5 or 6 days ago I got my very first AR-10 / AR-308. BC 10. Beautiful heavy 20-in 416SS. I now have in the area of 400 rounds down range. And I have not had a single issue whatsoever. Not even the slightest hiccup. I have fired various brands and weights of .308 ammo through it and it is incredibly accurate and very very reliable. And for 565.00 DELIVERED.... Hell you can't go wrong there. All I did was put a carry handle rear sight on to it a flip up front sight a sling and when I got it I took it apart cleaned it lubricated it fully assembled it sat there and worked the action for like 40 minutes or so... .. and then I tore it down again cleaned and lubricated it once more and then I took it out. I'm a little late to the party with this particular post on this thread...... But I'm telling you are reading this that you can't go wrong with a BCA No matter what some of the haters will say. You know they told me.. don't bother with Palmetto state. They're nothing but garbage. Will I have a few AR-15s from PSA and every one of them is incredibly accurate and reliable. Thousands upon thousands of rounds through all of them... No problems. I truly believe it's all about how you maintenance and maintain your weaponry. If you neglect it........ Well it's not going to work for you. You can't blame a brand for your own mistakes. Keep up the excellent work! I will definitely be a repeat customer.
Just Like others in the reviews I too received a upper with a jammed up upper receiver plug...over tighted and cross threaded , also my bolt carrier is damaged and I have scaring up and down the hand rail. My upper came loose in a box with zero packaging besides some wrap around the barrel. This was my second purchase and the first purchase came packaged perfectly but then when I buy a nicer upper it comes like this. What the heck bear creek. Please get back to me asap and make this right or I'm just going to call my bank and dispute the charge and get the payment reversed . Also ordered a mlock stap mount that wasn't in the box either. I recorded the unboxing so I'll be uploading that to RUclips if you'd like to see it.
I love BCA, I just purchased my 4th barrel/upper from them for my Christmas present to myself. Bca puts out a good product at half the price some of the big name brands sell for. The big name brands might be slightly better quality but not worth twice the price and most of the time Bca uppers shoot just as good if not better than the big name brands. Take it from me, bca does the same job and most times are just as accurate or better for less cost.
Thank uou my .308 is in transit to me, my 5.56 both give better than 1 moa and i haven't even tried your reccommended ammo yet. I am very pleased. Shot groups using brar creek scopes as well
Will this fit the Utas AR10 lower? It’s the Turkish AR12ga, it says a DPMS upper will fit it just fine but idk anything about AR15s that arnt 5.56 or 223. Any feed back would be appreciated
Im just going to make an observation here, I see many people have asked about lowers and which ones to use or is best to use with yalls AR10 uppers and other than a comment regarding PSA and how your uppers have different tolerances than the PSA lowers do and could cause reliability issues i have seen no other answers to peoples questions. I think yall have great products even though yall are priced toward a budget platform build the units i have built from your complete upper assemblies have worked out quite well however yall need to work on your answers to folks with the questions that customer service goes a long way to helping people see the value in your company and product. What we as a customer needs to know especially for the first time builder as many are, We need to know which product works well with others, If yall arent going to stock lower assemblies either 100% (requiring an FFL) or 80% lowers that you know work well with your uppers with specific regard to the AR10 as they are not standardized like the AR15 platform why even bother to sell the 308 class uppers at all. I used a Noreen Firearms 80% lower on my LR308 build and with the exception of a mistake i made during the machining process and the fact it has a small ammount of play on the takedown pins this could be normal for the LR308 im not sure but it has more play than my AR15 class of rifle using the same lower to upper combination so im unsure what to think, The gun functions fine and is accurate so it may just be indicative of an AR10 i will know more when i build the .243 version next month provided yall have the uppers in stock.
The PMC Bronze was used to warm the barrel up. Federal Sierra MatchKings were used for the accuracy test. If it would make you happier Nick will show the ammo he uses during the accuracy test next time.
