I got lucky and purchased one at a thrift store for under $20. A steal! I made sure it worked before purchasing. Most stores will let you plug the appliances in to check. The kettle was very dirty. I cleaned it by putting water in the kettle and running it. It took several rounds to get it clean. But it has been well worth the effort. As it came with no instructions videos such as yours have been very helpful. Now our family enjoys amazing popcorn.
Nice viddo. I have the same machine. I wonder is keaving the popcorn under the light would crisp up the popcorn. Mybfresh popcorn was not very crisp. Any tips?
I have a friend who uses the same machine and said that leaving it under the light, helped it to stay fresher longer. I haven't personally tried it yet.
Also how would you add more flavor? I have Kernel season’s movie theater Oil. Smells like movie theater butter. I’d like to add more flavor so do I just add a little more oil when it’s cooking?
how do you attack the kettle because I’m having trouble lining up the gears between the pot and ceiling. Did you have issues with this? If so, how did you guys line it up because I’m having trouble and every time I line it up the thing pops off when I’m attaching the kettle to the hooks
I had my daughter help the first time, as it's tricky to get it lined up. I put the kettle at a tilt to just put the kettle bolts (hooks) in place and then as it was tipped up right again, it fit into the gears. Hope this helps.
@@KeriPratt I figured it out, but the problem is where the groove on the kettle is supposed to go on the top. It’s not Really visible if you know what I mean. I had to buy a replacement kettle because the one they gave me is heating up too fast and I can’t unscrew the lid to get to the temperature thermometer to adjust the time for it to take warm-up. The kettle has been getting hot and very quickly like it only takes one minute and it begins to steam. I read the instructions manual and it says it’s supposed to take up to 3 to 4 minutes to warm up and about 2 to 4 minutes to pop everything so about eight minutes in total I contacted them and they sent me the instructions on how to get to the thermostat, but the problem is the screw is very welded tight to the kettle where I can’t unscrew it. So they sent me another kettle
'how well it was packaged' what is wrong with you LADY!!! its NOT packed well, there is that CRAPPY worthless white Styrofoam , look at the broken pieces of white styrofoam, these manufactures SUCK and are to blame for alot of damage of products that is shipped in the shipping industry!
Use Snapy Buter Burst popcorn oil in both the kettle for popping and for a topping along with the Flavorcal Salt. Then you will have movie popcorn
Thanks for the suggestion!
I'll reuse the unpopped kernel
I got lucky and purchased one at a thrift store for under $20. A steal! I made sure it worked before purchasing. Most stores will let you plug the appliances in to check. The kettle was very dirty. I cleaned it by putting water in the kettle and running it. It took several rounds to get it clean. But it has been well worth the effort. As it came with no instructions videos such as yours have been very helpful. Now our family enjoys amazing popcorn.
I always love getting a great deal! Congratulations on that & enjoy the popcorn!
Mine comes Thursday I’m so excited
Hablo español y me costo trabajo encontrar información. Lo compre por Amazon y el instructivo lo encontré confuso. Amiga, me has salvado la vida
Thank you for your kind words.
Nice viddo. I have the same machine. I wonder is keaving the popcorn under the light would crisp up the popcorn. Mybfresh popcorn was not very crisp. Any tips?
I have a friend who uses the same machine and said that leaving it under the light, helped it to stay fresher longer. I haven't personally tried it yet.
Add some small Pinewood Derby weights to the tops of your lids. May keep them down a bit better without preventing the popcorn from coming out.
Great idea!
Also how would you add more flavor? I have Kernel season’s movie theater Oil. Smells like movie theater butter. I’d like to add more flavor so do I just add a little more oil when it’s cooking?
I add Gold Medal 2045 Flavacol Seasoning Popcorn Salt amzn.to/4fhOieT to add more flavour to my popcorn.
Good job thank you
Thanks for watching ❤️
Does the air get greasy like when deep frying stuff in a kitchen?
I find the air doesn't get greasy, as I try to keep the doors mostly closed while it's popping.
how do you attack the kettle because I’m having trouble lining up the gears between the pot and ceiling. Did you have issues with this? If so, how did you guys line it up because I’m having trouble and every time I line it up the thing pops off when I’m attaching the kettle to the hooks
I had my daughter help the first time, as it's tricky to get it lined up. I put the kettle at a tilt to just put the kettle bolts (hooks) in place and then as it was tipped up right again, it fit into the gears. Hope this helps.
@@KeriPratt I figured it out, but the problem is where the groove on the kettle is supposed to go on the top. It’s not Really visible if you know what I mean. I had to buy a replacement kettle because the one they gave me is heating up too fast and I can’t unscrew the lid to get to the temperature thermometer to adjust the time for it to take warm-up. The kettle has been getting hot and very quickly like it only takes one minute and it begins to steam. I read the instructions manual and it says it’s supposed to take up to 3 to 4 minutes to warm up and about 2 to 4 minutes to pop everything so about eight minutes in total
I contacted them and they sent me the instructions on how to get to the thermostat, but the problem is the screw is very welded tight to the kettle where I can’t unscrew it. So they sent me another kettle
@@johnturcsik2906 that’s frustrating when things don’t work like their supposed to. I’m happy to hear that their customer service is helping though.
You are supposed t put the flavecal right after the kernels
The kettle lids are suposto open and let the popped popcorn fall off in to the bottom
Butter
Put the back of the kettle in first.
Yes, I figured that out! 😉
The price of machine
Cost $ 296.69
www.amazon.ca/gp/product/B000QWE6S4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Home depot has it for 200$
'how well it was packaged' what is wrong with you LADY!!! its NOT packed well, there is that CRAPPY worthless white Styrofoam , look at the broken pieces of white styrofoam, these manufactures SUCK and are to blame for alot of damage of products that is shipped in the shipping industry!