How To Unclog a 3D Printer Nozzle | 2 Easy Methods to Clean Out a Clogged Nozzle On Ender 3
HTML-код
- Опубликовано: 2 окт 2024
- In this video, I go over the 2 best ways to unclog your 3D printer nozzle - at least that I've found. Owning a 3D printer isn't just about printing its also taking on the hobby of working on a 3D printer. Issues with your printer aren't about "IF" it happens its a matter of "WHEN" it happens. Clogged nozzles/extruders are one of the most common 3D printer issues, but luckily it is a relatively easy issue to fix.
For this demonstration, I do use my Ender 3 to show you the process of cleaning and unclogging these nozzles BUT that doesn't mean that you have to have an Ender 3 to do either of these processes.
Disclaimer: My nozzles are all metal. Some hotends are lined with teflon so I advise that you are aware of your nozzle type before you try these methods.
Things I use in this video to unclog my nozzle:
eSun Nylon Filament: amzn.to/3FHnSAt
-----
What Else I use:
----
3D print Slicer I use:
ultimaker.com/....
My Cura Slicer Setting Video:
• My Cura Profile Settin...
3D Printers I own and recommend:
FDM Printers
Creality Ender 3:
amzn.to/2OKFHJO
Creality Ender 3 Pro:
amzn.to/3vetq11
Creality CR-10s:
amzn.to/3l4nQK4
SLA Printer
Anycubic Photon:
amzn.to/3qXcCZh
Wash and Cure Station:
amzn.to/3bWY5bF
Ender 3 and Ender 3 Pro Upgrades:
Glass Bed:
amzn.to/3czNgvx
Capricorn Bowden Tube:
amzn.to/2PTjN83
Ender 3 Pro Silent Motherboard:
amzn.to/3epNuHR
Tools I use for 3D Printing:
Get Perfect Bed Level:
amzn.to/38tDsBR
Glue Sticks for Adhesion:
amzn.to/2PO54uV
Small Plyer Set to Remove Supports:
amzn.to/3rC1a6u
Follow Me on Instagram: / itsmeadmade
Website: www.itsmeadmade...
Music from: www.bensounds.com
#3dprinter #maintenance #3dpainting #3dprinting #troubleshooting
DISCLAIMER: This video is not sponsored. Some of the links are affiliate links in which I will receive a small commission.
Absolute legend this has been my issue with my printer for so long. Thanks so much, also this deserves a sub!
i have this problem now, i got my ender 3 a few days ago and it was working fine on the first day and now nothing is sticking to the bed and some of the filament is curling when coming out of the nozzle and alot of people said its clogged so i will try this and i hope it works
I have the same issue. I will try cleaning this and update you if it works
@@stonnyj yes please
same, first few prints were fine, now it clogs and won’t stick to itself or bed, trying different temps for nozzle and bed, still working on it.
@@MegaTapdog im still having the same problem i tried glue to help adhesion and ngl it works well but not all the time
If it is not sticking to the bed try cleaning your hot bed
Bro when I try to shove it in on my ender 3v3 ke and by pressing the button it WONT EVEN EXTRUDE😭! Idk what to do.. Thank you
The trick worked well for my ender 3. Thank you for shearing. I have another issue. One of my spool of black PLA starts sleeping from the extruder and the print is not completed as the filament doesn't extrude. Other filaments work properly. Is it the issue of filament ?
Thank you so much all the other videos rush though it and not even do it
Hello, I thought I fixed my clogged nozzle. By this I mean I replaced nozzle with new one and trimmed end of boden tube in hot end. When I put it all back together, I was able to push filament through. Then I went to print and it clogged again. Nothing came out of nozzle, 😮 ugh! 😫 What can I do to fix this?? Please help
Nice job. I've never done a cold pull.
I've been lazy and if I get a clog I usually back the filament out a bit. Heat the nozzle to 250 and shove the needle up the hot end and then let it sit at 250 for a few mins.
Then I'll go ahead and try to push some filament out at 250 and if it looks good I let it cool down and try printing again.
Worked pretty good for me so far, but I probably need to tear it down and do a good cleaning on it.
