I got my sawgrass a year ago christmas. I've haven't gotten any emails from sawgrass since 4-23 and of course i didn't even know they had any new programs until i saw your tutorial on the Academy Weekend. Wow ! Thank You ! I am a subscriber to your channel but my work has kept me super busy as this is just a hobby for me in my spare time when i get any. I have learned more from you about sawgrass than from anywhere. ❤❤❤
Hi Angie, A year later after liking this video, I am reviewing it again because I just purchased the SG1000. I haven’t did the 1:1 with Sawgrass yet, but needed to start printing asap for a mid-size order. Watching this video helped me out 💯% and I now feel confident to tackle it without any fear. Thank you!
Thank you I just got a sawgrass did the monthly subscription for designmate then found creative studio and was like what’s the difference??? Thanks for helping me to know I made the right choice!❤. Sawgrass needs to update their setup videos they still have creative studio with like 12 videos🤦♀️
I just got the monthly plan. I really didn’t understand how to download the other part because I went to print it said from your browser I didn’t get that so I had to figure it out but I did finally get it installed but thank you. I love your videos and look at more training on this would be great.🥰🥰
Thank you for helping me understand this software, I think this software is more confusing than it needs to be. Trying to get a hold of Sawgrass is very hard no one is ever there?
I always glean something useful from your videos. I gave up on Designmate and went back to creative studio. I hate that t you have a lack of batching uploads in designmate. I also hate that print mate does not work in Edge from within designmate. Chrome works fine. I was wishing for the 40oz and all the rest that they don’t seem to include even after a year of development. I know not so politically correct to say. I am going to try again thanks to you. I am on the paid version. You should mention those of us trying to make the leap that you write down which project is in which design program. Also selling is not allowed in Canada. They say it may be coming but never happened in Creative. Thanks again. This is a much watch and I am now going to look at your site. I believe you are worth following.
I did a chat with Sawgrass and set up a time for them to get on my laptop as my web browser wasn't allowing me to print...it was blocking Sawgrass. He changed a setting for me, and now It works. Maybe they can fix this for you?😊
I agree with beast5732, this tutorial was so helpful and I definitely learned more from this video than with my 1:1 with Sawgrass. Thank you for your videos, I always learn something new!!
Thank you for your video, it has helped me a lot. I have a question, can I use designmate to sublimate earrings in different shapes? Or do you knew another program to do that. Thank you for your help!
You can use this program to do that. I just print a square or circle that will cover the entire earring. You do no have to shape the print exactly like your blank.
Thank you for your video. I was wandering if when you create an account for sawgrass plus if the creative studio images and projects you did there will be transferred to the new design mate or if you have to start all over?
Hello - I just watched your video. I am contemplating purchasing a Sawgrass in the near future. Is the software available to use (become more familiar) without a sawgrass printer?
Thank you for your video. I signed up for Design mate with my same email and log in for Creative Studio. My subscription information transferred over. Will my projects and uploaded images transfer over as well or will I have to start all over? Thank you.
Thanks Angie - If I have small objects can I not move them manually to be more spread out around the top and the bottom of a design. Only seems to give one option for spacing.
I'm having a whole heap of issues with Print Mate working with Cricut's Design Studio. Not used Design Mate. I've given up and switched back to Print Manager.
When I got my SG 500 a week ago, I didn't know about PrintMate, and it took me 5 hours to find and install Print Manager to get my first print. After watching the video today, I installed PrintMate, Went into Design Mate, created a design, and tried to print to Print Mate. I was signed into both. Unfortunately, it kept wanting me to re-download Print Mate to my Mac Book. After an hour, I gave up. I'll keep designing in Canva and printing with Print Manager for now. I like the things Design Mate will do, but I don't have time to make all the software play nice with Apple! Print Manager is slow and clunky and I haven't found a way to make it print two pages of the same design at the same time. I love that Print Mate will do that, and would love to be able to design and print without the extra step of downloading to my Mac Book. Maybe one day I'll get the time to figure it out.
To print 2 pages of the same design...When Print Manager page comes up, click on the tab that says Jobs. When that page comes up there is a button below where you can choose how many prints you want click on the + button. Hope that helps.
I just bought sg500today and downloaded the print mate and created an account for both print mate and sawgrass. When I try to create something in creative studio and print it says to make sure I’ve downloaded the most updated version of print manager(I’ve downloaded print mate) and to make sure I’m signed in with same account. I thought I was I don’t know how to fix this
Great tutorial! Have you found a way to have designs come over to PrintMate at the same size as designed in DesignMate. In Print Manager we have a “preserve layout from designer” checkbox, which I always use. I’m not able to find something similar in PrintMate. In DesignMate, I set a custom canvas to 13x19, design, print, have my page size set to 13x19 in PrintMate, but my designs are not sized right when I hit fit to page or any other option. Thanks!
