Thanks for your guidelines, but one important additional comments is needed. To boot from USB Drive, "Secure boot" should be disabled and "Legacy boot" should be enabled. These actions can be done in BIOS setup (Secure boot configuration)
Worked perfectly! Thank you! BIOS on my HP ProDesk 600 G1 SFF is now up to date! Have you ever covered a RAM addition question? I have it working with a 2GB 1Rx8 PC3-10600U-9-11-A1. All other 2GB and 4GB sticks, either 1Rx8 or 2Rx8, or PC3-10600U or 12800U (varying last 3 sets of numbers), and all i get from them are 5 beeps with 5 red flashing power button lights. Any idea why only the one stick works when others that are the same (except the 9-11-A1) do not? Thanks again!
Ok so I did everything like you said but when i go to click on my flashdrive in the bios it says attempting to boot from usb device and it simply boot from it. I desable "secure boot" and unable "legacy boot". I have the hp prodesk 600 g1 sff. Did i do something wrong ?
Awesome video..Thank you..However I see you flashed the bios up to version 2.77,I was only able to find version 2.71 which came out in 2017..I pulled it from the HP website..Any ideas where to find it? However the bios upgrade was a complete success..Thanks!!
Hello, I found that out some months when I looked for a new update for the model in the video. The best answer i found in the HP forums was that HP might have found some issue(s) with that update, 2.77. Since the model is old, instead of creating a patch or a new version they decided to replaced it with a previous version that worked and doesn't have any problems. So, the version you have is the official latest bios update version for that model. It's odd to me as well as I have ver 2.77 on my machine but that version doesn't exist anymore. Hope it helps Thanks for the comment!
Hello, could you please tell me what to do if I have a black screen when booting from a USB key ?..... doesn't want to let me into this interface to update bios
I can't seem to find the latest bios update for my HP prodesk 600 g1 sff. we have the same model but the only available bios update for me in the website is in year 2017.
Hello Joshua, I look using another serial number, it also showed me the 2017 bios update. I no longer have the specific hp desktop that i used for the video. 2 reason i think that may happen: 1) The 2019 update was giving problems to people who installed it, so they decided to remove it while they work on an upgrade. 2) The model I used for the video had some hardware that was a little different than the rest. Therefore, the 2019 update is only available when you type a specific group of serial numbers. Again, that’s what think happened 😑😑😑😑 Hope it helps Thanks for the comment
Got a question From what I understood, some guy said that you need the 8.1 version of the bios to be able to use a gt 1030 gpu Yet i see that (i have the same as You, 600 g1 sff) my pc's latest version is 02.71 or something (from 2017) Does the bios version really matter And if Yes, is mine good enough?
Hello, On that same computer i installed and configured a 1050 ti gpu. I upgraded to the latest bios and windows 10 version before installing. Hope it helps Thanks for the comment
@@MyITWorkshop Yeah Well, the latest version is that 02.71 Or whatever, from 2017 And yes I'm using Windows 10 too So i suppose it would work for me too Thanks for the quick reply
Great video, sorry to ask this, but updating the BIOS is necessary? I have HP ProDesk 600 G1. With a i5 4590 CPU. The BIOS version it has is from 2014 and the latest version available in HP support page is 2020. In this case is necessary Updating the BIOS and why? Thanks 🙏🏻
Hello Cayo, You update the bios principally for security updates that patches up vulnerabilities. The other reason(s) is to get new features, (this is more for older computers), that allow you to use let's say with new/not so common operating systems. Hope it helps Thanks for the comment!
Thanks for your video. Just upgraded my HP Prodesk BIOS 2.33 from 2014, to 2.78 from 2020
I love you bro, It worked on my PRODESK 600 G1 TWR
Thanks for your guidelines, but one important additional comments is needed.
To boot from USB Drive, "Secure boot" should be disabled and "Legacy boot" should be enabled.
These actions can be done in BIOS setup (Secure boot configuration)
thanks papi
Thanks my friend!
Worked perfectly! Thank you! BIOS on my HP ProDesk 600 G1 SFF is now up to date! Have you ever covered a RAM addition question? I have it working with a 2GB 1Rx8 PC3-10600U-9-11-A1. All other 2GB and 4GB sticks, either 1Rx8 or 2Rx8, or PC3-10600U or 12800U (varying last 3 sets of numbers), and all i get from them are 5 beeps with 5 red flashing power button lights. Any idea why only the one stick works when others that are the same (except the 9-11-A1) do not? Thanks again!
