I like the way the end rings were made. I was taught to clip with cutters then try to square the ends of the ring with the flex drive and a sanding disk. Cutting with the saw and the ends are already square. Nice technique.
I believe that anyone who can transform a formless material into something useful or pleasant (especially for himself, but also for others), feels a great satisfaction.
I should've been a jeweler. I never find this simple gold chain link necklace design in the pawn shops when I want to. I got a pawn shop owner who sells me gold jewelry for scrap prices almost. It's so cool. He doesn't charge much because I've gotten to know him but he doesn't pay much for gold jewelry when you want to sell it back lol.
COMO SEMPRE VOCÊ É FANTÁSTICO ! PARABÉNS !!! MEU SONHO É SER UM JOALHEIRO ASSIM COMO VOCÊ NUNCA DEIXE DE MANDAR VIDEOS, POIS SÃO MINHA INSPIRAÇÃO OBRIGADO !!! ABRAÇO.
What a beautiful chain and your video is great. Can I please ask what the size of the mandrel is that was in the drill, and what was the measurements of the half round wire. Thankyou
I love this bracelet. What size wire are you using and what size mandrel if I may ask. I teach chain making and would love to add this to my classes. Beautiful work. Thanks.
How would you make a chain that looks kind of square? Do you use a square gauge? I'm always curious how some necklace chain links aren't round but square.
Instead of a wraping it around a flat metal jig onto the drill like he did to create his links....make a square jig and tightly wrap your metal around that, then cut down middle and follow the same process pretty much
Pues para decapar o blanquiar los metales se usa acido sulfúrico mesclado con agua y se lo hace hervir, otra manera de limpiar es con acido cítrico . Gracias por los videos hermosos trabajos.
I can not advise you. gold has gained fame, due to its particular characteristics, which make it particularly suitable for processing. I have not met other metals that have the same advantages.
Lots of great technic I have not ever seen a chain made up in such a way what was iit you boiled it in and would it work with copper wire. Useing your technique Thank you for shareing Thank you in advance
Può succedere che in fase di montaggio il diamante si scheggi sulla cintura, è difficile ma possibile specialmente con pietre piccole. Normalmente in pietre grandi il danno è lieve e riparabile con il ritaglio della gemma.
I would pay you to let me work with you and learn this skill. I'm dead serious about wanting to learn this. I need to start buying all the tools, but have no clue how to melt a whole ounce of gold though.... Your videos are inspirational. I'm nothing in this world without any skill. :(
utilizzo un decapante in polvere da sciogliere in acqua, lo trovi in vendita dai grossisti di materiali per oreficeria, sostituisce l'acido solforico che è maggiormente aggressivo.
It's what jewelers call 'pickle', which is a mild acid solution used to clean up the jewelry after soldering. Heating up the pickle causes a faster reaction and reduced cleaning time.
I do not remember exactly I think about 2 millimeters. The thickness of the thread must be proportionate to the size of the rings, I rely on the experience, and normally I do a test with a few rings before starting work.
Наука
I like the way the end rings were made. I was taught to clip with cutters then try to square the ends of the ring with the flex drive and a sanding disk. Cutting with the saw and the ends are already square. Nice technique.
thanks i'm glad it is useful
Awesome job; and I'm loving this music, homie.
Nice work man, it turned out beautiful. I like them links a lot. Good job! Cheers!
Lots of process hard work risky then satisfaction 💞👍👍👍💞
thanks
What kind of gloves were worn while using the bobbing wheel?
Wow beautiful!! I want try it! Your workings make me think how I can make things like you. Thank you so much always. I’m big fan :)
Thank you so much
While it was only a 14k Two-tone bracelet I made, I made something super similar to this. These kinds of pieces are so satisfying to make
Player Before Z is there anything specific that's satisfying with this style of bracelet to make?
I believe that anyone who can transform a formless material into something useful or pleasant (especially for himself, but also for others), feels a great satisfaction.
I should've been a jeweler. I never find this simple gold chain link necklace design in the pawn shops when I want to. I got a pawn shop owner who sells me gold jewelry for scrap prices almost. It's so cool. He doesn't charge much because I've gotten to know him but he doesn't pay much for gold jewelry when you want to sell it back lol.