@@AngieHolden ok, thanks for the response, wasn’t sure if I was missing a setting. I’ve noticed they are doing fairly frequent updates, so hopefully that will be added soon. 🤞🏼
Hi Angie, I am so enjoying your tutorials. I have one question. When I designed for a 20oz tapered wine tumbler I had the design fitting inside the shaped template, but when I sent it ti PrintMate it appears straight. So before I print it, how do I know it will go around my tumbler with the words level. TIA, Mary
@@AngieHolden Thank you for your reply, but I have tried that Angie and ended up with the design looking wonky on the tumbler as it has not been shaped to the template when I save & print. :-)
Angie, on print page: on product, my only option is "cotton." I'm surprised cotton is even there. I have no preset option, and my media type is ChromaBlast, and I cannot change it. Is this because I am printing a photograph?
Sounds like you have the ink setup wrong and it things you have Chromablast ink. Check what ink you actually have and see your printer options for changing.
Hi Angie, I have the Cricut explore air 2, and I tried to cut chipboard I got from Michael’s it’s 2/25mm thick, it cut most of the way through but I had to go in with an xacto knife to finish it. Should I have used the knife blade instead of the deep cut blade and which setting is best to cut it on? Thanks for your help😃
This might be a silly question but did the images from creative studio come over to design mate? I know if you designed anything in creative studio, I don’t believe it can be saved to design studio (or can it?). I have premium subscription with creative studio and pondering cancelling that one for design studio.
I had the paid Creative Studio subscription and there was a message saying they combined the two, so I'm supposed to have the Designmate+ subscription as well, but I'm not seeing a ton of designs or backgrounds available. Is there a trick to get everything to load properly? Specifically, the print you did for this video with the oranges - I love it, but I can't find it! Thanks!
They are slowly loading everything so I notice more every time I use it. I do think the search still needs work. Try looking in the food category for this one!
Do you have to change all the print settings each time? or does it keep it them? I am just learning the other programs so not sure if I want to change. lol
I use Creative Studio. Anticipating the end of Creative Studio, I did a test where I uploaded the same project to Creative Studio and PrintMate. The Creative Studio paper print and sublimation transfer was bright and had vivid colors as I'm used to. The Printmate paper print and sublimation transfer was dark and did not look as good. I used similar setting on both, I'm not sure what is wrong?
Hi Angie since creative studio is still down and i had to add design mate aka mysawgrass program. is there a way to split an image to print on two pages to make a bigger image? I used to do this on creative studio. i would add the design print, and move the image over and print that. the new program is stating image is too large. if you have a workaround, can you please share. Thank you
One you saved your design in design mate..how do you go back in and change something? One i doubt click the program sends to creative studio and my image I uploaded is gone..
Thanks for the video. I currently use affinity designer and send designs to SPM no problem. I have downloaded print mate (only) today and I can see print mate in designer affinity however do I have to somehow connect my sawgrass printer to print mate? and if i do that will SPM still be connected as well. Thanks
Hello, good afternoon. I have a question. When do I send print after using the new version of the designmate program? When I print it? It doesn't have the good size. It's smaller than normal and ABC. Yes, I create the design with Canva. For example, when I send print, you eat a part of the design at the bottom. Anyway, I've wasted a lot of ink and paper. I can't get it out of the good size. I still prefer the old program with which I didn't have those problems. If you could help me with that. I don't know what to do when you remove the old program
Sawgrass decided to remove the old program and I am not sure why. I have not found a way to remove the margins and upload a full design successfully in printmate to get the right size.
I have designs saved in Creative Studio, I don't know how to transfer to Design Mate. Can you speak about that, especially since Creative Studio is being discontinuted.
I'm fairly new to the subli world and like most people, started out with a epson. Is this design program able to be used with other printers? I'm sorry if that is a dumb question.
Thank you so much for this video. My design won't save and send to print mate. It just says an error has occurred. Do you know what may be causing this?
This was happening to me. I set up a time with Sawgrass after chatting online and my browser setting was blocking them...they changed some settings to get it to work. 😊
When making a design canvas inside the design mate, I make my item (metal sign) an 8x10 image. When I click ‘print’ and print mate comes up, it resizes my images and doesn’t allow me to size it to 8x10 again. I cannot figure out how to make it just keep my design the way I designed it… any help?
Angie, I have a question... Just got my sawgrass printer. I use silhouette studio. Everytime I try to send my design to printmate it's giving me a blue background around my image. Any suggestions or help as to how to fix this? Sawgrass support hasn't been much help!
buenas, hoy me llego la impresora sg500, la compre porque quiero imprimir fundas para celular, el molde no se encuentra como hago para imprimir la hoja_? muchas gracias por la colaboracion
When using Silhouette program how to you get Sawgrass to mirrow it? Is there a setting I can put on Sawgrass to mirrow at all times. When I'm using my other software? Or do I have to manually do mirrow?
How do you get to the new software? I got into my sawgrass account and it did not give the option to use designmate. Can you only access with subscription?
