This is such a great build. I am seriously considering purchasing this frame. Could I ask you to measure the distance between the lowest point of the cab rocker pinch weld to the ground? And what size are your tires? Just trying to get an exact ride height figure. Thank you in advance!
Wearing a 4 point harness just says “Follow me officer, I’ll do something stupid soon”. Great truck, I loved it. Jonathan Ward could not have done it better.
Just not the right quality despite of what he is claiming. There is just not enough travel in the suspension for that. You can see them bouncing around because of to high spring rate my guess.
What a sweet ride you nailed it on all corners, perfect stance not all squatted down like to many you see and the new Wheels and rubber blend perfectly, hugs the corners like a sports car with the convenience of a truck without having to worry about door dings....Nice! ✌️
Contrary so popular belief well designed sport suspension is not bouncy like on this truck. It does not have enough suspension travel and too much spring rate probably
Thank you for the amazing video, this was more exciting than watching a new sports truck commercial. Amazing build, truly amazing to see that old style Chevy PU performing the way it did.
Remember that the LT5/10L80 drivetrain has traction control built into the logic of the system. GM's engine technology is torque based, so any of the connect 'n cruise packages come that way. I have two of their frames and all I can tell you is it's the way to roll.
Outstanding! And the Cupholder, that is just insane. You guys just think of everything, don't you! I'd personally prefer a Three Pedal setup, but everybody has their own thing, so I hope they enjoy the hell out of it, and drive the wheels off of it!
I like manual transmissions too but I kept it column shift automatic to make it more comfortable for a third passenger and so my wife would be willing to drive it too.
What an incredibly built c-10 I’ve had 4 of those trucks and I’m positive none rode the way that truck did, I hope to someday be able to afford a chassis for my Dads 57 belair Chevy 2 door.
What an amazing video. Well produced with everything you want to see about a car/truck and nothing else. You fully captured the essence of this vehicle.
Too top this project brother!!! Here in Brazil we also have a Chevrolet C-10 model. Not like this one and not with this kkkk engine. I would love to see some of our C-10s here in Brazil at the Roadster Shop being completely prepared by you with a high level of quality and without a doubt an excellent taste. I don't remember seeing or that anyone saw any vehicle defect or detail to be filled in or removed.
WOW! We have these C10's as right hand drives in South Africa. Would the same specification chassis work in a SA spec right hand drive set up? This is pretty much my dream ride.
What is the gear ratio in the rear end? I just bought an LT-4/10L90E out of a 2018 Camaro ZL1 and am trying to figure out what ratio would be best. 1970 CST
:05 - I’d LOVE to feel some of the “neck breaking” in a C10 😎💥💪🏼. What did you have to do to make that 10 speed trans hold the power? At what stall? Thank you!
It is the OE 10L90 transmission that comes in the ZL1 Camaro. That is 650 hp and right now, the engine is at 750, so not much more than the factory application. It is using and OE converter at OE stall.
How hard would it be to get a chassis like this? I have a 67 c10 that I would love to just transfer everything over and have it all done professionally.
Chassis is nice but afterwards you are maintaining a race car not a genetic truck where parts are plentiful. That's what's kept me from doing it. Each to there own I suppose
Hey RoadsterShop, give me the skinny on the roll top tonneau cover on the back. Would really like to get one of those for my ‘65 C10 build if possible. Your design or another company’s off the shelf product?
Yes it is. It would end up being a custom piece as you might imagine. Typically we want the actual vehicle in the shop so we can 3-D scan it to design the chassis against. Drop us a line if you'd like to learn more - one of the sales guys can explain the full process (847-949-7637) ... Or you can watch our custom chassis video! >> ruclips.net/video/NWAe-3sQoGQ/видео.html
Ive been trying to find these rims until I saw this video and looked it up and realized the price was 1500 a piece 😂 . How is a 16 year old who works for his dad supposed to afford them? One day…
@@northernbel1974 Not here...which is why GM makes emissions legal "E-Rod" drivetrains. So you can put emissions constrained modern motors in older or different vehicles. Technically you can do an LT5 if no one knows. That's why we have turbo Hondas on every street corner in So Cal.
Ya, not a cheap toy...... AT ALL. But..... is it worth it? Well, to me yes. It'll have character for 10, 30 or 40 years more, that is until we are flying everywhere in free energy vehicles daily......
Thanks for the suspension shots, and the ride height is perfect.
This is such a great build. I am seriously considering purchasing this frame. Could I ask you to measure the distance between the lowest point of the cab rocker pinch weld to the ground? And what size are your tires? Just trying to get an exact ride height figure. Thank you in advance!
Wearing a 4 point harness just says “Follow me officer, I’ll do something stupid soon”. Great truck, I loved it. Jonathan Ward could not have done it better.
No no that's C8 Corvette owners
In UK we don't require seatbelts in that year truck and officers cant say anything
Wheweeeee! That is one fine truck. Well done, RS!
Thanks!
