s one I made myself they are very useful
@@LiamJPenn Thanks Liam! I can see the many functions it serves. Keep up the great work!
hello, how do you prevent spring leaf steel from rusting?
Keep it dry and oil it every once in a while. Same as any carbon steel
@@LiamJPenn thanks for answer sir
How do you temper this long blade?
It just barely fit in my oven
Awesome
What does the beeswax do to the metal?
Protects it from rust and gives a nice finish
Amazing work great job could you forge a pipe tomahawk 👍👍👏
It’s on my list!
@@LiamJPenn Nice thank you
That threader really snapped on you lol
Twice actually 🙃
awesome
5160 spring steel is great metal to build swords if don't burn all the carbon out of it by overheating it
Amazing work ,I’m interested in purchasing the exact sword from you, if you make commission I’d love to know how much this sword will cost me ,please get back to me ASAP. Thank you
The one I made in the video is not for sale, but I could make another similar one. Send me an email: seakranger@gmail.com
我认为你锻剑的方法是非常接近中国古代造剑的方法。(I think your method of forging swords is very close to the method of making swords in ancient China. )
If you hadn't stated this was your first sword, there's absolutely no way I'd believe you judging from the finished product.
Thank you
Name of this type sword? plz.
It’s not any specific type. Just what came out of my head
Me like it.
At 7:23 he won the long toss at the hillbilly Olympics.
haha
Floris estés tu(?
👍
You look like John Gray from Outlander
Haha
RIP all the taps though
Yeah... :(
молодец респект тебе
🤙🏽👍🏽👏🏽👏🏽👏🏽👏🏽💞
Братан красавчик, респект и уважуха. Субтитры на русском сделай, пожалуйста?
А то я плохо знаю английский.
You're all that and a super-size bag of chips, want to be youtube friends?
Is it tough enough ? Break it.
No. Why would I break it? This steel with a good heat treat is tough as hell, but feel free to buy one from me if you don’t believe me.