Just programed the replacement key I purchased from you. Couldn't believe how easy it was. Before I started I was quite worried but your instructions were clear and concise. Absolutely no problem
Second Tom key that I have purchased and just did this on my dodge charger. Worked perfectly, scroll to like page three for button breakdown. I was confused at first on how the sequence of buttons paired with the key fob. Like three minutes and done!
It's great to hear that the process worked perfectly for you. Thank you so much for sharing your feedback. Just send us an email at help@tomskey.com if you need assistancel
Concerning the emergency key. 2014 Dodge Journey, push button start. Are you able to start the car with that key? Or just open the door. If you can start the car, I have not figured out how/where to expose where to insert it. Thank you.
Your owner manual will show you how to use your fob to start the car if the fib battery is dead. Usually it's holding it up to the start button is putting into a special pocket under a cup holder or in the center console that has a sensor to read the key when it's next to it. The emergency key blade will typically just unlock the door to get you in the car
I bought the key fob programmer and an extra key for a 2012 Dodge Ram. Programming was very easy. I would recommending that you have them cut the key as I am having a very hard time finding someone that can cut the key that goes into the fob.
Thank you for your dropping us this wonderful review. We are so happy to help you through our simple, fast, and easy solution for getting a new key for your vehicle.
Ya, nobody wants to cut the key. Idk what the big deal is. Just seams a jerk move. The locksmith had a digital key cutter and he said it takes a carbide bit. $$$ if it breaks. The machine was a couple hundred too.
I ordered the connector but wanted the oem key with the insignia on it so I ordered one off eBay and it came and is brand new internals and everything matches my key but I can’t get that blue light to come on, I put the battery in my current fob and it worked so I’m just not sure where to go from here aside from just putting my motherboard and everything inside the new housing which sucks cause then I feel I wasted the money on the connector
@@TomsKeyCompany so would i still be able to follow these instructions and it will still work with this device? mines a chrysler 200 so i know the code isnt the 111 code
Hi, if you have a working key that starts your vehicle, we can help you make a spare. If you need further assistance, please email us at help@tomskey.com with your vehicle information so we can give you a more accurate response. Thank you!
Hi there! Yes. We ship to Canada and the USA as a standard. Please send us an email at help@tomskey.com for vehicle verification and whether our products will work out for you.
Hi Joe, you need one working key to make a spare. You need a new programmer for each vehicle. The programmer reads the VIN number and becomes locked to the first vehicle it makes a key for. You can make up to 4 keys for the same vehicle with it.
Hi Olayinka, you need a working key that starts the engine in order to add spare keys. Not sure what video you specifically need but you may reach out to us at help@tomskey.com so we can assist you or visit tomskey.com to check the products. Thank you
I received the 5-button kit. Original fob is 3-button. You mention @0:36 that it doesn't hurt to try the 5-buttons and the trunk should work. However, in the manual you are holding and the one I have in the kit, there is no code listed under "5 button" for the Dodge Journey. So are you saying that using the same 3-button code in the manual (111) that if I have a 5-button fob... the trunk should work ... OR is there another code I need for the 5-button fob that just isn't listed in the manual (e.g. 114 like the Charger shows) ??
Hi Shawn, kindly reach out to us Help@tomskey.com and (801) 877-5752 and tell us about your vehicle info and situation to see if we can help. Customer Service aims to respond within 1 business day M-F. Just a note that only the original vehicle remote functions will work. This product can not add new features to the vehicle.
It works up to 2017 Charger & Challenger. In 2018 Dodge changed the key programming technology and there's not an easy DIY solution... yet. Find the vehicles here: tomskey.com/pages/dodge
Hi Liam! We’d be happy to help you find out if a programmer is needed. You can use Tom's Key Finder on our website at tomskey.com-just enter your vehicle info, and it will guide you to the right option. Please note that to make a spare key, you'll need to have a working key that starts your vehicle. If you prefer, you can also email us your vehicle’s make, model, and year, as well as whether it's a "Push to Start" or turn-key, at help@tomskey.com. Additionally, our chat feature on tomskey.com is available for assistance.