Wow, nice... you could probably build 50 copies of this truck and sell every one before you started 👍
I will buy one if you guys build it!
Agreed
Lol yea right the. Chasis alone in 15-20k engine trans diff wheels suspension and supporting mods for 750hp plus labor would put you about 70k-80k
@@jrobles1019you’re assuming people care about debt, which they don’t seem to anymore
@@jrobles1019 people are buying that much for a base ram these days lol
Finally discovering the greatness of independant suspension for American builders was like discovering fire...
That truck looks so good, the stance, the wheels, the power, it is awesome.
Just not the right quality despite of what he is claiming. There is just not enough travel in the suspension for that. You can see them bouncing around because of to high spring rate my guess.
That is one of the coolest trucks I've ever seen!!!! Awesome!!!!
fav c10 build ever, great job !
That's a perfect setup works together fantastic anyone would be proud to own that truck 🤙 🇺🇸
That's an amazing chassis from ride height to body roll this chassis and truck are sick!!!
What a sweet ride you nailed it on all corners, perfect stance not all squatted down like to many you see and the new Wheels and rubber blend perfectly, hugs the corners like a sports car with the convenience of a truck without having to worry about door dings....Nice! ✌️
Contrary so popular belief well designed sport suspension is not bouncy like on this truck. It does not have enough suspension travel and too much spring rate probably
I'm in love what these brothers do.
My favorite build of yours. Well done crew. This thing is so amazing. Hope to see it again soon.
Awesome truck guys
Thank you for the amazing video, this was more exciting than watching a new sports truck commercial. Amazing build, truly amazing to see that old style Chevy PU performing the way it did.
You along with many others have inspired me to commit and build a truck unfotuently not to this caliber but enough to gain respect. Love the truck
Amazing!! Thank you!!
Gorgeous truck!
Great work Roadster Shop 🥇
C30
❤❤❤❤❤❤
Remember that the LT5/10L80 drivetrain has traction control built into the logic of the system. GM's engine technology is torque based, so any of the connect 'n cruise packages come that way. I have two of their frames and all I can tell you is it's the way to roll.
I just subscribed...
Outstanding! And the Cupholder, that is just insane. You guys just think of everything, don't you! I'd personally prefer a Three Pedal setup, but everybody has their own thing, so I hope they enjoy the hell out of it, and drive the wheels off of it!
I like manual transmissions too but I kept it column shift automatic to make it more comfortable for a third passenger and so my wife would be willing to drive it too.
@@northernbel1974 Yeah, you do have to pay attention to the Wife equation! Careful though, she may take a liking to it.....
What an incredibly built c-10 I’ve had 4 of those trucks and I’m positive none rode the way that truck did, I hope to someday be able to afford a chassis for my Dads 57 belair Chevy 2 door.
That is the best truck I have seen, top job, wicked everything. I want! 🔥🔥🔥
Damn I absolutely love the stance of that beautiful truck 💪🏼💪🏼🇺🇸🇺🇸🦅🦅
More videos
More Videos
MORE VIDEOS
I love what you guys do.................love the videos of the projects! THANK YOU!
Clean C10
It's Tight
Serious sleeper mode
What an amazing video. Well produced with everything you want to see about a car/truck and nothing else. You fully captured the essence of this vehicle.
That is simply gorgeous
Awesome truck!
The black keys was a nice touch🤌
awesome truck
Very cool........................... 👍👍👍👍
OK, great ruck.....but how do I get one of those cool phone holders for my ash tray?
Magnifique travail toujours aux top 🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼
You guys said this has abs brakes??
Beautiful Truck Wish I Could Have!!!!!!!!!!
Too top this project brother!!! Here in Brazil we also have a Chevrolet C-10 model. Not like this one and not with this kkkk engine. I would love to see some of our C-10s here in Brazil at the Roadster Shop being completely prepared by you with a high level of quality and without a doubt an excellent taste. I don't remember seeing or that anyone saw any vehicle defect or detail to be filled in or removed.
Are they right hand drive? They sell for big money here in uk
RS, crushing it as usual.
Will a harness bar be available on the website and the ash try cup holder ?
*Lotto TONIGHT!*
interesting how the rear toe changes when under power ( see 2:57 ). I wonder what that feels like?
The stance is perfect. I gotta stop watching these before i show up in Illinois with 71 Firebird
This is a dream truck except for the blue interior. I would love a black one instead.
De lo mejor en calidad
Oh yeah!!!!!!!!
Is that phone holder available?
Our goal is soon. Stay tuned on the social channels.
WOW! We have these C10's as right hand drives in South Africa.
Would the same specification chassis work in a SA spec right hand drive set up?
This is pretty much my dream ride.
Love it
I’ve got a patina C10 that will be like this one day.
What is the gear ratio in the rear end? I just bought an LT-4/10L90E out of a 2018 Camaro ZL1 and am trying to figure out what ratio would be best. 1970 CST
3.09
Can the 10 speed auto be combined with any LS or LT crate, specifically the LS427/570?