I bought a 16 in bca upper a while back. I put it on a psa gen 3 lower. I've had some problems. It jams constantly with 762x51. Have you guys had any issues with this. I shot some Tula 308 through it, 20 rounds with no jams. It is extremely accurate I'd say it holds at least a half in group at 100 yards. Could you let me know, are they just picky with ammo? The 762x51 ammo acted like the casing might be going to far into the chamber and having trouble letting the bolt pull it out.
We are very sorry to hear that. Please reach out to our customer service department at customerservice@bearcreekarsenal.com to gain a detailed response on how to approach that.
Bear creek arsenal the best all around United States company top tier products at a working class price I have 5 of their barrels now i need a complete package
Man I want that one that exact one
5 or 6 days ago I got my very first AR-10 / AR-308.
BC 10. Beautiful heavy 20-in 416SS.
I now have in the area of 400 rounds down range. And I have not had a single issue whatsoever. Not even the slightest hiccup. I have fired various brands and weights of .308 ammo through it and it is incredibly accurate and very very reliable.
And for 565.00 DELIVERED.... Hell you can't go wrong there. All I did was put a carry handle rear sight on to it a flip up front sight a sling and when I got it I took it apart cleaned it lubricated it fully assembled it sat there and worked the action for like 40 minutes or so...
.. and then I tore it down again cleaned and lubricated it once more and then I took it out.
I'm a little late to the party with this particular post on this thread...... But I'm telling you are reading this that you can't go wrong with a BCA No matter what some of the haters will say. You know they told me.. don't bother with Palmetto state. They're nothing but garbage. Will I have a few AR-15s from PSA and every one of them is incredibly accurate and reliable. Thousands upon thousands of rounds through all of them... No problems. I truly believe it's all about how you maintenance and maintain your weaponry. If you neglect it........ Well it's not going to work for you. You can't blame a brand for your own mistakes.
Keep up the excellent work! I will definitely be a repeat customer.
I just bought a barrel from bca put it on my aero upper and lower will let y’all know if it’s bullshit or not
Just Like others in the reviews I too received a upper with a jammed up upper receiver plug...over tighted and cross threaded , also my bolt carrier is damaged and I have scaring up and down the hand rail. My upper came loose in a box with zero packaging besides some wrap around the barrel. This was my second purchase and the first purchase came packaged perfectly but then when I buy a nicer upper it comes like this. What the heck bear creek. Please get back to me asap and make this right or I'm just going to call my bank and dispute the charge and get the payment reversed . Also ordered a mlock stap mount that wasn't in the box either. I recorded the unboxing so I'll be uploading that to RUclips if you'd like to see it.
I would like to see you guys build a bolt action upper in this caliber for the AR platform...
I don't know if this is even possible...
I have the 20", absolutely awesome
What lower did you put it on? I'm hearing all uppers don't fit all lowers on AR10
I love BCA, I just purchased my 4th barrel/upper from them for my Christmas present to myself. Bca puts out a good product at half the price some of the big name brands sell for. The big name brands might be slightly better quality but not worth twice the price and most of the time Bca uppers shoot just as good if not better than the big name brands. Take it from me, bca does the same job and most times are just as accurate or better for less cost.
Yeehaw i finally got my first ar in 308 now i just have to go through the fire and hell of trying to get the lower assembly ughh !
I purchased a .308 upper and put it on my Tennessee Arms lower. Shoots good but charging handle has to be pushed in. Need help
All yall talking about what lowers...im sure he is using a bca lower, but i know for a fact they mount right up to a psa and aero lower.
I just ordered one. I hope mine shoots as good. Putting it on a original dpms gen1 lower.
I just got a 20" fluted SS upper. I hope it's this accurate.
Let me know how well it works out for you and what the grouping looks like
Thank uou my .308 is in transit to me, my 5.56 both give better than 1 moa and i haven't even tried your reccommended ammo yet. I am very pleased. Shot groups using brar creek scopes as well
I'm definitely interested in getting one as a hog stopper. My bolt action isn't enough to put all these suckers down.
@@BigBoss89189 that's my next build now that everything has gone down a little.
Do the uppers come with adjustable gas blocks
Thx Nick
I ordered one today
will your 308 upper fit a 'right to bear arms' lower?
