At my first job my manager had me tint the windows on the building. Flat windows. I couldn't even do that, it looked like shit. She said it was fine luckily.
I am a Subscriber of yours for a while dude (keep up the good work) and now I saw the name and I was like “wait a minute...” didn’t knew that you have a brother. 🤟🏼
@@garajulfaragaraj i saw devins face and im like "this kinda looks like this other youtuber i know" then i saw camerons comment. had no idea, honestly a little mind blown. been watching cameron for a couple years and been following devin on insta for about a year
Bro I've been living under a rock and just learned about the clay mit on this vid! amazing tutorial man, seen some of your vinyl wrap vids and you make it all look so easy!
Well done Devin, love that you did it so quickly! Looking great! I won't lie, i was hoping for a more livelier colour but I trust your taste and know that the finished product will look amazing. Keep up the epic work man.
What the heat gun does to the front bumper is actually melt everything into a smooth surface that the vinyl adheres to, not opening up any "pores". After sanding, the surface is roughed up. A torch melts all the minute little high spots into a more gloss surface.
Looks great man. Would wrapping look okay over sun faded paint if I sanded it smooth with say 800 grit? Or 1000 grit? I have a black beetle that I’d like to look good again.
Great job! Can you connect two pieces without seams? I want to put this at the top of my class c RV and it's over 85 inches wide so I may need to connect it to another one?
Great video my friend! Question...What wrap vinyl company would you recommend to avoid paint being pulled later down the road. I am specifically looking at gloss black and doing just the roof on the VA subaru sti. Thank you in advance and have a blessed day!
man i am one of those with a cheap 4wd and the paint on the roof (some on the bonnet) is significantly faded back. how do you think a wrap would go on that and what kind of prep do you think would be appropriate? Cheers from shaun.
I got a question, I wanna wrap my car my self, I’ve got very minimal rust on my fenders and quarter panels. Would I need to treat that first or will I be okay? Again it’s not severe, just a couple small spots.
I have a school bus that needs to be painted but I would like to wrap it. The bus has ridges along the length in the middle. Is it possible to wrap it? It’s 30 feet long and is a dog nose front. Do you think we can diy it? Or will we waste a bunch of money on supplies and screw it up? We were thinking of just doing the hood and front fenders. Thanks
If you were to wrap your car a different color do you have to go to the DMV to change the color on your paperwork? Does anyone know any info about this? Thank you in advance!
He didn't do it in 10 min, my boy. He said the VIDEO is 10 mins. It actually took him hours, he was just editing out parts in the vid and sped the parts where he was doing it up.
Did you not watch the vid????? At the end of the video he says he left links to everywhere he bought everything, lol. You must have gotten bad grades in school cause you don't pay attention.
Bro you need those lil carts to put your car on that b is for build uses i think you would love them you can move you car all around the garage check em out
I searched it about Small size cars that can be fully wrapped with 50 to 55 feet / 15 to 16.8 meters of vinyl. Midsize cars can be fully wrapped with 60 to 65 feet / 18.3 to 19.8 meters of vinyl.
I can barely put tint on without getting pissed off. You’re a god for going through this.
Which country are you belong to.
At my first job my manager had me tint the windows on the building. Flat windows. I couldn't even do that, it looked like shit. She said it was fine luckily.
You know how to do everything. One of the most complete youtubers in the car community. 👏
wtf
This comment is 💯 facts. Dude is an underdog. Literally does it all!!!!
If you weren’t so likable I would despise you for making this look so easy.
You still hate him?
The man is a legend
I am a Subscriber of yours for a while dude (keep up the good work) and now I saw the name and I was like “wait a minute...” didn’t knew that you have a brother. 🤟🏼
@@garajulfaragaraj i saw devins face and im like "this kinda looks like this other youtuber i know" then i saw camerons comment. had no idea, honestly a little mind blown. been watching cameron for a couple years and been following devin on insta for about a year
Im a wrapper an this guy didnt do a good job at all
Just sayin
Bro I've been living under a rock and just learned about the clay mit on this vid! amazing tutorial man, seen some of your vinyl wrap vids and you make it all look so easy!
hahah same here I had no clue that it even exist!
I find using a wrap glove is easier on the vinyl and leaves less ‘scratches’ vs the wrap card
Good to know. Probably better control too.
Squeegee?
@@GunsNStuffthat's a weird name to call a tool. Sounds like something From SpongeBob
You are like a one man shop. You literally can do everything automotive related.
🙄 and Don’t forget us ladies. Nice work, you gave me the confidence to give it a shot💕
Lol I wanted to diy until I saw u have to take the car apart 😂😩
@@laughwithlatrice168 🤣🤣🤣yeah that part too.