Jaw dropping! Amazing!
thanks
As always.....Love your work!
thank you
I have the same drawbench and the same rolling mill ! Really nice to work like that, Bravo
thank you
That is beautiful. I want one!
thanks, for all information you can contact info@scaffoal.it
Damn I want that it looks amazing great job
thanks
Sencilla pero bonita y bien hecha ,felicidades
gracias
COMO SEMPRE VOCÊ É FANTÁSTICO ! PARABÉNS !!! MEU SONHO É SER UM JOALHEIRO ASSIM COMO VOCÊ NUNCA DEIXE DE MANDAR VIDEOS, POIS SÃO MINHA INSPIRAÇÃO OBRIGADO !!! ABRAÇO.
obrigado
Such skill ⭐️
Such grace 🌟
Beautiful
thanks
Very elegant!
thank you
sencillamente perfecta! Como siempre. quisiera saber si el recipiente en que la hace hervir contiene ácido sulfúrico. Gracias
tiene el mismo uso, pero es un líquido decapado que tiene menos contraindicaciones, puede ver las características en el sitio en línea de Legorgroup
Really looks like yellow gold to me! Anyways great job, love it! keep-em coming!
thank you
Isn't it?
I love your work, I would enjoy having a job like this i'm currently making similar chains to this one with copper wire
thank you
Beautiful work!!!!
thanks
Woww it's amazing I want
Gorgeous bracelet!
?
thanks
What a beautiful chain and your video is great.
Can I please ask what the size of the mandrel is that was in the drill, and what was the measurements of the half round wire. Thankyou
Nice and simple love it
thanks
Very nice work as always Scaffoal!
thank you
I love this bracelet. What size wire are you using and what size mandrel if I may ask. I teach chain making and would love to add this to my classes. Beautiful work. Thanks.
Pablo???
I like you... I ADORE what you do and your ring too!!!😊😊😊
thanks
@@scaffoal 😘
Magnifique
muy hermoso, gracias
Very nice work
Lot of work sir but what a beautiful finish... kudos for ur mastery skills!
thank you
Hola buen día gracias por compartir Seve preciosa joya
gracias
Pleasure to watch the Master!
Simp
Nice work and filming. It's so romantic to watch 😍
thank you
Bravo 👏 🙌 👏 Amazing work.
thank you
How would you make a chain that looks kind of square? Do you use a square gauge? I'm always curious how some necklace chain links aren't round but square.
Instead of a wraping it around a flat metal jig onto the drill like he did to create his links....make a square jig and tightly wrap your metal around that, then cut down middle and follow the same process pretty much
Extraordinario trabajo, un arte, aproximadamente cuánto pesa esa pulsera tan hermosa?
That's my favorite Link for a chain .
Very nice. It looked like you did not solder the last o-ring to the clasp....or did I miss it?
Great great just great stuff brother
thank you
Magnifique un très beau bijoux
merci
Amazing beautiful
thanks you
Pues para decapar o blanquiar los metales se usa acido sulfúrico mesclado con agua y se lo hace hervir, otra manera de limpiar es con acido cítrico . Gracias por los videos hermosos trabajos.
gracias
what size, gauge did you make the wire?
Very beautiful. Thank you for sharing your process
thanks
Thanks for sharing
I have a question , i love rose gold the best , is it any different to work with than regular gold , or any less preshious ?
I can not advise you. gold has gained fame, due to its particular characteristics, which make it particularly suitable for processing. I have not met other metals that have the same advantages.
Beautyful obrigada 😍❤😍🌷
thank you
Lots of great technic I have not ever seen a chain made up in such a way what was iit you boiled it in and would it work with copper wire. Useing your technique
Thank you for shareing
Thank you in advance
look simple but very beautiful
thank you
ЛЮБЛЮ ЯКОРНОЕ ПЛЕТЕНИЕ !!!! КЛАСС !!! СПАСИБО !!
большое спасибо! Добрый день
Potrei sapere se, in fase di montaggio, il diamante può essere rotto dall' orafo? In basso. Grazie.
Può succedere che in fase di montaggio il diamante si scheggi sulla cintura, è difficile ma possibile specialmente con pietre piccole. Normalmente in pietre grandi il danno è lieve e riparabile con il ritaglio della gemma.
Hey I find you vids very entertaining and wow man love your ring it is sick could you send me a pic
Good Morning
I noticed that your gold solder melts easy. Could you give me some solder formulas ?? Thank you so much
You can find a wide range of alloys ready for use on the LEGORGROUP website
I would pay you to let me work with you and learn this skill.
I'm dead serious about wanting to learn this. I need to start buying all the tools, but have no clue how to melt a whole ounce of gold though....
Your videos are inspirational.
I'm nothing in this world without any skill. :(
I'll do a little video for how the gold alloy is made in the traditional way with copper and silver.
@@scaffoal thank you!!!
We need more teachers like you in the world.