Hi I'm a newbie to the software I'm currently using cricut but when I send to print and choose printmate it sends and will print but doest show the design on the right side so unable to edit as i cannot see image it just turns white? If I drag it into printmate it shows the image very confused. I've also just subscribed to design mate too.
I need help how do I get the new design papermate make the image larger? I want to piece together the image put it keeps saying won't fit to image on printer.
Maybe try designing in another program and just using print mate to print. You will have to account for margins with this printer as it will not print to the edge.
Hi I have a question can the designs that is on my sawgrass now will I still be able to use on the sawgrass when i start to use designmate etc. Do you have a video on this? thank you
I recently had to download DesignMate and PrintMate and I hate it. My files change size and layout when printing from DesignMate to PrintMate. Can you help me?
I've been using Sawgrass creative studio and all of a sudden it's just gone??! They didn't even send an email to let me know. Am I doing something wrong?
Hi Angie , I have two problems each time I download printmate it would disappear the next day because i turned my laptop off. Also when I am in design mate and I do a custom design I would set the measurements but where do I go next to get my design that I have uploaded please help
If you installed printmate, it is on your computer. Try using the search bar at the bottom to look for it. You can go to settings to start it each time your computer starts. If you uploaded a design, go to uploads and look for it there.
I have had my Sawgrass 500 a couple of weeks ago. I have an issue 95% of the time when I send the image from Design Mate to Print Mate I end up with an error Image Not Linked. Once in a great while, the image transfers correctly and I can never figure out what I did different to get it to show up in Print Mate. I have used both jpg and png. I will get the above error and then finally using the same image it will show up in Print Mate where I can then print it. Any help?
I am printing a mug and I think I have all the settings correct. It sends it but says stopped there are conflicting options but I can't see anything conflicting. I selected bypass tray and put my paper size 4x9.5 and had added that. I tried fit to page and not fit to page and get the same thing on both....won't print due to conflicting options - initially I had that red error like you did but that went away
I somehow figured it out - bypass tray was turned off in the settings for the sawgrass. I had to select that option. Never had to do this before but fixed!
What does this mean? "Internal server error (request ID: b99ef0e650d45d210acf1412c91f3ff5)" It always comes up whenever i try to save my designs to creative studio
Hi, I am trying to download printmate and it's not letting me do it, I really want to get this, can you help me with this I have followed all the directions and still nothing.
How do you print from Silhouette Studio with Print Mate? I just sent a file to Print Mate from SS and it started printing instead of allowing me to make any changes in Print Mate.
My print mate locked up on me and after it shut down I can't get it to pull back up. I have tried uninstalling and reinstalling and nothing. What do I do? Help.....this is my first printer
@@AngieHolden I have tried that and it still isn't working. I have it on the desktop but now it is doing the exact same thing. I tried uploading a picture and it locked it up. Now I have a blank screen.
Unfortunately 40 seconds in you say we can still use creative studio and print manager however! on the 1st feb 2025 they will stop working and you have to change.. so change asap to get used to it. some bits of the new software are great but some bits are terrible.. i mean where is the 3d rotating preview. and cant print from the likes of silhouette studio. going to be a fun 8/9 months
non of your videos show the design on the screen and later already made sublimated product from sawgrass in comparison to the screen you see. You said that you have but you don't. Maybe making one video would show people true colours of sawgrass
Wow - I am super disappointed with my purchase so far. I bought the SG500 in January, but am just now setting it up. I am very techy, and I'm having so many issues! I can only imagine what those who struggle with tech are experiencing. So far, I have it connected via Wifi to my Mac, but I am not able to use DesignMate at all without paying for it. That's a huge disappointment! Why sell you an expensive printer then limit the software - feels really unethical so far. I do have my appointment with the setup tech this afternoon and I hope that this issue is just me not understanding something. Otherwise, what did I pay for??? Printmate is horrible (so far), I can't get anything to work with Designmate. I can create an image, but it won't let me print anything but a proof - it says that I have to purchase the subscription to save or print the design. Really???? Again, I hope I'm wrong and just missing something. Definitely not happy with this $1000+ outlay so far (printer, ink, and paper). 😞 All of the videos and tutorials should be updated by Sawgrass for the new process!
@@AngieHolden Thanks! I figured that part out. It just seemed all the designs I was looking at are only in the paid version. I did the setup Zoom onboarding call with Sawgrass, but it was not what I was expecting. He basically went over their website and did an intro into the software and storefront. Didn't even touch on system setup. I have finally got it figured out and I can print! I set my account up, but am not in love with DesignMate at this time. I can seriously see why people get frustrated. I'm a seasoned techy person that crafts a lot, so for a novice this must be overwhelming. Keep the videos coming! You (and your fellow youtubers) are wonderful and provide so much help!
I can't believe this stupid change SG did! Print Mate is the worst. I always use 19x13 in Silhouette design. Print Mate has no option for 19x13, so I did custom. It gave me a good preview only to print incorrectly. I had to get a tech into my computer to see why. Then they said I needed to select A3 paper for 19x13. What! That night it started printing my images in all the wrong sizes. I complained again, and then they said to use A3+ paper! Why can't they just have the paper 19x13?! I wasted paper, ink, time, and money!
