Genious Ideas! Pour Super Glue onto Styrofoam and Amaze With Results
HTML-код
- Опубликовано: 28 июл 2023
- Hello everyone! You are watching video "Few People Know This Styrofoam SECRET ! Genious Ideas"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diyprojects #tipsandtricks #recyclediy #superglue #styrofoam - Хобби
Bonjour,
Encore une vidéo GÉNIALE ! !
Merci pour tous tes partages.
👍👏
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Show 👏🏽👏🏽👏🏽, parabéns amigo, Acaraú-Ceará Brasil
That was great -- some repairs I never even imagined!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
In #5, he has just made model airplane cement, ideal for for gluing together injection molded polystyrene kits in the 1960s. My mom made her own by dissolving the first insulated foam cups in acetone. Slightly later, one of Dad's employees at his gas station filled up one of the çups with gas to wash parts in, only to see it disintegrating in his hands before he had taken 2 steps! Dad used the gasoline and styrofoam mixture for sealing tubing, etc. 35 cents for a gallon of gas was much cheaper than 50 cents for a pint of acetone,
Been using white gas to melt styrofoam if one likes a little more body to their adhesive simply add some silicone. I use white gas as it's a lot cheaper then acetone and definitely is cheaper than that high-dollar super glue.If using store bought adhesives on some of my big diorama projects would have a astronomical cost. And this homemade formula outperforms many of the store-bought brands anyway..
Hello! thanks for your recommendation. Wish you all the best!
did not know that cavemen, with their gallons and pints, were capable of primitive inventions.
Hola! Quisiera saber si cuando dice "gas", y cuando otro señor dice "white gas", se refiere a lo que en Argentina conocemos como gasoil, o se refiere a la lo que conocemos como nafta. ¡Alguien sabe la respuesta?
(Hello! I would like to know if when he says "gas", and when another man says "white gas", he refers to what in Argentina we know as diesel, or he refers to what we know as naphtha. Does anyone know the answer?)
¡Gracias!
@@pedrosvaldofrias It was leaded regular gasoline. Probably not the best choice for a solvent/degreaser, but in those days, nobody really cared about it.
I am Dr.Narendra Shah from Gujarat - India. I saw your three videos of how to repair various objects using Super Glue and sand , cement, ash and thermocol. All are very impressive and useful in day to day life. Today I have repaired plastic bucket using Super glue and ash. Thank you so much for perfect demonstration.
Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!
I am Doug from Michigan, USA. Thank you. You are very skilled. I am learning so much from you! THANK YOU!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Bro.try petrol instead of this super glue...SAM
These ideas are so interesting! Thank you Kim from Florida, USA
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
I loved your video, thanks for sharing! Suzie from Brazil 😀
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
do you have a cross tattoo, darling?
There are many uses that I did not know before. Thank you
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
항상놀라운 영상을 만들어주셔서 고마워요
Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!
Gracias x su información que nos puede ayudar de mucho gracias buen día
Usefull Video. Thank You very much. Weiss from Brasil.
You should mention that a lot of these methods release poisonous and/or flammable (possibly explosive) fumes. Also, for the last example, try using a piece of a coffee filter instead of cutting up a facemask. Some cheap disposable coffee filters are extremely strong and make excellent roving or gluing substrate.
Hello! thanks for your recommendation. Wish you all the best!
Thật tuyệt vời với những ý tưởng của bạn. Rất cảm ơn vì những videos thú vị.❤từ Việt Nam.
Bravo pour ces astuces particulièrement celle de l'acetone et du polystyrène car je crois qu'on en a besoin presque quotidiennement 😊😊
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Excelente. Muchas gracias.
Welcome to Creation Holic channel! Thank you so much for your support
Felicidades desde España ❤..un abrazo Grande Gracias
Hello. Welcome to my channel. Thank you for your feedback!
Adorei. Excelentes dicas. Tupiara-Rj
Welcome to Creation Holic channel! Thank you so much for your support
本気の有料級の動画でした!発泡スチロールのポテンシャルを今まで微塵も知りませんでした!今度、発泡スチロール取って置きます。ありがとうございます。
I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share
Good & easy idea.👌👌
Thanks a lot 😊
Greatings from Brazil, amazing tip!
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Wow, I’ve used styrofoam and acetone mixtures for a Sterno fuel substitute but I had no idea that it would be able to do the things you showed here.