You may visit this link for you 2015 Dodge Durango tomskey.com/collections/dodge-durango-2014-2017-push-button-start You may also send us an email at help@tomskey.com if you need help
All I did was take the key fob apart and took the programmer out of the old key fob and inserted the programmer into the new key fob. Also, bought a brand new key fob from Amazon for less than $10.
Hi there! First, you must have one working key that starts your vehicle to make a spare key. You may then visit tomskey.com/collections/dodge-journey-2011-2017. If you need assistance, send us an email at help@tomskey.com
Hi Nikki, you may check your vehicle here tomskey.com/collections/jeep-grand-cherokee-2008-2013 Reach out to us at help@tomskey.com if you need assistance.
Any idea what it cost to have a new fob made? $500 for the computer to make one key is a bit much for me. I bought a used charger and it only came with one key. The dealer won’t make a second and says they charge too much he doesn’t recommend it. I didn’t think of it before I put the down payment on it. I have a 2018 charger key and the new charger is a 2021.
Hi Rusty, sorry, we don't support your vehicle yet, check with our partner. We have arranged a special discount to have a top quality company help you. Visit this page: bit.ly/TomsKeyPartner You may also send us an email at help@tomskey.com for assistance
Hi Shawn, this just adds a new key. No existing keys get erased. You may contact customer support for help. There’s a phone number in the FAQ section of manual. They can help you solve the problem. Or email help@tomskey.com.
Hi there, it's just that none of the proximity features will work means, that all the key fob's remote buttons will function but not the push-to-start button of the vehicle. The programmed key fob can only start the car manually by removing the start/stop button and under it is the turn-key ignition. For further information/ assistance, please email us at help@tomskey.com.
Hi, sorry, we don’t support your vehicle yet, check with our partner. We have arranged a special discount to have a top quality company help you. Visit this page: bit.ly/TomsKeyPartner
I just ordered one. I have a question though will the programer work with another fob that isn't from your company or does companion fobs have to be all purchased from you?
Yes, you may use any keys you've purchased elsewhere. Just make sure it has the correct FCC ID as your original key. For more information or for assistance reach out to us, help@tomskey.com
Hi there, Thanks for reaching out and for showing interest in our products! Pls. reach out to us at help@tomskey.com and provide vehicle information so we confirm that our programming kit will work on your vehicle. Thank you
Lock Smith came to help me but he couldn't program any key fob I don't understand n he charged me half of money n said he had to come back to redu tomorrow with another program
For a reliable and convenient solution, consider trying Tom's Key Company. Visit tomskey.com. If you have any questions or need assistance, feel free to reach out to us at help@tomskey.com. We're here to help!
Hi Jack, TomsKey.com has many do-it-yourself car key programming solutions including for push-button start vehicles. Visit TomsKey.com to find your vehicle
Hi there, for most vehicles, you’ll need a key programmer to program a new key fob. Without a programmer, you might have "a" key, but not the key for your vehicle. It may unlock the doors, but beyond that, it’s just a shiny accessory that won’t give you full control of your car’s functions. Please email us at help@tomskey.com with your vehicle information so we can provide you with a more specific answer based on your vehicle. Thank you!
No, sorry. To prevent theft you must have one working key. Get one from a dealership or locksmith. If they want to charge too much for the spare, then use our kit to make that.
Hi, once you have identified the right programmer using the vehicle selection tool, you can either rent it or, in the case of Simple Key kits, purchase it for repeated use. Our rental programmers, such as the TSL series for specific makes or the Universal EZ Installer for a broader range of vehicles, come with a fully refundable deposit upon return. You can also use the chat feature on our website if you need further assistance.
Looks like my mouth was moving and brain not thinking. I should have said Lock and Panic. The instruction manual will have that information. Some Toyota vehicle fobs use a sequence pushing Lock and Unlock at the same time. Car manufacturers keep the keys/fobs confusing!
