Vacuum Operated Wastegate/Turbocharger Setup
HTML-код
- Опубликовано: 27 авг 2024
- Turbocharger setup for a turbocharger that has a vacuum operated wastegate found on Mini Cooper, Peugeot and Citroen (with THP engine) and some BMW cars.
#minicooper #BMW #mini #upgradedturbo #turbocharger #needforspeed #boost #turboupgrade #couple #countryman #clubman #hightorque #jmtcperformance #jmtcreplacement #jmturbocoopers #n14 #n18 #n12 #n16 #n20 #n42 #N43n #N43 #N46n #e81 #e87 #e82 #e88 #e21 #e46 #e90 #e90 #e91 #e93 #e92 #f30 #f31 #g34 #f35 #207 #MiniOne #308 #C3 #C3Picasso #DS3 #208 #207 #2008 #308 #3008 #508 #C4 #DS3 #DS4 #C3 #C3Picasso #207GT #RCZ #DS5 #408 #408Sport #5008 #308GTi #208 Gti #3008GT
Thank you I own an 07 R56 S and have been fighting a boost robbing gremlin.. your description of operation I found to be very interesting. My code is 2885 and so far it's kicking my butt. I've been a mechanic for 40 years but these days I'm a vehicle inspector. Anyone tells you that they know it all is full of crap. I don't give up easily and I've seen so many videos trying to find answers and this on is the best.
You are welcome glad we could help, usually the valve in the turbine housing will get warn out and will rock open due to the wear. If you rock the valve front to back in reference to the car not the travel and the arm moves more than 1/8" the turbine housing will likely need to be replaced. They usually wear out starting about 60k mile and don't last over 120k miles that I have seen. Hope this helps let us know if you need more info.
Actually, the duty cycle on BMW is to control amount of vacuum to the actuator, the wastegate would not open and close rapidly, but hold in a position according the the WGDC.
Yeah i agree it is only at 3000 to 3500 that we hear the valve fully opening and closing.
Thanks for the video. It cleared up the vacuum wastegate operation for me.
Explained this for me better than anywhere or anybody else.. much much thanks ! Now I can correctly set my aftermarket turbo on my jcw
Thank you for making this video. You gave a lot of info on Mini Cooper
Thank! Exactly the information I was searching for!
This is an excellent video and explanation. Specially the safety tips. Thank you.
The best video I ever seen 🔥🔥🔥
Thank you so much, I actually closed mine all the way I hope it's not too late 😂
that might not be good unless you are switching it to a boost operated WG like on 90% of the cars out there. You can go into over boost and the car will cut fuel and open the BOV/DV.
really like this video thank you for making it
Great video! Thanks
Great video!
Isn't a specific amount of vacuum spose to be applied to fully seat the wastegate shut ???
Great video. It would be posible to have turbo lag ocasionated by bad wastegate setup.
Yes
I have a 2013 x3 bmw 2L turbo I took it to bmw dealership they diagnosed it after changing the actuator and hoses but transmission light still comes on after speeding up then no power then bmw said I need new turbo I can drive long distances on the highway don’t lose power or other issues please help??
Nice job 👍
@r56, @minicooper, great video!!.
Your video is great on point! Thanks
Opel also uses vacuum operated ones.
Yeah a lot of manufactures are going this way, so the WG can be opened when driving. With the WG open you will get better gas mileage since you are not in boost.
Very detail. My problem is my car is under boost (code P0299) and when the car is idle or off, the actuator is in a fully pull position as if the vacuum is already beilng applied (not sure if it is stuck open or close). I have to pull it away from the actuator to move toward the waste gate. Do I adjust the nut one full turn to lengthen the rod? Would that work or there is another problem?
Question turbo smart actuator using the positive pressure assistance what am I getting source pressure from manifold or t into the factory valve I’m confused because doesn’t the factory valve only pull vaccume
thanks a lot .....great work
Amazing, i just change my turbo, but this come with a restriction and i need regulate the wastegate. Regards.
What does a manual boost control do because I have a Cruze and want to get a little more boost only like a 5psi boost ,so if I have it hook up to the vacuum line on the actuator ?is my wastegate closed at idle?
Can you attach a boost controller to a vacuum operated wastegate?
Hi mate, my car is hyundai i30 1.6 diesel 2010, my turbo sounds like a siren, I have check the turbo there is no wrong with it and it, once I disconnect the vacuum line from the turbo actuator the sound go away and the turbo works fine with no issues
Is there any way that you can send me a vacuum line diagram on a 2010 Mini Cooper S?
For a BMW wastegate, how does the wastegate see vacuum while in boost to close the door further? I understand how at idle the vacuum of the engine pulls it shut and you can bleed that off by exposing it to atmospheric pressure, but what about needing to build boost back up while in boost if it's undershooting target??
The ECU doesn't monitor the vacuum pressure it monitors the intake pressure and only cycles the pressure valve to increase the open or closed distance of the valve in the turbine housing. this will change the turbo speed and adjust the pressure in the intake manifold. So the valve will remain more open or closed until the boost pressure needs to change again.