Will this fit the Utas AR10 lower? It’s the Turkish AR12ga, it says a DPMS upper will fit it just fine but idk anything about AR15s that arnt 5.56 or 223. Any feed back would be appreciated
Will this work with a mean arms loader, one with a fixed magazine?
Please make some more 16 inch 308 uppers with the stainless Barrel I'm waiting on them to come back in stock so I can finish a build
I really want one of these, but before I buy one I'd like to know what lowers this will run reliability on.
As long as the lower has a DPMS profile, you are good, "LR308" GEN 1. NOT THE ARMALITE STYLE
Im just going to make an observation here, I see many people have asked about lowers and which ones to use or is best to use with yalls AR10 uppers and other than a comment regarding PSA and how your uppers have different tolerances than the PSA lowers do and could cause reliability issues i have seen no other answers to peoples questions. I think yall have great products even though yall are priced toward a budget platform build the units i have built from your complete upper assemblies have worked out quite well however yall need to work on your answers to folks with the questions that customer service goes a long way to helping people see the value in your company and product.
What we as a customer needs to know especially for the first time builder as many are, We need to know which product works well with others, If yall arent going to stock lower assemblies either 100% (requiring an FFL) or 80% lowers that you know work well with your uppers with specific regard to the AR10 as they are not standardized like the AR15 platform why even bother to sell the 308 class uppers at all.
I used a Noreen Firearms 80% lower on my LR308 build and with the exception of a mistake i made during the machining process and the fact it has a small ammount of play on the takedown pins this could be normal for the LR308 im not sure but it has more play than my AR15 class of rifle using the same lower to upper combination so im unsure what to think, The gun functions fine and is accurate so it may just be indicative of an AR10 i will know more when i build the .243 version next month provided yall have the uppers in stock.
Please sell a nitride version of this on your website WITH an mlok rail
Just ordered mine today
Is nobody going to point out the box of PMC bronze siting on the shooting bench? 1:19 I would like to see how that PMC shot!
The PMC Bronze was used to warm the barrel up. Federal Sierra MatchKings were used for the accuracy test. If it would make you happier Nick will show the ammo he uses during the accuracy test next time.
I got mine is and it’s easily half moa, the accuracy guarantees are 100% true
Awesome! Glad you are enjoying it! Send us pics of the build
Where can I send them to?
Possum Mcdonald what lower did you use?
I'd like to know what lower as well
dean hinsley I used a Moriarti armaments A2 lower
I love bear creek.
Will your 308 uppers work with an aero Precision lower
That’s real nice!
Will this upper work with an aero precision lower?
Mine did
100 yard indoor range? I don't think so , I would have to see a video proving it was 100yards.
Have you ever seen their factory?? Easily 200 yards, there’s always a naysayer?
I can never find these on your website! Do you sell them? I have 2 BCA uppers and love them!
Does BCA still offer a 1 MOA guarantee??
Sweet
I bought a 16 in bca upper a while back. I put it on a psa gen 3 lower. I've had some problems. It jams constantly with 762x51. Have you guys had any issues with this. I shot some Tula 308 through it, 20 rounds with no jams. It is extremely accurate I'd say it holds at least a half in group at 100 yards. Could you let me know, are they just picky with ammo? The 762x51 ammo acted like the casing might be going to far into the chamber and having trouble letting the bolt pull it out.
We are very sorry to hear that. Please reach out to our customer service department at customerservice@bearcreekarsenal.com to gain a detailed response on how to approach that.
@@Bear_Creek_Arsenal thank you
What kind of buffer and spring is running on the buffer? 308 spring and h2 buffer?
Bear creek arsenal the best all around United States company top tier products at a working class price I have 5 of their barrels now i need a complete package
Will this fit on a UTAS XTR12
Will your 308/243 ar10 fit on dpms lr-308 lowers? Thank you
It should. Let us know if you have any trouble.
How did it group with the pmc bronze
What lower did you attach it to?
What was the distance that group was shot
The accuracy test was performed at a distance of 100 yards.
Restock !
Will your ar10 uppers run with steel ammo?
Our uppers will run with steel ammo but we recommend brass as it tends to be cleaner and provides overall better performance.
no straight answer on lower anywhere