Never buy a Sawgrass printer unless you like being forced to pay $300 for ink. The force firmware to your printer making it unusable with offbrand ink.
I got my sawgrass a year ago christmas. I've haven't gotten any emails from sawgrass since 4-23 and of course i didn't even know they had any new programs until i saw your tutorial on the Academy Weekend. Wow ! Thank You ! I am a subscriber to your channel but my work has kept me super busy as this is just a hobby for me in my spare time when i get any. I have learned more from you about sawgrass than from anywhere. ❤❤❤
That is awesome!
Hi Angie, A year later after liking this video, I am reviewing it again because I just purchased the SG1000. I haven’t did the 1:1 with Sawgrass yet, but needed to start printing asap for a mid-size order. Watching this video helped me out 💯% and I now feel confident to tackle it without any fear. Thank you!
YAY!
They are getting rid of Creative Studio and Print Manager in February....so, THANK YOU for your video! It has helped a lot with the upcoming changes!
Happy to help!
I just got my sawgrass printer today and Im trying to print but it's giving me a welcome to the printer installer page
Be sure you are logged in to sawgrass when printing. It should skip that page and print.
Thank you I just got a sawgrass did the monthly subscription for designmate then found creative studio and was like what’s the difference??? Thanks for helping me to know I made the right choice!❤. Sawgrass needs to update their setup videos they still have creative studio with like 12 videos🤦♀️
This is very new so I think they are working on it!
That's pretty neat! I don't have a Sawgrass, but I like to watch videos like this to see what else is out there for future reference.
It is definitely good to know what else is out there!
I just got the monthly plan. I really didn’t understand how to download the other part because I went to print it said from your browser I didn’t get that so I had to figure it out but I did finally get it installed but thank you. I love your videos and look at more training on this would be great.🥰🥰
Hope you enjoy it!
Thank you so much for always having videos that are very clear and easy to understand. We do appreciate it!!
Happy to help!
Thank you for helping me understand this software, I think this software is more confusing than it needs to be. Trying to get a hold of Sawgrass is very hard no one is ever there?
I always glean something useful from your videos. I gave up on Designmate and went back to creative studio. I hate that t you have a lack of batching uploads in designmate. I also hate that print mate does not work in Edge from within designmate. Chrome works fine. I was wishing for the 40oz and all the rest that they don’t seem to include even after a year of development. I know not so politically correct to say. I am going to try again thanks to you. I am on the paid version. You should mention those of us trying to make the leap that you write down which project is in which design program. Also selling is not allowed in Canada. They say it may be coming but never happened in Creative. Thanks again. This is a much watch and I am now going to look at your site. I believe you are worth following.
Thank you! Yes I did not talk about that the two programs do not overlap. Sometimes I am like I know I uploaded that pattern. Um....wrong program!
I did a chat with Sawgrass and set up a time for them to get on my laptop as my web browser wasn't allowing me to print...it was blocking Sawgrass. He changed a setting for me, and now It works. Maybe they can fix this for you?😊
I agree with beast5732, this tutorial was so helpful and I definitely learned more from this video than with my 1:1 with Sawgrass. Thank you for your videos, I always learn something new!!
Glad it helped!
Thank you so much for this video! I learned so much and now I’m ready to try it.
Wonderful!
I liked on creative studio how I could determine the size of everything I have on my project. I cannot figure out how to do that on DesignMate.
Thank you for your video, it has helped me a lot. I have a question, can I use designmate to sublimate earrings in different shapes? Or do you knew another program to do that. Thank you for your help!
You can use this program to do that. I just print a square or circle that will cover the entire earring. You do no have to shape the print exactly like your blank.
Excellent tutorial. Just what I needed. Thanks so much!!
Thank you for your video. I was wandering if when you create an account for sawgrass plus if the creative studio images and projects you did there will be transferred to the new design mate or if you have to start all over?
Image and projects DO NOT transfer.
Wow this looks a lot more user friendly to me Thx ❤
Video is a huge help! Can I access my creations in creative studio through designate or do I have to start all over again?
You do have to start all over as they do not transfer.
Looks like a major improvement! How do we get it? I hope it is easier to install on a Mac.
Go to sawgrass exchange!
Hello - I just watched your video. I am contemplating purchasing a Sawgrass in the near future. Is the software available to use (become more familiar) without a sawgrass printer?
I think you can download it from their website!
Thank you for your video. I signed up for Design mate with my same email and log in for Creative Studio. My subscription information transferred over. Will my projects and uploaded images transfer over as well or will I have to start all over? Thank you.
Projects and uploaded images DO NOT transfer.
Thanks Angie - If I have small objects can I not move them manually to be more spread out around the top and the bottom of a design. Only seems to give one option for spacing.
I would probably design on an 8 1/2 x 11 sheet and move them around there and then go to print.