@@Sum1sumwere30 lmbo 😂
Oh. I thought you were going to show me how to wrap a car in only 10 minutes.
Me too😭 I was like nah this some bullshit before I tapped in
😂
lol thank you for saving me 11 minutes -- I still had to watch though
Hahaha 🤣. For real.
Yes...hes getting a thumbs down ..thank you for saving me time
This is my favourite guide.
I've used it to put together a checklist and POA to follow when I do my car
Well done Devin, love that you did it so quickly! Looking great! I won't lie, i was hoping for a more livelier colour but I trust your taste and know that the finished product will look amazing. Keep up the epic work man.
SHOW THE COMPLETED CAR AT THE END! THATS WHAT WE ARE WAITING FOR MAN!
Lol, but what about the build up and anticipation! Isn't the process more exciting than the outcome?!?!😂😂😂
He did a great job u literally wrap it easy af your good
The NEW wrap on the FRS is LOOKING CLEAN/SICK AF MAN😎👌🏻👍🏻👍🏻.
I had no idea it was this easy, I totally have to wrap my Lincoln purple now
Great work, great help, great info. I think I may start with budget wrap and see how it goes.
What the heat gun does to the front bumper is actually melt everything into a smooth surface that the vinyl adheres to, not opening up any "pores". After sanding, the surface is roughed up. A torch melts all the minute little high spots into a more gloss surface.
This video is perfect because this is literally the exact car I plan to wrap lol!
Yesss back on the FRS !!!
Thanks for this [and other videos]. Keep up the excellent work and sharing with us--definitely appreciated!!!
Damn good job, I couldn’t even tint my rear window pre cut too 😂
Can't wait to the FRS in the new blacked out look soon!
One of my favorite RUclipsrs 👌
Hey just saw this awesome video. Can you do another one showing more how to prep the car before hand?
She looks good. Can't wait to see the widebody on it.
You're good at all things automotive
Looks great man. Would wrapping look okay over sun faded paint if I sanded it smooth with say 800 grit? Or 1000 grit? I have a black beetle that I’d like to look good again.
10:36 what’s that on thr trunk?
Great job! Can you connect two pieces without seams? I want to put this at the top of my class c RV and it's over 85 inches wide so I may need to connect it to another one?
Good job. Some bubbles appeared in a tight concave corner around the recess for the license plate. How would you go about fixing that?
Awesome I'm goin to save this for when I do mine here shortly a custom venom audi
OMG, what an amazing job!!! I really love it! Congrats!
Thanks a lot !!! I’m vinyl wrapping my mustang at home, I’m just unsure on how many feet of vynil I need for whole car😢
You make it look so easy damn bro
This is very impressive. Almost confident I can’t do this myself now lol. I’m wondering how the wrap held up on the heated front bumper
Was thinking about DIY my Lexus with Matte black wrap. Now I’m thinking I might loose my mind tryna do it
Super amazing..Good job guys..👍
What kind of vinyl? I like the look of it.
where did u get the big rolls of vinyl from ????? and do they do different colours?????
For anyone who’s successfully wrapped a car before; what are some mistakes that you made in the process, and how did you/ would you correct them?
dont rush it,
Great video my friend! Question...What wrap vinyl company would you recommend to avoid paint being pulled later down the road. I am specifically looking at gloss black and doing just the roof on the VA subaru sti. Thank you in advance and have a blessed day!
Devin Laying it down like a pro! Great wrap bro 🤙🔥
how do you wash the car if it gets dirty? Soap and water? Special car wash? Salt snow does it damage the wrap? Cold weather damages wrap?
I think you save material when doing rear panel and door together #thinking
man i am one of those with a cheap 4wd and the paint on the roof (some on the bonnet) is significantly faded back.
how do you think a wrap would go on that and what kind of prep do you think would be appropriate?
Cheers from shaun.
How long does the wrap last on this car?
Not long enough to do it
I got a question, I wanna wrap my car my self, I’ve got very minimal rust on my fenders and quarter panels. Would I need to treat that first or will I be okay? Again it’s not severe, just a couple small spots.
Tajinder Parmar fix it first
Always treat rust right away before it becomes worse
Damn that looks slick!
Brother! How much of the vinyl did you need for the full car?
^
Most likely be 15 mtrs for the whole car
Urb4n DrIft3r how many ft is that lol
@@Juniorgproductions 49ft
Most cars use less than 60 feet, 5x60 is more than enough
I have a school bus that needs to be painted but I would like to wrap it. The bus has ridges along the length in the middle. Is it possible to wrap it? It’s 30 feet long and is a dog nose front. Do you think we can diy it? Or will we waste a bunch of money on supplies and screw it up? We were thinking of just doing the hood and front fenders.
Thanks
Do you have to claybar ? All I have is a wash mitt and isopropyl alcohol will this work or do I need the claybar
Hey devin how much would you charge me to wrap my car? I live about a hour away?
