Ford Territory Fuel Filter Replacement (2.7Lt Diesel)
HTML-код
- Опубликовано: 19 окт 2024
- The powerplant used in this Ford Territory is a 2.7 Lt, turbocharged, direct injection diesel engine marketed as a ‘Duratorq’. The V6 is used across many vehicles, from the Citroen C5 and C6, to the Land Rover Discovery, Range Rover as well as multiple cars in the Jaguar range.
In this video, we replace the fuel filter - a simple job.
But be warned, there are several things you should be aware of, as well as testing you should do before you replace the filter, to ensure the engine starts easily after the filter replacement.
Disclaimer:
MiracleMAX wants you to be safe, however, no guarantee can be given against improper use or unauthorised modifications on the information provided. The repair shown in this video is carried out at your own risk and any property damage or injury is your own responsibility. Please ensure you carry out this repair safely using approved safe work practices, correct use of recommended tools and equipment. This video is educational only and is no guarantee of a result if done incorrectly. Any injury, damage or loss due to incorrect use of tools, information or equipment is the sole responsibility of the person carrying out the repair and not MiracleMAX.
Subscribe Button Credit
www.mediafire....
Soundtrack:
Sandviken Stradivarius by Wintergatan
This track can be downloaded for free at www.wintergatan.net
Free Licence to use this track in your video can be downloaded at www.wintergatan.net
30 Million Times (instrumental) by RYYZN
/ ryyzn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-30-mill...
Music promoted by Audio Library • 30 Million Times (inst...
#fuelfilters#dieselengines#fordterritory
Ford territory, ford territory fuel filter, how to replace a fuel filter on a ford territory, ford territory 2.7Lt diesel, how to replace a fuel filter on a diesel engine, how to replace a fuel filter on a common rail diesel, common rail diesel fuel filter, diy fuel filter, diy diesel fuel filter, fuel filter, territory, how to replace fuel filter ford territory v6, territory v6 2.7lt, 2013 territory, ford territory maintenance, how to prime fuel filter, how to prime fuel filter ford territory, how to install a fuel filter CRD, how to install a fuel filter on territory v6, how to change a fuel filter, territory fuel filter location, how to change a diesel fuel filter, DIY fuel filter replacement, 
Авто/Мото
Just replaced the injector / hp fuel pump on one of these now that's a full on job. Mirrors and a good light are the key 🤞 hope it works
BIG job.
Being a contortionist wouldn't hurt 🤕🤔
Excellent Thankyou. Heard too much about the Low pressure pump causing all sorts of problems.
Certainly something to keep an eye on.
Thanks heaps for the video!. I have replaced the low pressure pump about 6 months ago and it drove fine since , however yesterday I replaced the fuel filter and primed it and got it running. but ever since it now takes several attempts of cranking to start . sometimes once or twice and other times 4 or 5 times, even if I turn it off and then back on again! its doing my head in! would you have any suggestions pretty please?
Can you hear the low pressure fuel pump operating when you turn the key on? Have you carried out all the tests shown in the video?
Is there any air in the lines?
@@MiracleMAX yeah the low preassuure pump is working, ill investigate the air in the lines today and even try another new filter
Excellent advice -- thanks!
Glad it was helpful!
Hi MM, good info. More than just a filter change video.
Thanks Nigel. These do have problems with the low pressure pump, so I just wanted to include that in the filter change preparation.
Hi , did you have to take out the fuel filter pump fuse and depressurise the fuel line before removing the fuel connectors' on top ? Martin
Hey Martin, I didn't find it necessary
Brilliant mate well explained
Cheers Ian, glad it helped! 😉
About to do this job myself on my partners car. Going to check out for that low pressure pump now! Fingers crossed it all goes well after your super helpful video.
Hey BigDeezy,
I hope it goes well for you. Let us know how you go! 😁👍
@@MiracleMAX Thank you for this brilliant demonstration.
NOTE: after conducting all the precautionary tests, correctly fitting the new filter and priming the system. My Territory stalled after a few seconds, and failed to start after dozens of attempts. Adamant that I succumb to the fuel pump issue's mentioned, I decided to remove the hi-pressure fuel line (middle-green) and prime the system, purging diesel through the filter nipple. After refitting the fuel line, it managed to start on the very next attempt. THIS MAY SAVE $$$ REPLACING A FUEL PUMP
@@naz-uf8mt Well done Naz! I'm glad you were able to figure out the fault! 😉👍
Hi mate. I have a ford territory sz diesel and was wondering where the radiator filler is. I can't locate it. Only the resovoir.
This system uses an expansion tank and not an overflow bottle. There is no cap on the radiator.