LT5 is the crate GM motor w/ a supercharger right? You can hardly hear it!! Mean it sounds almost normally aspirated.
Can I say Bit Chen on the interweb?
We'll allow it.
@@RoadsterShop : )
:05 - I’d LOVE to feel some of the “neck breaking” in a C10 😎💥💪🏼. What did you have to do to make that 10 speed trans hold the power? At what stall? Thank you!
It is the OE 10L90 transmission that comes in the ZL1 Camaro. That is 650 hp and right now, the engine is at 750, so not much more than the factory application. It is using and OE converter at OE stall.
I love the truck! Can you tell me what air conditioner you used that allowed you to use the original controls?
Vintage Air
How hard would it be to get a chassis like this? I have a 67 c10 that I would love to just transfer everything over and have it all done professionally.
That’s exactly what this is. Call RS and order the chassis and ask when they can fit your truck into their schedule.
That's exactly what we do - Give us a call - 847-949-7637
Chassis is nice but afterwards you are maintaining a race car not a genetic truck where parts are plentiful. That's what's kept me from doing it. Each to there own I suppose
Its $15K. Just get QA1 coilovers.
😎😎😎😎👍🏾👍🏾👍🏾👍🏾👍🏾
Did you say "ABS"
Got some Yank...... Very nice truck I could stand one just like it.
where can i get the ashtray with the phone holder?🔥
Hey RoadsterShop, give me the skinny on the roll top tonneau cover on the back. Would really like to get one of those for my ‘65 C10 build if possible. Your design or another company’s off the shelf product?
I believe that was a piece we modified to work with the truck.
Badass
Best
Is it possible to create a chassis like this for a 1st gen Toyota Sequoia and 1st gen Toyota Tundra double cab?
Yes it is. It would end up being a custom piece as you might imagine. Typically we want the actual vehicle in the shop so we can 3-D scan it to design the chassis against. Drop us a line if you'd like to learn more - one of the sales guys can explain the full process (847-949-7637) ... Or you can watch our custom chassis video! >> ruclips.net/video/NWAe-3sQoGQ/видео.html
@@RoadsterShop thank you for your time I can’t wait to get it started
Aloha
If this program were in Spanish, I would be very happy
IRS on a 4 wheel drive lifted truck next?
What the built cost Jeremy?
Unfortunately, we do not share what our customers paid to have their cars built with us.
@@RoadsterShop Thanks Jeremy I assumed it was yours..you guys are the best!!
Easy to do the math. $20K chassis plus labor. $20K engine and tranny plus labor. In the end its probably a $75K geezer rocket.
@@RoadsterShop Understood 👍🏾
That’s one bitchin C-10!
Any idea what tonneau cover that is? Im looking for a similar one for my truck. Thanks!
It was adapted to this truck using a custom fixture.
Damn, Ive been looking for one too.
Do you sell the pop up phone holder?!
Let me know if the truck is for sale? Or when you put it up for sale.
Ball park $$$ for building me one.
Like that particular c10 68.
Thank
4:13
What wheel and tire set up is on the truck?
Could you tell me what seat you guys used in this?
It's a custom unit.
The blue patina is sexy. Is that the original paint?
Yes, except for the bed sides
where can i get that seat? like for real!
Where can i buyy that bench seat??? Thanks
What tonneau cover is that?
custom piece adapted to this truck.
What brand are the wheesl
Forgeline
That is a bad machine!!!
No C-10 is complete without a crooked aftermarket AM/FM antenna
Since this video I removed the antenna to lower the wind noise on the interstate. It just has a plug where it used to be now.
How much yall selling it for?
$90K.
Let me borrow that:)
Ive been trying to find these rims until I saw this video and looked it up and realized the price was 1500 a piece 😂 . How is a 16 year old who works for his dad supposed to afford them? One day…
Gotta have something to aspire to!
Where can I find that ashtray phone holder. I can't find it on your instagram
$125K Geezer Rocket.
Where is running the LT5 legal...sure isn't California. Someone lives in a lucky state.
I think it’s legal everywhere in a 1967.
@@northernbel1974
Not here...which is why GM makes emissions legal "E-Rod" drivetrains. So you can put emissions constrained modern motors in older or different vehicles.
Technically you can do an LT5 if no one knows. That's why we have turbo Hondas on every street corner in So Cal.
@@ZEPRATGERNODT Just 1 more reason to leave that state....
It's legal here in California for sure. The truck is smog exempt. I believe the last year to do smog was 76. Don't quote me on that one.
How much?
A bunch...
Ya, not a cheap toy...... AT ALL.
But..... is it worth it? Well, to me yes.
It'll have character for 10, 30 or 40 years more, that is until we are flying everywhere in free energy vehicles daily......
I still kick myself daily for sell my 68 years ago.
I listen to people who say this and it stops me selling my 69. Especially here in uk where it's hard to get another
100K+ truck