Save hundreds of dollars and hours of time! Order your key today: tomskey.com/?
Just programed the replacement key I purchased from you. Couldn't believe how easy it was. Before I started I was quite worried but your instructions were clear and concise. Absolutely no problem
Awesome!
Just program my remote for my Dodge journey. Everything worked exactly as the video said. You guys are awesome big thumbs up thank you guys.
It's wonderful to hear that you got great service at Tom's Key Company. Thank you so much for trusting us.
Second Tom key that I have purchased and just did this on my dodge charger. Worked perfectly, scroll to like page three for button breakdown. I was confused at first on how the sequence of buttons paired with the key fob. Like three minutes and done!
It's great to hear that the process worked perfectly for you. Thank you so much for sharing your feedback. Just send us an email at help@tomskey.com if you need assistancel
what year? i have a 2014 charger RT im afraid of this site not being fr💀
@@zkl-df4nk2012, ez peasy
Thank you, so easy to do with this video! I was down to one key so was in dire need of a spare.
So glad it was so easy for you to make a spare!
Concerning the emergency key. 2014 Dodge Journey, push button start. Are you able to start the car with that key? Or just open the door. If you can start the car, I have not figured out how/where to expose where to insert it. Thank you.
Your owner manual will show you how to use your fob to start the car if the fib battery is dead. Usually it's holding it up to the start button is putting into a special pocket under a cup holder or in the center console that has a sensor to read the key when it's next to it. The emergency key blade will typically just unlock the door to get you in the car
@@TomsKeyCompany Thank you.
I bought the key fob programmer and an extra key for a 2012 Dodge Ram. Programming was very easy. I would recommending that you have them cut the key as I am having a very hard time finding someone that can cut the key that goes into the fob.
Thank you for your dropping us this wonderful review. We are so happy to help you through our simple, fast, and easy solution for getting a new key for your vehicle.
Ya, nobody wants to cut the key. Idk what the big deal is. Just seams a jerk move. The locksmith had a digital key cutter and he said it takes a carbide bit. $$$ if it breaks. The machine was a couple hundred too.
I ordered the connector but wanted the oem key with the insignia on it so I ordered one off eBay and it came and is brand new internals and everything matches my key but I can’t get that blue light to come on, I put the battery in my current fob and it worked so I’m just not sure where to go from here aside from just putting my motherboard and everything inside the new housing which sucks cause then I feel I wasted the money on the connector
The blue light is only for the special aftermarket key. An OEM key doesn't need the light as long as it's the right key for the vehicle
@@TomsKeyCompany so would i still be able to follow these instructions and it will still work with this device? mines a chrysler 200 so i know the code isnt the 111 code
I have a 2018 journey se with a 3 button fob. Is it possible to know if it has remote start and trunk option?
I was also looking for the 1 with remote start. Notice they never answered your question
Will it work if im having to press the ignition with the key?
New battery, propper battery, the fob is old and beat up so im figuring its a bad fob
Hi, if you have a working key that starts your vehicle, we can help you make a spare.
If you need further assistance, please email us at help@tomskey.com with your vehicle information so we can give you a more accurate response. Thank you!
Question
Is there an option for a dodge dart? 2014 model year
Hi, yes, you may check your vehicle here: tomskey.com/pages/dodge#dart
Hi how much it will b to get a 2017 Dodge journey key fob
Hi, you may check your 2017 Dodge Journey here: tomskey.com/collections/dodge-journey-2011-2017. Thank you
Do the ship to Toronto Canada?
Hi there! Yes. We ship to Canada and the USA as a standard. Please send us an email at help@tomskey.com for vehicle verification and whether our products will work out for you.
Can you this with a used remote? I want to take this remote from a used vehicle and program it for a different vehicle
Hi Joe, you need one working key to make a spare.
You need a new programmer for each vehicle. The programmer reads the VIN number and becomes locked to the first vehicle it makes a key for. You can make up to 4 keys for the same vehicle with it.