Therefore the cap that you see on the expansion tank is how you fill the cooling system. If you look on the side of the expansion tank you should see a cold and hot level to fill to.
Hi, mate are you a mechanic or do you have work shop I need to do my territory services done with you and which city is you workshop located?
Thanks.
I am in NSW with my own workshop. You can contact me via email at miraclemax3@hotmail.com if you would like more details.
@@MiracleMAX thanks for your reply . I live in Melbourne.
@@ahmeduddinsyed4092 Sorry, I'm 2 hours from Sydney. Probably a bit far to drive for a service! 😉
Hi mate, after changing fuel filter… error coming when i start my ford territory….. “fuel system fault”. Please advice how to fix this issue. Thank you.
Hey Muhammad Saad ,
What is the fault code related to the description?
Did you test the fuel pump like shown in the video before the filter was replaced?
Is the engine starting & running OK?
Did you reconnect the water level sensor on the bottom of the filter?
MiracleMAX
@@MiracleMAX hi Mate, 1st really appreciate for your reply.
I don’t know the fault code number because i don’t have scanner. 2nd i also installed fuel pump also. Than change fuel filter.
Car start & runner perfectly but error coming on dash screen “fuel system fault”. How to remove this fault? Please advice
@@muhammadsaad6953 You will firstly need to figure out why the error has come up. As I said, did you reconnect the water level sensor? Have you rechecked all your connections on the fuel pump. Some vehicles need to clear a fault code before all systems start working again - for example the fuel gauge.
You may need a scan tool to see what the error is indicating.
ruclips.net/video/vrK2rruUknE/видео.html
@@MiracleMAX yes water level sensor attached. Tomorrow morning wil buy scanner. Kindly recommend good scanner which is easy to use for biggnera. Thanks
@@muhammadsaad6953 Difficult to say what scanner to buy. You could try something like a Launch Creader or something similar. It all depends on how much money you are willing to spend and what you want the scan tool to do.
There are a lot of reasonable scan tools out there that will do basic fault code readings, with capabilities to clear codes and supply live data as well. Perhaps go online and read some reviews. Try 'basic automotive scan tool australia' (if you are in Australia) in the search engine and then hit the 'shopping' tab. Make sure that the software is designed for your vehicle. They should provide a list of vehicles.
Let us know how you go! 😊
Mine is leaking up top what would that be .Havnt removed it yet
Could it be a damaged o-ring on one of the connectors or a damaged plastic pipe? Can you find exactly where it is leaking from? Can you wipe it clean & then get someone to turn on the ignition to prime the pump?
Is there a tool to remove a Ford Territory fuel line that connect to the fuel filter?
Hey Magyar Bluey,
There is no need for a special tool - you can just remove the lines as shown in the video. Simply press the coloured 'button' and the locking mechanism will release. Then just pull up on the line and it will disconnect from the filter.
@@MiracleMAX thanks the only problem is mine is a petrol Territory
From what I understand, the petrol version are just a flare nut that you undo with spanners. Most likely a Z373 in the Ryco brand. Make sure you check with the parts supplier for the correct application.
thanks ate very handy to know sub you mate
Thanks Mate, glad you got some benefit from the video! 😉
Weird, don’t think my Territory has glow plugs 🤷♂️ definitely don’t have a light and have never had trouble starting it
Hey Chris,
Is yours diesel?
@@MiracleMAX yes 2.7 V6 Diesel. Checked again this morning and definitely no light comes up
@@chrisriley4982 There definitely should be a glow plug light as shown in the video.
ruclips.net/video/pqUcqG6ZM4M/видео.html
Do you have an owners manual? Usually they will show you locations of the various lights on the dash.
Do you own a scan tool? Have you noted any fault codes?
I just went and had another look and there is a glow plug light. I’ve obviously just turned the key and cranked the engine too quick to notice. Luckily I live in a warm climate where I’ve not had to worry I guess coz yeah, never had dramas starting it
@@chrisriley4982 Great news. I'm glad that it is working correctly.
Thanks for sharing your comments
Where is the ASMR? 😌
Not quite sure???
Perhaps next video I'll make it a 'scratch & sniff' where you touch the screen & you smell petrol (disclaimer - DO NOT SNIFF PETROL) or maybe when you touch the screen you end up with greasy hands that smell like diesel! Perhaps I'll create an app! The sky is the limit......or perhaps I'm just getting carried away :)
I felt a little tingle
@@nigelwebber1472 Then my work is done! 😁
@@MiracleMAX promises promises 😂
Rc de
Sorry Colin, not sure what you mean.