@@AngieHolden should l try this in design mate or something else
You can do it either way!
Hi Angie …. Would you consider or do you already have tutorial for working with Sawgrass?
I have several. Not sure what you are looking for?
I'm having a whole heap of issues with Print Mate working with Cricut's Design Studio. Not used Design Mate. I've given up and switched back to Print Manager.
Just to let you know they are getting rid of Print Manager completely very soon!
When I got my SG 500 a week ago, I didn't know about PrintMate, and it took me 5 hours to find and install Print Manager to get my first print. After watching the video today, I installed PrintMate, Went into Design Mate, created a design, and tried to print to Print Mate. I was signed into both. Unfortunately, it kept wanting me to re-download Print Mate to my Mac Book. After an hour, I gave up. I'll keep designing in Canva and printing with Print Manager for now. I like the things Design Mate will do, but I don't have time to make all the software play nice with Apple!
Print Manager is slow and clunky and I haven't found a way to make it print two pages of the same design at the same time. I love that Print Mate will do that, and would love to be able to design and print without the extra step of downloading to my Mac Book. Maybe one day I'll get the time to figure it out.
Sounds like you have a pop up blocker installed not allowing print mate to open.
To print 2 pages of the same design...When Print Manager page comes up, click on the tab that says Jobs. When that page comes up there is a button below where you can choose how many prints you want click on the + button. Hope that helps.
I started out this way too! I set up a time for Sawgrass to come on and do it for me on my mac...so much easier!😊
I just bought sg500today and downloaded the print mate and created an account for both print mate and sawgrass. When I try to create something in creative studio and print it says to make sure I’ve downloaded the most updated version of print manager(I’ve downloaded print mate) and to make sure I’m signed in with same account. I thought I was I don’t know how to fix this
I think it may say this every time?
Are you doing any live training classes for beginners?
No I do not.
@@AngieHolden Ok, thank you.
Great tutorial! Have you found a way to have designs come over to PrintMate at the same size as designed in DesignMate. In Print Manager we have a “preserve layout from designer” checkbox, which I always use. I’m not able to find something similar in PrintMate. In DesignMate, I set a custom canvas to 13x19, design, print, have my page size set to 13x19 in PrintMate, but my designs are not sized right when I hit fit to page or any other option. Thanks!
Yea I was having issues with print mate moving them. There was some updates but I still didn't find a way to make it happen all of the time.
@@AngieHolden ok, thanks for the response, wasn’t sure if I was missing a setting. I’ve noticed they are doing fairly frequent updates, so hopefully that will be added soon. 🤞🏼
Hi Angie, I am so enjoying your tutorials. I have one question. When I designed for a 20oz tapered wine tumbler I had the design fitting inside the shaped template, but when I sent it ti PrintMate it appears straight. So before I print it, how do I know it will go around my tumbler with the words level. TIA, Mary
I really can't picture what you are making. I would probably print it and wrap it around and see if I think it will look right before sublimating.
@@AngieHolden Thank you for your reply, but I have tried that Angie and ended up with the design looking wonky on the tumbler as it has not been shaped to the template when I save & print. :-)
I am not sure if design mate curves the designs. You may have to use another program to do that.
Angie, on print page: on product, my only option is "cotton." I'm surprised cotton is even there. I have no preset option, and my media type is ChromaBlast, and I cannot change it. Is this because I am printing a photograph?
Sounds like you have the ink setup wrong and it things you have Chromablast ink. Check what ink you actually have and see your printer options for changing.
Hi, this is awesome, I can't find the link to the paid version ? Can you please send me the link? Please and thank you.
You can sign up within designmate!
@@AngieHolden I couldn't find it
I just downloaded PrintMate - do I also have to download DesignMate - can't seem to find where to do this? Thank you for your videos!!
Print mate is for printing. Design mate would be for doing any design work.
Am I able to print from Canva to PrintMate, or do I have to download it and upload to PrintMate@@AngieHolden . Thank you!!
I like the Exchange but I don't have all of my artwork that I have in Creative Studio so I'm stuck using Creative Studio.
Yea you would have to move it over manually.
My entire sawgrass account has disapearred, I can't even access my old stuff anymore?
@@AngieHolden
Hi Angie, I have the Cricut explore air 2, and I tried to cut chipboard I got from Michael’s it’s 2/25mm thick, it cut most of the way through but I had to go in with an xacto knife to finish it. Should I have used the knife blade instead of the deep cut blade and which setting is best to cut it on? Thanks for your help😃
The explore air 2 doesn’t have a knife blade. About 1 to 1.5 mm chipboard is going to be the thickest you can cut with that machine.
@@AngieHolden ohhh ok, thank you for your help😃
This might be a silly question but did the images from creative studio come over to design mate? I know if you designed anything in creative studio, I don’t believe it can be saved to design studio (or can it?). I have premium subscription with creative studio and pondering cancelling that one for design studio.
They do not come over.
