Thank you! You saved me a lot of headache doing this DIY. I soaked the nuts 3 times within an hour using Seafoam Deep Creep. I loosened it until I heard a crack, sprayed more penetrating oil then tightened it again. After that, the nut loosened like butter.
Great video I ordered a can of that oil. My lower bolts are pretty rusty I’m more worried about breaking those that the Upper bolts. Great video tho. For the 4 upper did you just use a breaker bar with an extension or an impact ? Thanks for all your help
@@BCautosolutions got it sir , thank you , soaked all my bolts overnight with the special sauce (Kroil ) and all popped loose with a large break bar tops and bottom. Pipe is on your the man appreciate this video so much !!
Installing an RV6 downpipe on Sunday, I'm dropping car off Saturday night, does the mechanic need to soak the bolts Saturday or can he do it Sunday while car is super cold from sitting over night?? BTW 10th gen Accord touring model
Hey. I have 2020 Accord 2.0 Turbo 6 speed. I want to put a new intercooler, cold intake and downpipe on it. Maybe even a turner. Looking for more horsepower. Can you give me some advice on that? If come to you but I'm in Queens New York.
Bolt buster is an awesome tool and a must have imo and is on my list of tools to get but in this case heating up the nuts doesn’t work (atleast for me it didn’t both times I tried with a torch). I’ve tried multiple methods of removing these nuts and this way my only successful way repeatedly. Thanks for watching and your feedback 👍🏻
Thank you! You saved me a lot of headache doing this DIY. I soaked the nuts 3 times within an hour using Seafoam Deep Creep. I loosened it until I heard a crack, sprayed more penetrating oil then tightened it again. After that, the nut loosened like butter.
Good job, thanks for watching
That penetrating oil is the best. Been using it for years in the aircraft industry. Thanks for sharing and stay well and safe Artie 👍
Yes it really is good stuff, best Ive used but I’m always open to trying new products, tools, ideas. Thanks for watching sir 👍🏻
Have you ever tried a 50/50 mix of Dextol transmission fluid and acetone also works well. Artie 😊
Great video I ordered a can of that oil. My lower bolts are pretty rusty I’m more worried about breaking those that the Upper bolts. Great video tho. For the 4 upper did you just use a breaker bar with an extension or an impact ? Thanks for all your help
Thank you! I use a longer 3/8 ratchet, don’t use anything impact.
@@BCautosolutionsdo you recall what size nuts those 3 are on the bottom of the downpipe ?
@@joerossi4231 14mm heads
@@BCautosolutions got it sir , thank you , soaked all my bolts overnight with the special sauce (Kroil ) and all popped loose with a large break bar tops and bottom. Pipe is on your the man appreciate this video so much !!
@@joerossi4231 thanks for sharing! Congrats
Can you tell me what's the thread pitch, for the manifold bolt and nuts
What part of jersey ?I need a downpipe installed .
Middlesex county if your intrested shoot me an email.
Bcautosolutuons20@gmail.com
Whered you get the plug for the o2 sensor hole
Stainless O2 Sensor Plug M18x1.5mm With Copper Washer - Ticon Industries www.amazon.com/dp/B078NXL1MF/ref=cm_sw_r_cp_api_glt_i_SEN7MHQTXZ55662GDWP0
This video is helped me immensely with my PRL DP install. Good content.
Glad to help. Thanks for watching
Love this kind of content keep it coming 👍👍👍
Thanks will do 👍🏻
Love your work bro! Keep it up!!! 😎
Thank you!
What kind of penetrating oil do you use? Getting ready to do a 2011 6.6 Duramax that is rusted bad.
Kano sili kroil, I’ve added a direct link in the video description. It’s pricey but sure worth the money.
Installing an RV6 downpipe on Sunday, I'm dropping car off Saturday night, does the mechanic need to soak the bolts Saturday or can he do it Sunday while car is super cold from sitting over night?? BTW 10th gen Accord touring model
I would take shields off turbo sat night and soak bolts, then on Sunday before starting to remove the bolts I would once again soak them. Good luck 👍🏻
@@BCautosolutions that is what I will do, thanks again for everything and the advice.
@@stephenrusnell8698 no problem
Way to go g!
Thanks Dude 🙏🏻
Need this done to my accord along with the front pipe … how would I get into contact with you to get this done …. I’m from New Jersey
Bcsutosolutions20@gmail.com
anyone been getting the cel with a p0420 code after installing the catted downpipe and frontpipe?
You can disable the code with Ktuner/Hondata or use a proper defouler as wel
Would this work for the 1.5t?
For sure
How much you charge? For downpipe
Shoot me an email. Bcautosolutions20@gmail.com
Hey. I have 2020 Accord 2.0 Turbo 6 speed. I want to put a new intercooler, cold intake and downpipe on it. Maybe even a turner. Looking for more horsepower. Can you give me some advice on that? If come to you but I'm in Queens New York.
Yes I can do it for you. Shoot me an email: bcautosolutions20@gmail.com
I emailed you. Don't know if you received it or not.
Was there any issue trying to place the oem heat blanket over the dp?
No
Get yourself the BOLTBUSTER I GUARANTEE YOU IT'S WORTH THE MONEY. TIME IS MONEY YOU WILL SAVE A SHIT LOAD OF TIME WITH IT. NICE WORK THOUGH
Bolt buster is an awesome tool and a must have imo and is on my list of tools to get but in this case heating up the nuts doesn’t work (atleast for me it didn’t both times I tried with a torch). I’ve tried multiple methods of removing these nuts and this way my only successful way repeatedly. Thanks for watching and your feedback 👍🏻
Dope!!
Thanks for watching 🙏🏻
Great video!! I just subscribed 👌 Where are you located it?
Thank you and thanks for subbing! I’m in centra/north jersey
Wd 40 works
Not really. I’ve tried it, but if it worked for you 👍🏻👍🏻