Welcome to Creation Holic channel! Thank you so much for your comment! Please feed back to me after you try it. have a nice day!
Exllent ideas very useful for repairing some tools of home home
Glad you liked it
¡Excelente! Muchísimas gracias , idea muy interesante y práctica que usaré en la tapa de un recipiente que te rajó 🎉👏👍🇨🇴☕☕✨🧘✨👌
Welcome to Creation Holic channel! Thank you so much for your support
@@creationholic101 thanks 🗨️ 🙌✨💡✨
great, it's helpful for me
Hello. Thanks for your positive feedback. Wish you all the best
Hola soy de Chile. Me parece muy interesante. No lo he probado pero lo haré. gracias
Hello. Welcome to my channel. Thank you for your feedback!
The last object that you repair looks like a piece of roof plaque made of asbestos mixture with cement. Please be very careful not to breathe dust that comes from this type of material when breaking or worn out.
Hello! thanks for your comment. Wish you all the best!
Dobrý nápad.👍 Jsem z Czech
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Thank you so much ❤❤❤❤
Welcome to Creation Holic channel! Thank you so much for your support
Rio de Janeiro, Brazil. Thanks for your shares!
Thanks for watching!
Hello from Finlandia. Thank for you nice videos.
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
What is happening here is a process called Chemical Welding.
Thank you for sharing your feedback and expressing your perspective
Very good and good idea 👍
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Nice work.
Thank you! Cheers!
Çok güzel bir tarif. Teşekkür ederim.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
good idea 👍👍👍
Many many thanks
Vc conhece o Metjil Etil Metacrilato ?
É o líquido q os dentistas usam pra fazer dentaduras de acriloco ,ele disolve quase todos os tipos de plásticos inclusive o PVC dos tubos marrons de água
Faz uma soldagem perfeita entre plasticos compativeis
Compre o em lojas de produtos dentários junto com o pó de acrílico polimerizavel e vc soldará estes plásticos como novos
Mas gostei da dica com isopor pra consertos de plasticos q não responde ao Metil Etil Metacrilato
😊😊😊😊😊
Hello! Welcome to Creation Holic channel! Wish you have fun watching the video! You are so kind to leave me a comment! If you have a good and useful ideas, please share with me! Wishing you all good things!
Pero debe salir una fortuna el Metjil Etil Metacrilato,ya que las prótesis son costísimas
@@zulmapaz3798
Comprei 100 ml por +- 10 dólares aqui no Rio de Janeiro
@@zulmapaz37985tr
TNK YOU ! VY GOOD IDEA !!! .Ro
So nice of you
gracias buenas noches , yo soy de Colombia, he visto algunos videos y me parecen muy interesantes, siga así gracias.
,
Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
So.sweet
Thanks for your "version" :-) : Around 2:00 Wood glue costs less than superglue and is strong enough. Also, for cracks in plastic (not holes), after having slightly sand and clean the fissure, I use the superglue and add baking soda over it, instead of styrofoam: I find it to be less messy and super solid, at least more than the original plastic/acrylic (stick a tape on the other side to avoid leaks. Then repeat the whole process on that other side). If necessary, you can finish with sand paper to make it even with the required shape. I LUV those tweaks and tricks! Subscribed, and MERCI!
Thanks for your comment
Thanhks you 🌹👍💝👍
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Tebrikler 👏👏👏
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Very useful สุดยอด
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Outro execelente video....Brasil 🎉😊
Hello. Thanks for your positive feedback. Wish you all the best
좋네요
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
فكره جيده
Thanks I like
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Bitte Schutzbrille! Klebt sehr geil❤
Good..
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Olá saudações desde Americana Sp Brasil🇧🇷
Welcome to Creation Holic channel! Thank you so much for your support
Thanks, wonderful idea(s) ! What is the ratio of acetone to styrofoam for best results? (I'd imagine too thick = dries too fast, too thin = never really dries/cures strongly) ... ?
Thx from Detroit metro...
Welcome to Creation Holic channel! Thanks so much for watching our video. I haven't tested the temperature yet. However, I am pretty sure that it can withstand very high temperature. You can use hot glue to replace the candle
@@creationholic101 ? - Whoops, I believe you're answering a different question here... ?
Je connais cette super colle, je n'ais pas encore essayer de l'utiliser avec du polystyrène, mais une précaution à prendre avec ce produit : éviter de s'en mettre sur les doigts et de les rapprocher l'un de l'autre, la prise est immédiate et pour les séparer , c'est laborieux !!! Le scalpel médical est parfois le seul outil efficace !!!!!
