I like your idea of using the hard wood inner 3rd section for inserting the weights and as a solid anchor for the hook and tie rings. Haven’t seen that before. Another great lure! Thanks for sharing. 🙂. The suction cup was another creative idea. Curious why you chose to seal the lure after inserting the suction cup as opposed to sealing first? 🤔🤔
Thank you very much. I would like to introduce various lures in the future🙂. The reason why I sealed the suction cups before installing them is to make the wood more waterproof. The surface of the lure is coated in the last process, but the area around the mouth and the suction cup can be difficult to coat. Therefore, I thought that applying adhesive to the back of the suction cup would make it more waterproof.
Yaa-! Haru san. Thank you very much for another fine video. I have two questions: 1. Why did you use a center layer of harder cypress, sandwiched between two layers of balsa? 2. Did you try this lure WITHOUT the suction cup in the front and compare the pop and splash of both versions? Please keep up the great work.
@@MarcosMVlures Thanks, Marcos. That makes perfect sense. I completely forgot that most-if not all-of Haru's balsa baits have through-wires. That was silly given how many of his videos I've watched!
Thank you for your question. Since the first answer seems to have already been answered correctly, I will answer the second question. I have never used a suction cup-less popper, so this is just my prediction, I think it will probably work like a short length pencilbait.
I really like the sandwiched approach in adding lead. The smelly lead pot can't be good for you. To do it right, you will have to add ventilation (vent to outside).
Thanks for the question. I don't have any experience in making a balsa wood only, but if you do make the popper from balsa wood, I think you will need to add some weight, because balsa is highly buoyant. In addition, balsa wood is very soft, so you will need to embed dowels to attach screw eyes.
Thanks for the question. I am using these bait tackles. It is a short fishing rod, so I can easily manipulate the lure. *Rod: Shimano, Scorpion 1581-F. *Reel: Shimano, SLX-MGL_70HG. *Line: Sanyo-Nylon, Super GT-R 12lb.
I thought this was cool too. I’ve seen some of his other videos where he shows how he folds the paper and cuts off the end to make the epoxy dispenser. Check out some of his earlier lures. 🙂
I just remembered. I made a video a few years ago showing how to make paper cones. I plan to make a higher quality video, but I think you can find the old video useful as well. *Make the Prop RED FIN (about 3 minutes and 50 seconds in): ruclips.net/video/C9DOF4JaWvA/видео.html .
Thanks for the question. I made this eye screw by hand using soft stainless steel wire. If you have a round nose pliers and pliers, you can probably make it in about a minute. *For more detailed instructions on how to make the eye screw, please see this video (about 6 minutes and 22 seconds in) : ruclips.net/video/uK1LKW9sJ2g/видео.html .
Thanks for the question. The brands I use are "Nagashima" and "Mr Hobby (Mr_Color)". Mr_Color is originally designed for model painting, so I think it's easy to find in hobby stores. On the other hand, Nagashima's epoxy coatings may be difficult to find outside of Japan, unfortunately. Therefore, you will need to look for an epoxy coating agent that is sold for coating fishing rods. Here is a link that may be helpful. *Mr_Color website: www.mr-hobby.com/en/product1/category_7/87.html . *Mr_Color(Shopee): shopee.com.my/search?brands=1146782&keyword=mr.color&noCorrection=true&page=0 . *Nagashima's website: www.nagashima-manbou.co.jp/shop/index/4#item16 .
THE LEGEND HIMSELF IS BACK
Awesome build thank you for sharing. Tight lines and stay safe
love your videos. excellent craft ideas.
Introducing me an angler from Indonesia, your video is good and I like it. Nice to meet you 😁👍
Good job nice bass
thank you for sharing and good health to you and all your family
Better than a store bought one!
A beauty lure!
Very creative...as always 👍👍👍
Excellent work
awesome job, greetings from argentina
I like your idea of using the hard wood inner 3rd section for inserting the weights and as a solid anchor for the hook and tie rings. Haven’t seen that before. Another great lure! Thanks for sharing. 🙂. The suction cup was another creative idea. Curious why you chose to seal the lure after inserting the suction cup as opposed to sealing first? 🤔🤔
Thank you very much. I would like to introduce various lures in the future🙂.
The reason why I sealed the suction cups before installing them is to make the wood more waterproof. The surface of the lure is coated in the last process, but the area around the mouth and the suction cup can be difficult to coat. Therefore, I thought that applying adhesive to the back of the suction cup would make it more waterproof.
@@haru834 Great! Thank you sir. 🙂
,
Yaa-! Haru san. Thank you very much for another fine video. I have two questions: 1. Why did you use a center layer of harder cypress, sandwiched between two layers of balsa? 2. Did you try this lure WITHOUT the suction cup in the front and compare the pop and splash of both versions? Please keep up the great work.
I think it is because he doesnt use through wire. In balsa wood fish could just rip out screw eyes. In hard wood they will hold up to it.
@@MarcosMVlures Thanks, Marcos. That makes perfect sense. I completely forgot that most-if not all-of Haru's balsa baits have through-wires. That was silly given how many of his videos I've watched!
Thank you for your question. Since the first answer seems to have already been answered correctly, I will answer the second question. I have never used a suction cup-less popper, so this is just my prediction, I think it will probably work like a short length pencilbait.