Ok so I did everything like you said but when i go to click on my flashdrive in the bios it says attempting to boot from usb device and it simply boot from it. I desable "secure boot" and unable "legacy boot". I have the hp prodesk 600 g1 sff. Did i do something wrong ?
Awesome video
Awesome video..Thank you..However I see you flashed the bios up to version 2.77,I was only able to find version 2.71 which came out in 2017..I pulled it from the HP website..Any ideas where to find it? However the bios upgrade was a complete success..Thanks!!
Hello,
I found that out some months when I looked for a new update for the model in the video.
The best answer i found in the HP forums was that HP might have found some issue(s) with that update, 2.77. Since the model is old, instead of creating a patch or a new version they decided to replaced it with a previous version that worked and doesn't have any problems.
So, the version you have is the official latest bios update version for that model.
It's odd to me as well as I have ver 2.77 on my machine but that version doesn't exist anymore.
Hope it helps
Thanks for the comment!
any improvements or problem after updating BIOS ?
Pls share your experiences.
Hello, could you please tell me what to do if I have a black screen when booting from a USB key ?..... doesn't want to let me into this interface to update bios
Can this fix my ssd rarely showing up ?
I can't seem to find the latest bios update for my HP prodesk 600 g1 sff. we have the same model but the only available bios update for me in the website is in year 2017.
Hello Joshua,
I look using another serial number, it also showed me the 2017 bios update. I no longer have the specific hp desktop that i used for the video.
2 reason i think that may happen:
1) The 2019 update was giving problems to people who installed it, so they decided to remove it while they work on an upgrade.
2) The model I used for the video had some hardware that was a little different than the rest. Therefore, the 2019 update is only available when you type a specific group of serial numbers.
Again, that’s what think happened 😑😑😑😑
Hope it helps
Thanks for the comment
@@MyITWorkshop Thanks for the info, it really helped me a lot.
Got a question
From what I understood, some guy said that you need the 8.1 version of the bios to be able to use a gt 1030 gpu
Yet i see that (i have the same as You, 600 g1 sff) my pc's latest version is 02.71 or something (from 2017)
Does the bios version really matter
And if Yes, is mine good enough?
Hello,
On that same computer i installed and configured a 1050 ti gpu. I upgraded to the latest bios and windows 10 version before installing.
Hope it helps
Thanks for the comment
@@MyITWorkshop
Yeah Well, the latest version is that 02.71 Or whatever, from 2017
And yes I'm using Windows 10 too
So i suppose it would work for me too
Thanks for the quick reply
Thanks, my ram memory is 1600 hz but it detects 1333 as I increase the frequency
Thanks a lot. I updated my prodesk 600!!!
Hello I have a HP Compaq 6000 Pro MT model computer. Can you help to prepare modded bios to work with modded Xeon X5460? greetings from Turkey
Do you know how to update the bios of a HP Pro 3400 micro tower?
Hello,
The process is fairly similar for most models.
Thanks for the comment!
@@MyITWorkshop for me i can't even pass the installation idky.
a question? the hp prodesk 600 g1 supports xeon lga 1150 processor
Yes it does but I wouldn't suggest such a good processor in this system
where's overclok settings
Hi i want to ask if xeon e3 v3 processors are compatible with the unit
HP Prodesk 600 G1 with BIOS ver 2.65 from 2015 works well with Xeon E3 1265L v3 in my case.
Help me please!Por qué mi pantalla se quedó en color negro y con el cursor en medio de esta?
Do you know how to update the bios of a normal.pc with bootable dos usb
Hello Sir Jax,
What do you mean by normal pc?
How to click ~
Great video, sorry to ask this, but updating the BIOS is necessary?
I have HP ProDesk 600 G1. With a i5 4590 CPU. The BIOS version it has is from 2014 and the latest version available in HP support page is 2020.
In this case is necessary Updating the BIOS and why? Thanks 🙏🏻
Hello Cayo,
You update the bios principally for security updates that patches up vulnerabilities. The other reason(s) is to get new features, (this is more for older computers), that allow you to use let's say with new/not so common operating systems.
Hope it helps
Thanks for the comment!
i want prodesk 600 g1 all driver plz help
@DAVE really thanks bro
My MAC address lost after update is shows ff.ff.ff.ff.ff.ff now I am unable to use ethernet lan how to get back this