Soaking in acetone (nail polish remover) for a couple minutes works wonders on glued skin, completely dissolves it (I'm sloppy, lol, happens to me alllllll the time)...
Welcome to Creation Holic channel! Thank you so much for your comment! beside acetone, you also can soak into salt water to remove super glue from your skin. Wish you all have a nice day!
@@creationholic101•●□□
Money saver tips
Halo.. Saya Dari Indonesia 🇲🇨😁
Welcome to Creation Holic channel! Thank you so much for your support
muy buen video, solo una pregunta, si sobra el preparado hay forma de guardarlo o se desecha el lo que sobro, gracias
When I close it tightly, it can be stored for 1 week with a mixture of foam and acetone
Кто то,не давно,показывал эксперименты с орг.стеклом и ацетоном.Понравилось их прочность(смеси)-но кинулся и кусочка орг.стекла не нашел(а лет 20валом обломков валялось).Увидел у Вас,с пенопластом и будем пробовать...😊
Thank you for your comment. Wish you have a nice day!
重曹と接着剤も感動しましたが、発砲スチロールと接着剤の組み合わせも感動。修繕に最高。
Thank you for sharing your feedback and expressing your perspective
Türkiye...Thank you......
Welcome to Creation Holic channel! Hope you have a good time while watching the video
私は日本人🇯🇵です!日本の京都に住んでいます。とても楽しい動画です!!
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
굳 접착제
Welcome to Creation Holic channel! Hope you have a good time while watching the video
La última reparación que hace es sobre uralita, material peligroso, no se debe manipular.😊
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
Hola soy de Chile
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
👍👍👍
🍀☘☘😘😘😘😚😚😚
J'ai mélange de la bicarbonate avec crayon noir c'est super
Thank you so much for your feedback! Wishing you health and happiness always!
Tony from England
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Biliyordum ama sizde de görünce emin oldum. Teşekkürler..
Welcome to my channel! Thanks for your comment. I'll improve next time. Wish you have a nice day
رائع..رجائي ان تنشر عن صب التروس والمواد المستخدمة بالعربي لان تختلف المسميات بين البلدان..وشكرا لك تحياتي👍
❗Please enable subtitles in your language 🙋🏼♀ Thanks for watching 😋🤗😘
الجزاءير شكرآ على المعلومات
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Se puede hechar en los suelos de las azoteas y en las paredes de cemento gracias desde 🇪🇸
Welcome to Creation Holic channel! Thank you so much for your comment! have a nice day!
after you mix the Styrofoam with acetone and get it liquid, how long it take to dry and how much time i can work with before drying? thank you, you a very cool videos
You should wait until the next day for best results
Merhabalar, videoların çok keyifli. Bu arada ben Türküm, Türkiye’de yaşıyorum. Sanırım bu tarz yapıştırıcılarla polyester- fiber tekne tamirleri de mümkün. Fırsat bulduğumda deneme şansım olabilir. Ben cam elyafı ve fiber macunu ile(3 lü karışım) yapmaktayım ama bu çok pratik, büyük yerler için belki olmayabilir ama ufak yerler için olur kanaatindeyim, başarılar 🙏👏🙋♂️🧿
Hello and thank you so much for your comment! What you say is very true! If you have any other ideas or solutions, feel free to share them with me! Wish you the best!
very good ❤❤❤
g6v6v5v5v6
Welcome to Creation Holic channel! Thank you so much for your support
Kanka yine güzel bir video, yine harika fikirler. Fakat şöyle bir sıkıntı var. Ben bazen japon yapıştırıcısı kullandığım zaman elimde kalıyor ve bıçakla kazımak zorunda kalıyorum. Acaba senin bildiğin taktik var mı?
Cabuk davranırsan tiner yada gaz yağı çıkartıyor.
I ussually put some soap or vinegar in warm water. then I soak my hand for few minutes. By this way, I can easily remove the super glue.
@@creationholic101 ? That doesn't work for me very well, but what DOES work perfectly every time is soaking in acetone (nail polish remover) for 2-3 minutes, completely dissolves it all, very easy/thorough...
@@creationholic101iug
What is the drying time for the adhesive made of acetone and styrofoam?
I too would like to know, both the drying time once applied, and before application how long the mixture will last before hardening (And can it be stored? Or is it like epoxy, once mixed you must use it immediately?)