@@TomsKeyCompanycan an old key fob that was originally programmed for a different car be re-programmed? Or does it have to be a “blank” key fob?
Great video and well explained. Do you have a video of were the original key is missing?
Hi Olayinka, you need a working key that starts the engine in order to add spare keys. Not sure what video you specifically need but you may reach out to us at help@tomskey.com so we can assist you or visit tomskey.com to check the products. Thank you
I received the 5-button kit. Original fob is 3-button. You mention @0:36 that it doesn't hurt to try the 5-buttons and the trunk should work. However, in the manual you are holding and the one I have in the kit, there is no code listed under "5 button" for the Dodge Journey. So are you saying that using the same 3-button code in the manual (111) that if I have a 5-button fob... the trunk should work ... OR is there another code I need for the 5-button fob that just isn't listed in the manual (e.g. 114 like the Charger shows) ??
Hi Shawn, kindly reach out to us Help@tomskey.com and (801) 877-5752 and tell us about your vehicle info and situation to see if we can help. Customer Service aims to respond within 1 business day M-F.
Just a note that only the original vehicle remote functions will work. This product can not add new features to the vehicle.
Younever answer specific questions on here@@TomsKeyCompany
How to open keyfob to change battery
Will it work for 2015-2018 dodge chargers and challengers
It works up to 2017 Charger & Challenger. In 2018 Dodge changed the key programming technology and there's not an easy DIY solution... yet. Find the vehicles here: tomskey.com/pages/dodge
Will it work for Durango and jeep to
I need another key for my dodge it's mostly broken n I would like a noches set of keys for my car how do I get ahold of ya
Hi there, pls visit tomskey.com to find your vehicle. You may also reach out to us at help@tomskey.com for help
do i need the programmer?
Hi Liam! We’d be happy to help you find out if a programmer is needed. You can use Tom's Key Finder on our website at tomskey.com-just enter your vehicle info, and it will guide you to the right option. Please note that to make a spare key, you'll need to have a working key that starts your vehicle.
If you prefer, you can also email us your vehicle’s make, model, and year, as well as whether it's a "Push to Start" or turn-key, at help@tomskey.com. Additionally, our chat feature on tomskey.com is available for assistance.
Will this work for a 2015 Dodge Durango?
You may visit this link for you 2015 Dodge Durango tomskey.com/collections/dodge-durango-2014-2017-push-button-start
You may also send us an email at help@tomskey.com if you need help
All I did was take the key fob apart and took the programmer out of the old key fob and inserted the programmer into the new key fob. Also, bought a brand new key fob from Amazon for less than $10.
Hi Michael, hope everything works well. if you need assistance send us an email at help@tomskey.com, thanks
Mine is a 2015 Dodge journey so how will I reprogram mine
Hi there! First, you must have one working key that starts your vehicle to make a spare key. You may then visit tomskey.com/collections/dodge-journey-2011-2017. If you need assistance, send us an email at help@tomskey.com
Hi! Great video! Am I able to use that same key fob for my 2012 grand Cherokee?
Hi Nikki, you may check your vehicle here tomskey.com/collections/jeep-grand-cherokee-2008-2013
Reach out to us at help@tomskey.com if you need assistance.
Great thank you
Our pleasure!
Any idea what it cost to have a new fob made? $500 for the computer to make one key is a bit much for me. I bought a used charger and it only came with one key. The dealer won’t make a second and says they charge too much he doesn’t recommend it. I didn’t think of it before I put the down payment on it. I have a 2018 charger key and the new charger is a 2021.
Hi Rusty, sorry, we don't support your vehicle yet, check with our partner. We have arranged a special discount to have a top quality company help you. Visit this page: bit.ly/TomsKeyPartner
You may also send us an email at help@tomskey.com for assistance
If I mess up any steps during the process... does it in ANY way mess up the original (working) key fob?
Hi Shawn, this just adds a new key. No existing keys get erased.
