Everything You Need to Know About the Longmill MK2 48x30 and Extension Kits
HTML-код
- Опубликовано: 21 июл 2024
- We’ve had so many questions about the soon-to-be-released LongMill MK2 48”x30” Extension Kit that we interviewed Sienci CEO, Andy and Mechanical Engineer, Daniel to get the scoop on some of the cool new features that the MK2 Extension Kit has for all your CNC’ing needs.
Find out what went into creating a bigger, stronger LongMill, how much the new Extension Kit will cost, and even how shipping will change with the larger CNC.
Read the full article here:
sienci.com/2022/02/24/everyth...
Chapters:
0:00 What is this video about?
0:40 Quick run down about the upgrades
01:43 Main challenges of developing a wider LongMill
02:38 What do the extension kits come with?
04:12 How hard is the extension kit to assemble?
04:47 How much do the extension kits cost?
05:26 Shipping timeline
05:45 How will the new machines be shipped?
Know the LongMill MK2
sienci.com/product/longmill-mk2/
▸ LongMill Add-ons
Dust Shoe l Sienci Labs
resources.sienci.com/view/lm-...
TouchPlate l Sienci Labs
resources.sienci.com/view/lm-...
▸ Resources
LongMill Resources Page l Sienci Labs
resources.sienci.com/view/lm-...
Feeds & Speeds l Sienci Labs
resources.sienci.com/view/lm-...
Toolchain Software Helper l Sienci Labs
resources.sienci.com/view/lm-...
Checklist Poster
bit.ly/checklist_LongMill_Sie...
// PROJECT IDEAS
▸ resources.sienci.com/view/lm-...
// JOIN US
▸ Facebook Group | / mill.one
▸ Instagram | / siencilabs Наука
I love this size and the fact that it can pass an entire sheet through its awesome
I can not wait to get my Longmill!!! This is going to be AWESOME. 👍❤
Awesome news!!
I have my longmill mk2 on pre-order seriously considering changing the order to this size. Only that I need it now and this won't be ready until July
This is awesome! Love my 30/30, but may do this upgrade in the future!
Nice to hear that Caleb!
So happy to find this cncmachine
What is the lead on those 12mm lead screws? :)
How much gantry move when motor turns screw 360 degrees? :)
They're 4-start, 2mm pitch equalling 8mm lead
I enquire about modifying my longmill V2 30 x 30 to 48 x 30 version Iwas told there is no kit please confirm whether that is available now o the total cost including fright to Oman Please give a list of all the parts the Kit will contain
Hi Ahmed, we have extension kits for the MK1 and MK2 30x30, I've linked to our store page here. sienci.com/product/48-x-axis-longmill-extension-kit/. You can get an estimate shipping rate at the checkout before making a purchase.
Will you have 48*48 options ever ?
Hi Jav! At this current time, no. There are a couple of engineering and logistical challenges extending the Y-axis. One of the biggest reasons is that it is difficult to purchase a 6ft x 6ft sheet which the machine would have to sit on at the 48×48 version. Part of the reason we chose a 48x30in working area is because the machine can sit on a 4ft x 6ft sheet (basically a cut down 4ft x 8ft sheet). To accommodate a 48×48 version, we would need to build a custom table as well, which is currently not a priority in development.
Please feel free to read about the AltMill in our blog (sienci.com/?s=altmill). There is no set expected release date for the AltMill, but it is likely to be in the middle to end of this year.
@@SienciLabs Thanks I was just looking forward to making LARGE designs like Rounds, shiplap, and not do the stop the design push it through start the cut again push stop push it through .... Great work on New Design !
Too bad Y axis lead screws aren't on outer side...this way it will be covered in sawdust pretty quick. :)
But overall nice machine. :)
The amount of dust is actually very low, especially if you have a dust shoe on your machine. In case you're still worried though we have dust covers that go overtop the screws on both sides that nearly fully seal them off: sienci.com/product/longmill-mk2-lead-screw-dust-shield/
@@SienciLabs great. :)
Very good point
Lol I like your 🎤 hammer
Have you guys got rid of the stupid masks .? Nice video
People wear masks if they want to otherwise they would be deprived of their freedom
Ditto on the masks.