I really love that piece! I have something very similar to this, except it has a togle bar closure. How much for that piece?
for all information you can contact info@scaffoal.it
Wow como se llama ese tipo de pulsera
Very beautiful! It would be helpful to have commentary and a step-by-step-process
Che soluzione stai facendo bollire per pulire il braccialetto dopo la saldatura? Non l'ultrasonico ma nella padella.
Grazie
utilizzo un decapante in polvere da sciogliere in acqua, lo trovi in vendita dai grossisti di materiali per oreficeria, sostituisce l'acido solforico che è maggiormente aggressivo.
Un valor agregado por estar ella en forma artesanal . Saludos
gracias
Hola scaffoal!! excelente video te agradezco mucho, quiero preguntarte que calibre usaste en este brazalete ? 2mm? y que peso final obtuviste?
gracias, Utilicé un medio hilo de 1.2 mm de ancho. El peso final es g. 29
wow gracias por responder, me sorprende que sea de 1.2 mm se ve muy fuerte, pensaba que era de 2 mm de grosor esta preciosa!
Perfect
thank you!
i too wish to make my own jewelry. What is that machine called where you wind the metal into a tube?
it's an old hand drill
pretty good job i like that how much
thank you, for all information you can contact info@scaffoal.it
😉👍 nice work, what is it you put it into when you where boiling it after you finished the solder work to give it back the gold look ???
It's what jewelers call 'pickle', which is a mild acid solution used to clean up the jewelry after soldering. Heating up the pickle causes a faster reaction and reduced cleaning time.
the whole time you were making this i was thinking of the outside chain links of tire chains... ever seen a Tire Chain Bracelet
ok
Nice work
thank you
How much does the gold weigh before you melt it? Just curious.
for this work I don't use much more metal of the final object about ten percent more
Hi mate. What is the process called @10.44 and @12.14
Meisterwerk
Hello, very good work. What product do you use to boil the current in the pan?
it is a liquid to deoxidize gold
Excelente trabajo, me gustaría saber el largo y peso de esa obra de arte.!
gracias
superbe bracelet
thanks
What gauge was the wire, and what length was needed for the links?
I do not remember exactly I think about 2 millimeters. The thickness of the thread must be proportionate to the size of the rings, I rely on the experience, and normally I do a test with a few rings before starting work.
saludos bonitos trabajo
gracias
excelente.
gracias
How much does it cost to do it yourself?
What type of links are these, there really interesting.
nice work
thank you
G r t ... 👍....👏👏👏👏👏
thank you
as usual I was mesmerised , was that just normal pickle you cooked it in
thanks, no it is a liquid to deoxidize gold
More please!
thanks
잘한다 ㅎ
wow i see this show abuot one day his the best! frome bela ALADDIN jewelry israel.
thank you
I could watch chain making videos all day. Do you ever make your own clasps for this kind of small stuff?
In some cases yes, but only on very special requests from customers
Man if I ever make it rich I will be calling on you...gotta keep playin the lotto! Lol
thank you
I did that for 5 years
18k video my fav 😗
thank you
👍🏻👍🏻👍🏻👍🏻👍🏻
thank you
I love your sword ring!!!! Where can I get one???? Please let me know!
you can contact scaffoal@oro-diamanti.it , you can see the prices on www.scaffoal.it
Can someone tell me why the bracelet appear to have that white powder when it was burnt?
Is antioxidant and fluidifying liquid, it is used to improve the welding flow
Where do you purchase your precious metal and gemstones?
purchase on the Italian market
Amazing chain, Lovely work.
If you wouldn’t mind terribly to share your recipe for 18k rose gold?
Thank you by the way for the recipe for 18k yellow.
thanks, for the 18 kt title use on one thousand parts, 750 parts of pure gold, 30 parts of pure silver and 220 parts of pure copper
scaffoal thanks
Hello! For example, how much cost is that beautiful thing?
1750 euros (29g. gold 18kt)
Wow como se llama ese tipo de pulsera
Simple beautiful x
تو استاد منی 👑👑👑💎💎💎👌👌👌💝🙏🙏🙏
خیلی ممنون
🌹
thanks
Beautiful! How do you get your solder to flow so perfectly every time? @hat is the equipment you're using to pull the wire/chain through the holes?
To make the welding run, I use a liquid deoxidizer, which you can find from goldsmiths dealers.
the tool I use you can see in this site www.pelusi.com/1/banco_a_trafila_4089517.htm
이스라엘가서 할게많은데 시간이안나서 돌겟다 ㅎ
Bhai ye milegi kha pe kis shop pe