Mmmmh, good question...
Maybe, after making the solution, in a closed glass little airproof sealed vase and some little extra acetone could last a lot. Or, at least, You can see if the extra acetone evaporates. Anyway I would keep it in a ventilated room far from breathing risk.
Hello. Thanks you for watching my video. As I have tested, if you store the solution in a closed glass, It could last for about 1 week. Drying time once applied is about few hours, I usually leave it overnight.
@@creationholic101hhh
Awesome video content...more please!
The main reason I commented is that corrogated material looks like Transite(tm)... aka pressed asbestos fibre! It was a popular product in the 60's here in the states for awnings and such...before it was outlawed....Please check it and if so dont cut, scrape, break etc (anything that will create air borne dust or fibres) and dispose of according to your country's guielines.
Also cigetette filters may work as a similar adheisive as well.
Regards.
Hello, you are such a nice person to have left me a comment! With a dream to contribute to making the world a better place, I really need good and useful ideas and solutions! If you have any other great ideas please share with me! Together we will make this world a better place! Wishing you good health, success and happiness! Thank you very much!
I was about to say the same. Looks like a peice of asbestos cement roofing sheet.
Bayburt 🇹🇷
👏👏
Thanks so much for watching our video. Wish you all the best
多くの接着剤や充填剤はアクリルなどのプラスチックを溶剤で溶かしたものだからスチロールでも同じことができるんですね。素晴らしい提案と実例でした。
Thanks a lot 😍
España
Keo gì vậy bạn,có thể sử dụng kéo 502 đc ko
Yes !
You can also use petrol instead of super glue...
Thank you! Cheers!
can you still microwave the container ?
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Este pegamento en el porta comida no perjudica la salud?
La acetona no la venden en Barranquilla
To avoid danger, you should use it for other tasks
🙏
Welcome to Creation Holic channel! Hope you have a good time while watching the video
sou do Brasil estado são paulo
Welcome to Creation Holic channel! Hope you have a good time while watching the video
Como es el nombre que ese super pegamento ??
Saludos desde Ecuador
cyanoacrylate adhesive glue
Acetone and styrofoam are basically epoxy? Have you tried tinting and pouring it?
Acetone and styrofoam is napalm! Made using gasoline it was what America used during the Vietnam war
I might try epoxy later. Thanks for your suggestion
Yes. You are right. I’ve search for the information about Viet Nam war. Thanks a lot
@@bernardfender5147 amazzing. what is the aprox drying time ?
@@pdhana69 hello my friend, no drying time, napalm is a liquid. You dissolve enough Styrofoam to make a thick gel
Franchement étonné avec un rien reparti pour des mois d utilisation BELGIUM Belgique en Français
Thank you for your comment. Wish you have a nice day!
Acetone with Styrofoam seems to be a very strong glue, my question is, can I make it and keep it in a glass bottle with a lid?
It only lasts for a short time
@@creationholic101 thank you for your answer
Negeri Terengganu Malaysia
Tôi ở TT Huế
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Dur comme elle devient en séchant la super glue, t'as pas fini de poncer ! En fait pour qu'elle ne soit pas cassante en torsion il faut lui rajouter quelque chose (charbon, bicarbonate ou fondre du polystyrène par exemple) car elle tient en traction mais mal en torsion !
Thank you for sharing your feedback and expressing your perspective
What is a substitute you can buy in bigger volume has a solvent other than Super Glue
cyanoacrylate adhesive glue
日本です。
Welcome to Creation Holic channel! Thank you so much for your support
WALES , THE LAND OF THE WELSH DRAGON. 👍
Welcome to Creation Holic channel! Hope you have a good time while watching the video
TÜRKİYE LİYİM BİLGİ İÇİN TEŞEKKÜRLER.
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
耐熱はどうなんですか?
Indeed, and vibration, and using it on different plastics/materials, and resistance to water/alcohol/cleaners/etc... ?
I have not done in-depth research on this issue. If you have any in-depth research on this issue, please let me know
The styrofoam just thickens it? It seems the black plastic thing would have been better off with just the glue on the contacting surface.
Thank you for sharing your feedback and expressing your perspective
jestem z Polski
"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!
"
Au prix ou est la super glue... 😮 il faut vraiment être économe.
Some one mentioned that carpenter glue works as well and is cheaper
In my country, a bottle costs $0.50, make sure it is "cyanoacrylate adhesive glue"