You may contact customer support for help. There’s a phone number in the FAQ section of manual. They can help you solve the problem. Or email help@tomskey.com.
The website says the none of the proximity features work , at least on the Chrysler thing. Is that an error?
Hi there, it's just that none of the proximity features will work means, that all the key fob's remote buttons will function but not the push-to-start button of the vehicle. The programmed key fob can only start the car manually by removing the start/stop button and under it is the turn-key ignition. For further information/ assistance, please email us at help@tomskey.com.
Then why would i buy that?@@TomsKeyCompany
I want a remote for mine… apparently my 2011 ram 2500 4x4 diesel didn’t come with one…
Hi, sorry, we don’t support your vehicle yet, check with our partner. We have arranged a special discount to have a top quality company help you. Visit this page: bit.ly/TomsKeyPartner
I just ordered one. I have a question though will the programer work with another fob that isn't from your company or does companion fobs have to be all purchased from you?
Yes, you may use any keys you've purchased elsewhere. Just make sure it has the correct FCC ID as your original key. For more information or for assistance reach out to us, help@tomskey.com
Do you shipping to new zealand
Hi there, Thanks for reaching out and for showing interest in our products! Pls. reach out to us at help@tomskey.com and provide vehicle information so we confirm that our programming kit will work on your vehicle. Thank you
@@TomsKeyCompany thank you sir i just email you .
Lock Smith came to help me but he couldn't program any key fob I don't understand n he charged me half of money n said he had to come back to redu tomorrow with another program
For a reliable and convenient solution, consider trying Tom's Key Company. Visit tomskey.com. If you have any questions or need assistance, feel free to reach out to us at help@tomskey.com. We're here to help!
How much for this product?
You can find it here: tomskey.com/products/chrysler-dodge-jeep-and-ram-simple-key-programmer-for-smart-key-fob-cdsk-e3z0sk-kit
Save a click it $200 or current sale 113
how do i get a programmer
Hello Lloyd, visit tomskey.com to find your vehicle. All of our Simple Key Programming kits are sold with a programmer and one key or fob.
I bought key fob. Can’t see blue bottom you showed.
Hi, email help@tomskey.com for further assistance. thank you!
brother is nice video where i can buy this tomekey?
TomsKey.com
Why do you guys hold down a PUSH to start lol
I need the one with 4 buttons and auto start. This isn't that 1.
Hi Jack, TomsKey.com has many do-it-yourself car key programming solutions including for push-button start vehicles. Visit TomsKey.com to find your vehicle
copy pasting is never the answer, son. And why are you replying at 1 AM? Are even American?@@TomsKeyCompany
Hey I have a question what if you don’t have a programmer, can you still program the key fob by itself ?
Hi there, for most vehicles, you’ll need a key programmer to program a new key fob. Without a programmer, you might have "a" key, but not the key for your vehicle. It may unlock the doors, but beyond that, it’s just a shiny accessory that won’t give you full control of your car’s functions.
Please email us at help@tomskey.com with your vehicle information so we can provide you with a more specific answer based on your vehicle. Thank you!
Open key fob , change battery
By chance can you do it without the original key ?
No, sorry. To prevent theft you must have one working key. Get one from a dealership or locksmith. If they want to charge too much for the spare, then use our kit to make that.
Why is the site charging me to return it for an extra $64? Sounds like a scam
Hi, once you have identified the right programmer using the vehicle selection tool, you can either rent it or, in the case of Simple Key kits, purchase it for repeated use. Our rental programmers, such as the TSL series for specific makes or the Universal EZ Installer for a broader range of vehicles, come with a fully refundable deposit upon return.
You can also use the chat feature on our website if you need further assistance.
🤠
He said lock and unlock. Script on screen said lock and panic
Looks like my mouth was moving and brain not thinking. I should have said Lock and Panic. The instruction manual will have that information. Some Toyota vehicle fobs use a sequence pushing Lock and Unlock at the same time. Car manufacturers keep the keys/fobs confusing!