When you upload a template for a blank, like the tear drop earrings, how do you do multiple at the same time?
There is a "repeat" in the printer utility and that will make copies.
Is Pintmatte and Print Utility the same software? thanks x
Print Mate is the software from Sawgrass.
I had the paid Creative Studio subscription and there was a message saying they combined the two, so I'm supposed to have the Designmate+ subscription as well, but I'm not seeing a ton of designs or backgrounds available. Is there a trick to get everything to load properly? Specifically, the print you did for this video with the oranges - I love it, but I can't find it! Thanks!
They are slowly loading everything so I notice more every time I use it. I do think the search still needs work. Try looking in the food category for this one!
@@AngieHolden Thank you!
Do you have to change all the print settings each time? or does it keep it them? I am just learning the other programs so not sure if I want to change. lol
You can set defaults to be the same each time.
I am a new Sawgrass user and I cannot find Print Manager. PrintMate is so flakey. I am regretting purchasing due to both PrintMate and DesignMate.
I can usually google "sawgrass print manager" and find an old link in the results that will allow me to access it.
I use Creative Studio. Anticipating the end of Creative Studio, I did a test where I uploaded the same project to Creative Studio and PrintMate. The Creative Studio paper print and sublimation transfer was bright and had vivid colors as I'm used to. The Printmate paper print and sublimation transfer was dark and did not look as good. I used similar setting on both, I'm not sure what is wrong?
Maybe try different settings in Printmate?
Do you have to have a Sawgrass printer to be able to use the DesignMate and PrintMate?
You can use Design Mate but you can't print with Print Mate unless you have a Sawgrass printer.
Hi Angie since creative studio is still down and i had to add design mate aka mysawgrass program. is there a way to split an image to print on two pages to make a bigger image? I used to do this on creative studio. i would add the design print, and move the image over and print that. the new program is stating image is too large. if you have a workaround, can you please share. Thank you
I do not have a work around for that in Creative Studio. You can split in Adobe acrobat and just send to print mate.
One you saved your design in design mate..how do you go back in and change something? One i doubt click the program sends to creative studio and my image I uploaded is gone..
I literally have not idea unless you save it at the end to your store but don't add for sale. Then I think you can edit.
If I’m doing a t shirt design how would I send this to my cricut and go about cutting it? Please and thank you 😊 I’m brand new to this
With sublimation, you don't have to cut anything. You can just print and press.
Thanks for the video. I currently use affinity designer and send designs to SPM no problem. I have downloaded print mate (only) today and I can see print mate in designer affinity however do I have to somehow connect my sawgrass printer to print mate? and if i do that will SPM still be connected as well. Thanks
You can use both at the same time right now. I would start using print mate as they are discontinuing SPM soon.
Hello, good afternoon. I have a question. When do I send print after using the new version of the designmate program? When I print it? It doesn't have the good size. It's smaller than normal and ABC. Yes, I create the design with Canva. For example, when I send print, you eat a part of the design at the bottom. Anyway, I've wasted a lot of ink and paper. I can't get it out of the good size. I still prefer the old program with which I didn't have those problems. If you could help me with that. I don't know what to do when you remove the old program
Sawgrass decided to remove the old program and I am not sure why. I have not found a way to remove the margins and upload a full design successfully in printmate to get the right size.
I have designs saved in Creative Studio, I don't know how to transfer to Design Mate. Can you speak about that, especially since Creative Studio is being discontinuted.
They do not transfer. You would have to recreate them.
If you have a seamless design that’s 6” x 6” can you resize it to make it 8 1/2” x 11”. I’m new to the sawgrass software.
You can resize but it would not be seamless any longer.
I'm fairly new to the subli world and like most people, started out with a epson. Is this design program able to be used with other printers? I'm sorry if that is a dumb question.
Sorry this is only for Sawgrass users.
@@AngieHolden no worries! Looks like another reason to upgrade in the future
Thank you so much for this video. My design won't save and send to print mate. It just says an error has occurred. Do you know what may be causing this?
I do not. Sorry! You might contact Sawgrass.
This was happening to me. I set up a time with Sawgrass after chatting online and my browser setting was blocking them...they changed some settings to get it to work. 😊
I’m getting sawgrass sg500 today and I was wondering if I can still use canva because I feel like the sawgrass and print mate too much for me.
You can use Canva but you will have to use print mate to send it to the printer.
When making a design canvas inside the design mate, I make my item (metal sign) an 8x10 image. When I click ‘print’ and print mate comes up, it resizes my images and doesn’t allow me to size it to 8x10 again. I cannot figure out how to make it just keep my design the way I designed it… any help?
It should not be resizing it! Maybe play with the options and make sure it is printing as you import it.
Angie, I have a question... Just got my sawgrass printer. I use silhouette studio. Everytime I try to send my design to printmate it's giving me a blue background around my image. Any suggestions or help as to how to fix this? Sawgrass support hasn't been much help!
Gosh I have not seen that! Sorry!