How easy was it working with cheetah wrap? I am highly interested in giving them a try but have heard that the film can be difficult to install.
what wrap did you go with after all?
Nice job dude. If taken good car of how long does this last? & does a ceramic coating on top help?
Does it matter if you have prior wax or sealant on. Does the clay wipe that off for a paint only surface for better vinyl wrap adhering
Where do you get the wrap from? Im wanting to wrap my car in a matte black and not sure where to get the wrap from.
Thanks in advance 🤟🏼💕
Oh and another question , what measurements would you purchase the wraps in.
Anyone have these answer???
Ebay
@@sapphirekeyes2042Ebay has it all
@@babybatmouse4177they sell basic colors on Amazon even
Did a really good job.
What wrap do you use?
You gotta tell me how well it holds up
Very informational. Thx
Great video! Thanks
How you peeling the backing off and it not all going totally wrong? Using mounting liquid so its movable?
If you were to wrap your car a different color do you have to go to the DMV to change the color on your paperwork? Does anyone know any info about this? Thank you in advance!
I think it depends on the area but I’m pretty sure it can void your insurance in some areas. Although couldn’t you just peel it off?
How long was the wrap that you were using?
Literally wrapping my car now.
How much experience did you have with this before the video? Because I'm thinking about doing this to my car but I have zero experience wrapping.
For me it would be 10 minutes in dog minutes.
@@killerx9009 no it’d be slower i think
@@coolbmwdude It'll be just over an hour, which is still very fast is what low energy means
@@Sandmanspidy low energy things dog minutes is faster.
He didn't do it in 10 min, my boy. He said the VIDEO is 10 mins. It actually took him hours, he was just editing out parts in the vid and sped the parts where he was doing it up.
Hello amazing job thanks for sharing question you get the 240”x60” size or bigger sheets thanks
how would the vinyl wrap hold up in the sun for a long period of time?
Exactly! Im thinking it wont because heat makes plastic bubble up.
What’s the blue liquid you sprayed on the car before the clay bar
weird 10 minutes, I think it's sped up lol. cool video man. I like wrapping stuff as well, but at a much lower scale. great video!
This took him 3 days at the least. 3 different outfits. No way you can clean properly and wrap cut and post treat in 10 minutes haha. Click bait.
@@Eddie89 no its not lmao, if you think it's possible to do it in ten minutes ur dumb😂
How much vinyl is needed for the whole car? Planning to do my FRS too!!!
Anyone have recommendations for a vinyl wrap product that resembles the transmission blue paint color that is commonly used on the Hyundai Ioniq 6?
How big of a roll did you buy I am doing my whole car besides the hood because it is carbon fiber just dont know how much i should be buying
Nice work broham 👍🏻
Where did you order the vinyl wrap?
Did you not watch the vid????? At the end of the video he says he left links to everywhere he bought everything, lol. You must have gotten bad grades in school cause you don't pay attention.
Bro you need those lil carts to put your car on that b is for build uses i think you would love them you can move you car all around the garage check em out
Hey Devin, how many feet of vinyl wrap do you need to wrap a whole car?
I searched it about Small size cars that can be fully wrapped with 50 to 55 feet / 15 to 16.8 meters of vinyl. Midsize cars can be fully wrapped with 60 to 65 feet / 18.3 to 19.8 meters of vinyl.
@Dvniemela was this your first time doing this????
I just wanna make sure cuz I didn’t catch it but it’s the 60x75 roll right
Hai..How much did u use for a whole car?thx😁
Did you get a lot of sanding?
amazing, i love it
Can anyone recommend a good website to purchase the vinyl?
my cars got 380 thousand miles on it. I want to cover it for less than like 30 bucks of vinal? is this possable? Lexas ES
Im gona wrap that same car. Wish me luck!
Interesting that you wrap black color over black color and that is what I want to do too for my 4runner
the car is dark gray but might as well be black since you can only tell in sunlight
You're a beast bro!
Always putting in work!!
Hellon. At what temperature you use the heat gun
Thank you 😊❤
How much vinyl should I buy to full wrap a 350z
Do you have to take all the parts and lights off the car? Or could you do it with the car fully intact and just cut around those parts
You could but it wouldn’t look as clean. Thorough always looks much better and lasts much longer.
Love your content!
DAS SOME TALEN TED SHT devin love u bro
How much did the roll of vinlty cost you over all?
Can you vinyl wrap a car that has been spray painted with matte paint?
Damm wish you were local, shops in my area talking about 3-4k and 2 days to wrap my XKR. 😂
Might as we get a paint job
Where do you buy your vinyl ?
Gonna be SSIICCKK 💯🔥👍🏻👊🏻