I really like the sandwiched approach in adding lead. The smelly lead pot can't be good for you. To do it right, you will have to add ventilation (vent to outside).
Дякую 👍 чудова наживка 👍👍👍
Sangat menikmati tutorialnya ...
kren senior penuh kreatifitas tinggi
terimakasih
Yes , finally.👍👍👍👍😊
Ese lente muestra me a gustado mucho 🙏🙏
Only problem…maybe do not put your camera on the scroll saw table. A little hard to watch. Still a great video brother.
Amazing 👍👍👍
Bellissima. Il legno di Balsa va bene ugualmente? Se si usa la Balsa il peso dei piombi è uguale o bisogna diminuire?
Thanks for the question. I don't have any experience in making a balsa wood only, but if you do make the popper from balsa wood, I think you will need to add some weight, because balsa is highly buoyant. In addition, balsa wood is very soft, so you will need to embed dowels to attach screw eyes.
Paz
Mais uma isca espetacular
Assim que conseguir a madeira vou tentar faze - lá
Parabéns
Привет блогадору за видео зачёт удачу вам...,👍👍👍👍👍
What’s your bait caster rig? Reel, rod, & line. Thanks
Thanks for the question. I am using these bait tackles. It is a short fishing rod, so I can easily manipulate the lure.
*Rod: Shimano, Scorpion 1581-F.
*Reel: Shimano, SLX-MGL_70HG.
*Line: Sanyo-Nylon, Super GT-R 12lb.
Show, show de bola meu amigo. 👏👏👏👏😲😲
Again another great video. I have asked before, can you make video on how you make your glue dispenser, I think it is brilliant
I thought this was cool too. I’ve seen some of his other videos where he shows how he folds the paper and cuts off the end to make the epoxy dispenser. Check out some of his earlier lures. 🙂
I just remembered. I made a video a few years ago showing how to make paper cones. I plan to make a higher quality video, but I think you can find the old video useful as well.
*Make the Prop RED FIN (about 3 minutes and 50 seconds in): ruclips.net/video/C9DOF4JaWvA/видео.html .
@@waterdoglures1352 Thanks for the message. I had completely forgotten that I was making paper cones, but reading your message reminded me. Thank you.
@@haru834 You’re quite welcome. I learned it from you. 🙂
Thankyou but a more detailed video showing how you shaped the paper etc would be fantastic
Hay quá bạn ơi, chúc bạn thật nhiều sức khỏe
Haru-san, That eye screw is hand made?
Thanks for the question. I made this eye screw by hand using soft stainless steel wire. If you have a round nose pliers and pliers, you can probably make it in about a minute.
*For more detailed instructions on how to make the eye screw, please see this video (about 6 minutes and 22 seconds in) : ruclips.net/video/uK1LKW9sJ2g/видео.html .
Qual o aerografo que você usa,03 ou 05?
O meu entope muito muito eu uso um 03
Thanks for the question. I am using a 0.3mm airbrush.
💯👍👍👍
When do you want to make a jumfrog lure
can i get that epoxy and all paint you use on shopee? can u give a specific brand?
Thanks for the question. The brands I use are "Nagashima" and "Mr Hobby (Mr_Color)". Mr_Color is originally designed for model painting, so I think it's easy to find in hobby stores.
On the other hand, Nagashima's epoxy coatings may be difficult to find outside of Japan, unfortunately. Therefore, you will need to look for an epoxy coating agent that is sold for coating fishing rods.
Here is a link that may be helpful.
*Mr_Color website: www.mr-hobby.com/en/product1/category_7/87.html .
*Mr_Color(Shopee): shopee.com.my/search?brands=1146782&keyword=mr.color&noCorrection=true&page=0 .
*Nagashima's website: www.nagashima-manbou.co.jp/shop/index/4#item16 .
@@haru834 Thank you sir 🙏👍
Respect!
Felicitaciones
ポップ音が、柔らかい感じがしますね。
ありがとうございます。今回は音を控えめになるように作ってみました。まだ制作はしていないのですが、大きなカップを使うと、大きなスプラッシュやポップ音が出せるようになるかと思います。
Super!!!
Like 👏👏👏 super 😉 👍🇺🇦.....
👍👍👍💪
I want one for cast snakehead
テンプレートを公開してくれると嬉しいな。
コメントありがとうございます。この動画で使っているテンプレートは、こちらのGoogleドライブからダウンロードできます。用紙の左下にある定規を目安に印刷していただくと、原寸大のテンプレートになります。
*吸盤ポッパーのテンプレート: drive.google.com/file/d/1ksSrG3Gt6VrMhwhC2pcdNb2CToMpip3q/view?usp=sharing .
@@haru834 ありがとうございます。とても嬉しいです。これからも、動画楽しみにしています。
どんなポッパーより釣れそう
tutorial make a poper sir
Showwwwwwwwww!!!!!
👍👍👍👍⭐️⭐️⭐️⭐️⭐️🐠🐠
Like👍👍
Сделаю обязательно.
Smith. ?????
🐟🐠🐡🦈🐬🐋🐳
🐟🐠🐡🦈🐬🐋🐳