Im sure im just missing something here but where do i find my saved projects?
They should go to your profile.
How to take back grounds out of photos using print mate or print design
It is seriously not great at that as I tried for something I was working on. I ended up removing the background in something else.
My designs aren't getting sent over to Print mate when I click the button. It's so frustrating
All you can do is contact sawgrass.
Is there a way to print multiple images and print on one page? different images
Make a custom canvas the size of your paper then add as many as you would like.
buenas, hoy me llego la impresora sg500, la compre porque quiero imprimir fundas para celular, el molde no se encuentra como hago para imprimir la hoja_? muchas gracias por la colaboracion
You can usually find a template on the website where you purchased your blanks.
@@AngieHoldenmuchas gracias por responder, no se donde se compran y no se que son los espacios en blanco, mis impresiones salen con mucha tinta
wondering can you upload fonts on the free version of design mate?
When using Silhouette program how to you get Sawgrass to mirrow it? Is there a setting I can put on Sawgrass to mirrow at all times. When I'm using my other software? Or do I have to manually do mirrow?
When printing to a sawgrass you will always go through PrintMate so just mirror in there.
How do you get to the new software? I got into my sawgrass account and it did not give the option to use designmate. Can you only access with subscription?
I put the link in the description below this video. It is on the Sawgrass Exchange.
Does the custom size feature save in designmate? Like in cs you can't save custom sizes
Yes you can!
How do I make multiple ornaments on one sheet?
You can add more copies in PrintMate or do a custom canvas in DesignMate and lay them out.
How do I transfer my designs to design mate ?
Any designs in the old Sawgrass program will not transfer.
Hi I'm a newbie to the software I'm currently using cricut but when I send to print and choose printmate it sends and will print but doest show the design on the right side so unable to edit as i cannot see image it just turns white? If I drag it into printmate it shows the image very confused. I've also just subscribed to design mate too.
Might be your internet connection? When you go from Design Mate to Print Mate it is downloading the design and then displaying it for you.
I need help how do I get the new design papermate make the image larger? I want to piece together the image put it keeps saying won't fit to image on printer.
Maybe try designing in another program and just using print mate to print. You will have to account for margins with this printer as it will not print to the edge.
I have noticed that when I print with PrintMate the color is different than Print Manager. Print Manager is closer to my design. Any suggestions?
Sorry I am not sure!
When I send to printmate, the wheel just spins . Not sure what to check. I ran an update. Closed . Reopened. No improvement.
Try restarting your computer.
@@AngieHolden one of the first things I did
Can u use a sawgrass from Cricut design so e
You can but it will send it to print mate and you will add your settings there.
Hi I have a question can the designs that is on my sawgrass now will I still be able to use on the sawgrass when i start to use designmate etc. Do you have a video on this? thank you
No. The designs do not transfer.
Can you use sawgrass printer to print your stored designs ? If I get the new version?
I don't think you will be able to after they discontinue the software.
Thank you.
When sending the image to print mate it says failed when uploading do you know how to fix that ? Thank you
Could be an internet connection issue.
Is design mate down rite now ? It’s not working for me
Sorry! Not sure!
Where i should press print it is saying ,,firmware update required" what do i do?
You can update the firmware on the printer itself. Probably on the front screen of the printer.
I recently had to download DesignMate and PrintMate and I hate it. My files change size and layout when printing from DesignMate to PrintMate. Can you help me?
Unfortunately they are changing to this program completely. Not sure about changing layout? But for size, it should keep your size overall.
I've been using Sawgrass creative studio and all of a sudden it's just gone??! They didn't even send an email to let me know. Am I doing something wrong?
I haven't seen anything but it is the older program.
Hi Angie , I have two problems each time I download printmate it would disappear the next day because i turned my laptop off. Also when I am in design mate and I do a custom design I would set the measurements but where do I go next to get my design that I have uploaded please help
If you installed printmate, it is on your computer. Try using the search bar at the bottom to look for it. You can go to settings to start it each time your computer starts. If you uploaded a design, go to uploads and look for it there.
I have had my Sawgrass 500 a couple of weeks ago.
I have an issue 95% of the time when I send the image from Design Mate to Print Mate I end up with an error Image Not Linked.
Once in a great while, the image transfers correctly and I can never figure out what I did different to get it to show up in Print Mate.
I have used both jpg and png. I will get the above error and then finally using the same image it will show up in Print Mate where I can then print it.
Any help?
I have seen this error. I would contact Sawgrass and let them walk you through it on your computer.
When I tried to print in printmate the print had lines!
Try running a nozzle check. You may need to do some printer maintenance.
I am printing a mug and I think I have all the settings correct. It sends it but says stopped there are conflicting options but I can't see anything conflicting. I selected bypass tray and put my paper size 4x9.5 and had added that. I tried fit to page and not fit to page and get the same thing on both....won't print due to conflicting options - initially I had that red error like you did but that went away
I somehow figured it out - bypass tray was turned off in the settings for the sawgrass. I had to select that option. Never had to do this before but fixed!
