You can get a 0fuse Winchester. It uses DEVGL and can boot unsigned code. I know people who have 0 fuse Winchesters. But it's very hard to find a 0 fuse Oban CPU. I have DEVGL NANDs for every motherboard including Winchester. You need special files to create a DEVGL NAND.
Great video steve. I really enjoy the xbox stuff I shall have my damaged Xbox packaged and shipped to you on the 16th for its repair. keep up the good work really enjoying these videos fingers crossed that you can find a way to do these boards.
i think we have to look for different method from rgh for this board. there must be some way to hack this xbox model. like ps3 was not modded for some time , if the modders invest some time and effort into finding different method from rgh, its moddable.
Good attempt dude. And it’s horrible when pads lift especially when ya try record a video lol. I’m sure it is hackable in some way. Great video your my now go to guru on Xbox lol 😂
The only hack you can do on this model is profile usb hacks .... the dvd key is in the nand .the nand is locked with a cpu key .. the only way to get the dvd and cpu key is to RGH it .. RGH is not possible as the reset and post have been embedded into the cpu/gpu .. its the same on the xbox one .. hence why that's not been hack too 😉..
Odd. There were some late E's (all the way to the limited blue, Seafoam Green) consoles popping up with late Aug of 2014 manufacturing dates. I was under the assumption that those would surely have winchester's inside.
Estava pensando, o quão seria interessante se surgisse para essa placa winchester, o destravamento wasabi, ja que o mesmo não envolve solda, e sim apenas conexões na parte do drive de dvd. Isso sim seria bem incrível de ser feito.
Sí . Sería genial... No se puede acceder al firmware de la unidad de DVD para obtener la clave de la unidad de DVD... y no puede ser RGH en este momento... RGH es la única forma de obtener tanto la clave de la CPU como la de la unidad... Gracias
He can't. This guy isn't a professional. This guy doesn't even has a X-Clamp removal tool. The RST line is filtered. POST_OUT fuses are blown at factory. And PLL ...etc all are disabled. Microcode in the CPU checks the secure state before even the 1BL starts. If the secure fuses are blown, JTAG, Post, etc are disabled. Then the 1BL takes over POR/IPL.
Did realise you need a XClamp removal tool to be a professional. I'll put that in my CV now, lol . Maybe I should dug it out and use it. I've never claimed to be a professional, and I never said I could rgh it .. I was asking for new help .. as it's been years since repairing these ... Thank you for your comment, tho
@@8BitRetroReFix Sorry bro if you mind. I apologize. But you should get a X-Clamp removal tool. It's cheap. And I wanted to tell that there is no possiblity RGH will work on Winchester. The CPU is designed in a way that if reset pulse is too long, CPU properly resets instead of GLITCHING and if pulse is short, it doesn't have any effect. Also we can't get enough slowdown. We can use vCore to glitch instead of using POST_OUT but there i2c doesn't offer enough slowdown. So let's get straight to the point. Even if a exploit was released in future, it would not be RGH.
@@basimahmed-be6gj who is asking only rgh to work. there can be many other ways to exploit this versioin of xbox. PS3 slim and super slim were non exploitable (this was the thinking) until HEN came
Yeah, no worries, mate ... I'd never seen a winchester before and have been out of the loop for 10 years. I have TX XClamp tool it's just berried in box there it's been for 10 years, lol ... I'll dig it out, seeing I've started doing 360s again .. cheers for the info, tho
Hi hey friend, I have the diagrams of the controller cards for the Xbox360 consoles. Is there a possibility of getting the rgh3 method or earlier out of there?
I was reviewing and comparing between CORONA and Winchester consoles and there are debugging points that have been removed but I found these that may be another type of entry to modify the console
The problem with these points is that there are some that are only below the processor and that perhaps would be another method to modify the console. We have to investigate and try, I hope it can be hacked.
@arnavbhalla5 it could well be a winchester it's right on the time board Aug 2014 on ... if you look through the vent on the side under the dvd drive you'll see the heatsink. If there is a capasitor to the far right, then it's a winchester.. if you can see the heatsink to the right of the capasitor, then it's corona or trinity ..I hope that helps .. or you'll have to strip it and remove the heatsink to see ...
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
You can get a 0fuse Winchester. It uses DEVGL and can boot unsigned code. I know people who have 0 fuse Winchesters.
But it's very hard to find a 0 fuse Oban CPU. I have DEVGL NANDs for every motherboard including Winchester. You need special files to create a DEVGL NAND.
Great video steve.
I really enjoy the xbox stuff
I shall have my damaged Xbox packaged and shipped to you on the 16th for its repair.
keep up the good work really enjoying these videos fingers crossed that you can find a way to do these boards.
i think we have to look for different method from rgh for this board. there must be some way to hack this xbox model. like ps3 was not modded for some time , if the modders invest some time and effort into finding different method from rgh, its moddable.
