I just put mine together yesterday. The hinges are the most difficult part of the install and I would recommend putting the screw into each of the six hinges before placing them on the door. They then snap in place and the screw is used to tighten the grip of the metal hinge around the plastic corner.
I installed mine today and found that pulling the door completely inward helped them snap on. I also had trouble with the roof hinges since my shed is up against a building.
I'm having trouble with the roof attach - the hinges don't want to 'click' into the sockets in the roof panel. The roof just squishes up and doesn't bite on the hinge pieces. I'm not sure how to make it work - any hints?
Yep the hinges are not thought out very well ..... You should tap the hinges to make sure the screws are going to fit properly after the base and shed are assembled ..... you will need two more hours dealing with the defective hinges
We just purchased this, would you say a normal push mower would fit inside? Before we assemble, I wanted your opinion. We purchased it for that main reason and now I’m not so sure it will fit. :-)
I wanted to tell u thank u this video was informative, but I must ask some parts of it u didn't quite explain by the video what u were doing like the latching of the doors with the screw and securing the roof please explain thank u
I just spent all day on this unit and Nothing lined up. Even the latch on the bottom didn't fit through the slot. Thanks for the video. I bought 3 of these and i want to return them. You skipped the part showing those little 'hooky' looking things that come in the box.
great job. i was able to assemble 95% of this without referring to the instruction based on your video. the roof step was quite easy after i retrieved a step stool. the side hinge locking screws were so poorly designed i used next size smaller diameter screws from my coffee can. i am very pleased with the shed after one day. thank you for the entertaining an informative assembly video!
No way it will fit in an SUV. I rented a van from Home Depot for $20.....very easy to load because of the low floor level. Pickup would work though load height is much higher and its a heavy box. About 175 pounds, I think.
No way it will fit in an SUV. I rented a van from Home Depot for $20.....very easy to load because of the low floor level. Pickup would work though load height is much higher and its a heavy box. About 175 pounds, I think.
Disagree because it’s good to film unpacking in case you did not get what you were supposed to. What better proof than a vid with multiple views on RUclips!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I just put mine together yesterday. The hinges are the most difficult part of the install and I would recommend putting the screw into each of the six hinges before placing them on the door. They then snap in place and the screw is used to tighten the grip of the metal hinge around the plastic corner.
Great suggestion.
2008418lifetime shed assembly
How? Isnt it impossible to put the door on after
I installed mine today and found that pulling the door completely inward helped them snap on. I also had trouble with the roof hinges since my shed is up against a building.
Just got this today. Good video to watch to get a idea what to look for during assembly.
We really like it. It’s a great little building. Thank you for watching.
@@ourforeverfarmYou're welcome. I got this for my wife to put her home decor in and I can finally get my garage back.😁
That’s great!! I think I’m taking over our garage too!! Lol.
He’s a natural...and a comedian!
One of a kind. That’s for sure.
Just my Daddy ! Lol. He call them Destructions - when you destroy it read the INstructions !
How did you attach the roof, my hinges did not click and did not attach at all
It took a little work but they just snap in place. It took 2 of us. Thx for watching.
I'm having trouble with the roof attach - the hinges don't want to 'click' into the sockets in the roof panel. The roof just squishes up and doesn't bite on the hinge pieces. I'm not sure how to make it work - any hints?
Yep the hinges are not thought out very well ..... You should tap the hinges to make sure the screws are going to fit properly after the base and shed are assembled ..... you will need two more hours dealing with the defective hinges
Yep we ran into the same problem. Annoying, but we love the shed now that it is done.
Yes this is a good shed for the most part I agree 😎
Thank you for watching and for tip.
Thanks for watching.
Thank you for watching.
We just purchased this, would you say a normal push mower would fit inside? Before we assemble, I wanted your opinion. We purchased it for that main reason and now I’m not so sure it will fit. :-)
Yes.
That looks very easy! I’m loving the outdoor kitchen!
I love it too!!
Thank you guys
Thank you!!!!!!
I wanted to tell u thank u this video was informative, but I must ask some parts of it u didn't quite explain by the video what u were doing like the latching of the doors with the screw and securing the roof please explain thank u
Thanks for the feedback. I’ll provide more detail on my next one.
yes
Thank you for watching!
Thank you!!
You're welcome! Thx for watching!
I just spent all day on this unit and Nothing lined up. Even the latch on the bottom didn't fit through the slot. Thanks for the video. I bought 3 of these and i want to return them. You skipped the part showing those little 'hooky' looking things that come in the box.
Oh I’m so sorry it didn’t work out. But thx for watching.
@@ourforeverfarm Thank you for your reply. I sent them all back.
@@Tengobaila3They are flimsy and will not last for me, taking it back rn!
@@aarongarcia1101 Great! I bought a huge one and hired someone to put it together!
This video actually helped a lot. Thanks!
Great to hear.
Sure would have been helpful if you showed how you installed the roof
We are so sorry!! Next time we will make sure and pay close attention to the details for the viewers.
Exactly
great job. i was able to assemble 95% of this without referring to the instruction based on your video. the roof step was quite easy after i retrieved a step stool. the side hinge locking screws were so poorly designed i used next size smaller diameter screws from my coffee can. i am very pleased with the shed after one day. thank you for the entertaining an informative assembly video!
Love the shed!!!! Going to be so useful!!
Naomi Magee Yes!!! I think so!
Is the shed waterproof? Does it leaks when raining?
Yes. It’s waterproof. It’s great.
Awesome! That will come in handy
JS adventures Yes!!! Thanks for watching.
Looks pretty easy!!
Mandy S He makes it look easy. I’m reading directions though.
Lol
He didn't act too excited about those instructions!!😁
I just now built one.
The hinges were a pain In the butt!!!!
Yes they were. I hope you enjoy yours as much as we have ours. Thanks for watching.
Is it easy to topple over?
We have not had an issue. Hopefully you won’t. Have a wonderful day.
What price is this shed?
Great question!! We are thinking 329!
wondering if itll fit in a suv, depot charging me for $55 for shipping.
It’s pretty big. I doubt it. It comes in a box.
Yes it does.
No way it will fit in an SUV. I rented a van from Home Depot for $20.....very easy to load because of the low floor level. Pickup would work though load height is much higher and its a heavy box. About 175 pounds, I think.
No way it will fit in an SUV. I rented a van from Home Depot for $20.....very easy to load because of the low floor level. Pickup would work though load height is much higher and its a heavy box. About 175 pounds, I think.
I was able to fit it in a forester, front seats need to go all the forward.
how big is this shed?
It is a 2 ft x 4 ft building. Suncaster vertical building found at Home Depot.
@@ourforeverfarm thank you! Just put up my 4x6 and this was really helpful!
You skipped just about every meaningful step
Thank you for your feedback.
Throw away the instructions then ask your wife how to assemble lol
😂
Like 👍🏼 that’s manual to trash jjjjjjjjjj
:)
PLEASE, NO ONE cares about unboxing and explaining parts Just get to how to install
this videos unwatchable
Thanks for the feedback.
I appreciate your honesty.
Disagree because it’s good to film unpacking in case you did not get what you were supposed to. What better proof than a vid with multiple views on RUclips!