Hi Angie, is there a way to transfer my images from my Sawgrass images to Print Mate as it doesn't seem to find them.Thanks
There is not a way. I wish there was!
@@AngieHolden Ok, thanks for replying & keep the vids coming, i find them very helpful.
What does this mean?
"Internal server error (request ID: b99ef0e650d45d210acf1412c91f3ff5)"
It always comes up whenever i try to save my designs to creative studio
Sorry not sure.
Hi, I am trying to download printmate and it's not letting me do it, I really want to get this, can you help me with this I have followed all the directions and still nothing.
Make sure you don't have a pop up blocker or that you turn it off. That was my issue at first!
Can I download print mate on SG 400?
I think so.
I have a 400 and did not have any problems downloading print, Mate or design Mate
How do you print from Silhouette Studio with Print Mate? I just sent a file to Print Mate from SS and it started printing instead of allowing me to make any changes in Print Mate.
Change your settings to open PrintMate first.
@@AngieHoldenHow do you do this?
Why does my print mate go to blank page
I would uninstall it and reinstall it.
After i create in Design Mate my designs stopped going to print mate. Nothing happens when i click open in print mate.
Try rebooting everything first. Then uninstall and reinstall the software.
Thank you, I uninstalled everything. I cannot find the download for Design Mates. @@AngieHolden
Try apps at the top of this page: www.sawgrassink.com/
would you happen to know why my designs are not getting sent to print mate or what may cause this? Yes I have the app downloaded
Do you have a pop up blocker on? That might prevent it from opening.
@@AngieHolden lol I did 😂 I finally realized this after about 30 minutes of fussing at the computer 🤣
My print mate locked up on me and after it shut down I can't get it to pull back up. I have tried uninstalling and reinstalling and nothing. What do I do? Help.....this is my first printer
I would uninstall the software and the printer then start over again.
@@AngieHolden I have tried that and it still isn't working. I have it on the desktop but now it is doing the exact same thing. I tried uploading a picture and it locked it up. Now I have a blank screen.
I would contact Sawgrass.
My print mate isnt connecting
Unfortunately 40 seconds in you say we can still use creative studio and print manager however! on the 1st feb 2025 they will stop working and you have to change.. so change asap to get used to it. some bits of the new software are great but some bits are terrible.. i mean where is the 3d rotating preview. and cant print from the likes of silhouette studio. going to be a fun 8/9 months
At the time I made this video that was true. Sawgrass has since made a new announcement.
non of your videos show the design on the screen and later already made sublimated product from sawgrass in comparison to the screen you see. You said that you have but you don't. Maybe making one video would show people true colours of sawgrass
I am happy with colors from my Sawgrass printer and you can find videos on my channel that do just as you are mentioning.
Wow - I am super disappointed with my purchase so far. I bought the SG500 in January, but am just now setting it up. I am very techy, and I'm having so many issues! I can only imagine what those who struggle with tech are experiencing. So far, I have it connected via Wifi to my Mac, but I am not able to use DesignMate at all without paying for it. That's a huge disappointment! Why sell you an expensive printer then limit the software - feels really unethical so far.
I do have my appointment with the setup tech this afternoon and I hope that this issue is just me not understanding something. Otherwise, what did I pay for??? Printmate is horrible (so far), I can't get anything to work with Designmate. I can create an image, but it won't let me print anything but a proof - it says that I have to purchase the subscription to save or print the design. Really???? Again, I hope I'm wrong and just missing something. Definitely not happy with this $1000+ outlay so far (printer, ink, and paper). 😞
All of the videos and tutorials should be updated by Sawgrass for the new process!
You do NOT have to pay for design mate. It may be asking you if you want a subscription but just say no.
@@AngieHolden Thanks! I figured that part out. It just seemed all the designs I was looking at are only in the paid version. I did the setup Zoom onboarding call with Sawgrass, but it was not what I was expecting. He basically went over their website and did an intro into the software and storefront. Didn't even touch on system setup.
I have finally got it figured out and I can print! I set my account up, but am not in love with DesignMate at this time. I can seriously see why people get frustrated. I'm a seasoned techy person that crafts a lot, so for a novice this must be overwhelming.
Keep the videos coming! You (and your fellow youtubers) are wonderful and provide so much help!
They are doing away with creative studio in February 2025.
Yes they are!
I can't believe this stupid change SG did! Print Mate is the worst. I always use 19x13 in Silhouette design. Print Mate has no option for 19x13, so I did custom. It gave me a good preview only to print incorrectly. I had to get a tech into my computer to see why. Then they said I needed to select A3 paper for 19x13. What! That night it started printing my images in all the wrong sizes. I complained again, and then they said to use A3+ paper! Why can't they just have the paper 19x13?! I wasted paper, ink, time, and money!
Sorry!
Never buy a Sawgrass printer unless you like being forced to pay $300 for ink. The force firmware to your printer making it unusable with offbrand ink.