@@jmturbocoopers but if the wastegate is normally open and requires vacuum to close, how would the wastegate ever get pulled back shut to build more boost if you're already in boost? Mechanically, not from a control/ECU perspective
What if I hook up a boost wastegate to vacuum?
I have a code 2883 comes on right way after clearing I checked the vacuum like it does feel like it’s creating enough vacuum to pull the actuator but idk what to change
Great video... But no intercooler has a 10psi drop knockoff or not.
I have a 2012 mini cooper jcw. Whenever I open the flapper I get a code and low boost. But when I have it closed I get good boost and no code unless I redline the car. I have no idea what to do. I changed the boost controller and the vacuum lines and I have a diverter valve and a new wastegate on the way. I also have a new flapper coming but it's difficult for me to change it since I don't have a welder and I don't know how to weld. I'd also have to take the whole turbo out. I'm thinking I should maybe get a whole hot site assembled if I was gonna take out the turbo. And I don't want to change the turbo because it's a JCW turbo and the turbine has no play and it's expensive.
Usually when you get the 2885 error the housing is warn out, if you have over 80 to 100k miles it will likely need to be replaced.
I have a mini cooper s R56 with a THP. I notice that I have little power when I give full throttle we have tested the membrane of the turbo that works tested the vacuum hoses that all work well too I also replaced the pressure sensor but I still have the same problem ... could it be the wastegate the problem? sorry for my bad english
Noob question, please help. Internal wastegate, actuator has a nozzle, but nowhere to connect. Now where to, does a wg need boost or vacuum? Do i drill a nozzle in the charge pipe? I tried sucking on the nozzle and moved, when blow nothing, I'm confused by forums and other explanations. Thanks
Turbo is Borg Warner kp35 btw
How much should I have to pull my actuator arm out to slide over the pin with the engine running ? Should it only be a few mm to pull out the vac arm with it running and under vacuum? Thank you
Guess what in saying is that wastegate on my car closed while idle or is it open its a 2014 Chevy Cruze 1.4 l turbo and I was thinking about getting a boost controller and sticking it on the actuator vacuum line which I'm confused about what does the less vacuum cause more boost or fully open what does that do ,or if less vacuum to the actuator cause more boost is to waste gate
Hi, my wastegate is shut closed tight. The actuator is not holding pressure causing the wastegate flapper to be stucked closed. But I don't know why I am getting a P0299 underboost code. If wastegate is stucked closed shouldn't i be having overboost ? The car runs but has no power slow acceleration. Any help would be greatly appreciated. Thanks.
The ECU is programed to open the BOV/DV and reduce timing to prevent over boost. You just need to replace the turbo or housing and it will come out of limp mode.
I'm replacing the turbo core on a peugeot with the vucuum wastegate. Should I adjust the wastegate just a little bit to give it a little more boost or leave it as it is original ??
Is there a an electronically controlled waste gate I can change it to?
Hey, can you make video for the e90 wastegate rattle? What is you PERMANENT fix?
Also, how can the different types of waste gates be swapped? I have a e90 335i.
Are the garrett turbos used on mercedes diesel vacuum or boost actuated
All the ones I have seen are electronic.
What app do i use with the obd dongel
Juandre Rosslee torque app
So, an s42 is an upgraded turbo and setup at 1/2”?
a little less but that depends on how restrictive your intake is on your car. The pressure drop from a bar and plate intercooler is 5 to 8psi and on a tube and fin it is only 3 to 5pis. So you may have to adjust the wastegate because if you have a bar and plate IC the turbo will have to produce 25 to 28psi so you can get 20psi at the intake manifold (Tube and Fin would only need to output 23 to 25psi). Also the pipe that runs from the IC to the intake manifold on the R series turbo cars (excluding Countryman and Paceman) have a restriction in the pipe under the IAT map sensor that can have a similar problem. This just means that some cars have to have the waste gate adjusted so there is less travel.
What about excessive Boost
Your video was very informative i was trying to find info on vacuum controlled wastegates.
I have an issue on my car and i try to figure out whats happening...
So the car experience some lag under 2000 rpm but after i reach 3000 its asselerating rapidly, so much that if i go full throttle aggresivly i get an overboost error . If i dont get an overboost, After it reaches 260kpa (1.6bar) the pressure drops to 0kpa and stays ther for as long as i press the throtle.
I hate mini coopers because I have owned mini coopers. N14 engines were not meant to push power. 260hp before the rings pop, your pistons disintegrate, and engine ceases to live, lol.
If you know how to set it up right like I have cut weight down keep the hp around 240 and your having plenty of fun in the street it's a go kart
👍👍👍
Where does the vacuum come from at full throttle? This is about the dumbest idea I've seen from Mini/BMW yet!
It uses a vacuum pump for wastegate control and the brake booster.
@@kieranjamieson yea... leave it to bmw to complicate things that dont need to be complicated... i will never buy a german car. vacuum pump for the brake booster.. because I like slamming on the brakes as im accelerating.. please shed some light on this design..