Great video! Waitong for my to come in soon. Hope it is a Winchester
Have gotten further since the video released, i would love to mod my Winchester
Good info for someone looking to buy one to mod, get it before the date for good odds its not a winchester
Exactly, mate.... upto Aug 2014 are good to do .. after that, forget it 😉
Good attempt dude. And it’s horrible when pads lift especially when ya try record a video lol. I’m sure it is hackable in some way. Great video your my now go to guru on Xbox lol 😂
The only hack you can do on this model is profile usb hacks .... the dvd key is in the nand .the nand is locked with a cpu key .. the only way to get the dvd and cpu key is to RGH it .. RGH is not possible as the reset and post have been embedded into the cpu/gpu .. its the same on the xbox one .. hence why that's not been hack too 😉..
Odd. There were some late E's (all the way to the limited blue, Seafoam Green) consoles popping up with late Aug of 2014 manufacturing dates. I was under the assumption that those would surely have winchester's inside.
@sigmareviews They started putting the winchester board in them Aug 2014 onwards...
Estava pensando, o quão seria interessante se surgisse para essa placa winchester, o destravamento wasabi, ja que o mesmo não envolve solda, e sim apenas conexões na parte do drive de dvd. Isso sim seria bem incrível de ser feito.
Sí . Sería genial... No se puede acceder al firmware de la unidad de DVD para obtener la clave de la unidad de DVD... y no puede ser RGH en este momento... RGH es la única forma de obtener tanto la clave de la CPU como la de la unidad... Gracias
I want you to succeed in hacking this winchester. Why winchester - because it is most silent and stable motherboard iteration
He can't. This guy isn't a professional. This guy doesn't even has a X-Clamp removal tool. The RST line is filtered. POST_OUT fuses are blown at factory. And PLL ...etc all are disabled. Microcode in the CPU checks the secure state before even the 1BL starts. If the secure fuses are blown, JTAG, Post, etc are disabled. Then the 1BL takes over POR/IPL.
Did realise you need a XClamp removal tool to be a professional. I'll put that in my CV now, lol . Maybe I should dug it out and use it. I've never claimed to be a professional, and I never said I could rgh it .. I was asking for new help .. as it's been years since repairing these ... Thank you for your comment, tho
@@8BitRetroReFix Sorry bro if you mind. I apologize. But you should get a X-Clamp removal tool. It's cheap. And I wanted to tell that there is no possiblity RGH will work on Winchester. The CPU is designed in a way that if reset pulse is too long, CPU properly resets instead of GLITCHING and if pulse is short, it doesn't have any effect.
Also we can't get enough slowdown. We can use vCore to glitch instead of using POST_OUT but there i2c doesn't offer enough slowdown.
So let's get straight to the point.
Even if a exploit was released in future, it would not be RGH.
@@basimahmed-be6gj who is asking only rgh to work. there can be many other ways to exploit this versioin of xbox. PS3 slim and super slim were non exploitable (this was the thinking) until HEN came
Yeah, no worries, mate ... I'd never seen a winchester before and have been out of the loop for 10 years. I have TX XClamp tool it's just berried in box there it's been for 10 years, lol ... I'll dig it out, seeing I've started doing 360s again .. cheers for the info, tho
Gracias por intentarlo
Mine says it’s
Manufactured 2013-05-26
Is that modable
@TakeAFiscol yeah it should be 😀
Can i rgh my xbox 360 e with 2014-04-03
@@Bowandarriw yes 😉
Hi hey friend, I have the diagrams of the controller cards for the Xbox360 consoles. Is there a possibility of getting the rgh3 method or earlier out of there?
CPU_DBG
CPU_DBG_RST_EN R4R23 cpu pin 13abajo-4derecha
CPU_DBG8_RST0 cpu pin 7abajo-4derecha
CPU_DBG12_CPUCLK0 FT5R11
CPU_TINIT R4R21
I was reviewing and comparing between CORONA and Winchester consoles and there are debugging points that have been removed but I found these that may be another type of entry to modify the console
The problem with these points is that there are some that are only below the processor and that perhaps would be another method to modify the console. We have to investigate and try, I hope it can be hacked.
hopefully one day .Ive got every Schematic's for all of them except the winchaster.. Id love to get hold of that too ...
@@8BitRetroReFixI also have another possible method, tell me where we can contact each other to try and continue investigating.
you can do it
Mine says 2014:9:17
@arnavbhalla5 it could well be a winchester it's right on the time board Aug 2014 on ... if you look through the vent on the side under the dvd drive you'll see the heatsink. If there is a capasitor to the far right, then it's a winchester.. if you can see the heatsink to the right of the capasitor, then it's corona or trinity ..I hope that helps .. or you'll have to strip it and remove the heatsink to see ...