I use that GST3D filament like you have and I find that filament can sometimes be pretty inconsistent in size, but for the price is worth the little extra hassle once in a while.
Yeah that GST3D is what caused that. I used it on all my printers and after three spools on each they all started clogging. So I threw out the rest of that filament to many impurities in it that clog nozzles. I did some digging and it happens a lot with them. Not a fan so I switched back to my old faithful Inland brand. Stuff is cheap and it prints great.
@@ItsMeaDMaDe I'll look into Inland. I've only got a few spools of GST3D left.
I can't complain too much. I had 20 spools of it. Only had 2 series clogs where I had to replace the nozzle. Then the rest have all just been heat it all up and melt it all out.
@@Psywar30 I’m glad you had better luck with it. All printers act differently. I know I have two ender 3 pros. Same model and one heats up hotter than another one.
This doesn't really work on a Ender 3 v2. Every time I try and pull out the nylon filament after its cooled, it breaks off. What am I doing wrong? Please help. Thanks!
Where did you get that Blue-Gear-Shaped knob on top of the filament feeder (at 21:30) would that work on the Ender 3 Max Neo.... that looks really handy! did you print that or buy it? thanks
On the cold pull are you not supposed to keep it at 90° for PLA and 110° for abs so not to damage the hot end?
I just put a new hot end on elegoo 3D Printer. I’m still having trouble getting filament out of the hot end. I’m using elegoo 1.75 filament. Any Suggestions!
Nozzle that came from the box doesn't fit and is not sharp at all. 🤬
Would the cold pull work with a petg filament?
PLA will degrade when cooling down? What??
Is the cold pull method safe to do with a direct drive extruder as well? I feel like that might be an issue.
I have to be honest I’ve never done it on my direct drives. I am on your side I feel it’s probably not the best way.
Unscrew your gear drive tensioner then Bring your temp to zero then bump the temp up to 120 when you get to 90 start lightly tugging it as it heats up until it comes out!
Rather than put so much strain on the print head and risk bending it out of tolerance, I'd just toss a bunch of clogged nozzles in a 450F oven to heat them up, use pliers or vice grips to hold them, insert filament, let them cool, and then do the cold pull. Plus doing them in batch can likely save time instead of one at a time.
Hey Chuck i just subscribe 👍 so now you have a student from Holland Amsterdam to 🤗
So cool! Thanks for the sub!
you can print bowden tube clips really fast if you break yours, no need to order new ones
I never received a nozzle cleaner in the ender 3 box
You wouldn’t it’s something extra you have to buy.
Did he say what that Styrofoam like material was?
Thankyou for the video, this helped me alot
What about hot ends with PTFE? I'm familiar with cold pulls but I hadn't heard to use nylon before. Wouldn't that be a problem for people who don't have full metal hotends? If so, might want to mention that.
Yeah you make a good point. I am using all metal hotends. I guess I’m running under the assumption that people using PTFE “ teflon lined hotend” already understand the hot end temperature limitations. But your right I’ll put it up in my description and pin this comment.
And not all PTFE lined hotends have the lining in the hot zone. So it’s really up to the user to understand the hotends they are using.
Thanks for the input I do appreciate it
I did this step by step but the esun nylon keeps snapping off (even when a little is put in) when I’m trying to pull it out I now have it stuck in the nozzle and hot end making a small block huge…any suggestions would be appreciated ✨💕
The nylon is saturated dehydrate it in the over. Look up how to dehydrate wet filament nylon gets brittle when it sits and since it's not used for printing the quality on packaging and water proofing is less
Good to know this for when I get my printer
Well I hope you have it a good while before you need this information 😅
Forgot to mention I’m thinking about creating a 3D printing basics series everything you need to know when starting. Would that be something interesting to you? Seems a lot of people are getting into the hobby which is great. Figured I might be able to help.
very helpful thank you
Thanks Buddy !!
Very helpful tips!
Awesome one of those good to knows but never want to get clogs and have to do it. 😅
This is real world problems im currently dealing with it as i speak lol
He struggle is real. Sorry your having issues hope this video helped you.
wow
yeah i stopped after all the bad editing :S so annoying to watch
No one cares. Bye
Lol, there's a first world problem if I ever heard one