How to Make an Irrigation Filter for Use in Canal, Lake or Pond

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024
  • I made this filter so I could use water from a canal to irrigate my lawn. The previous filter was constantly getting clogged with seaweed and algae. The idea was to enlarge the intake holes and cover them with multiple layers of materials I had lying around the house.
    Sure, I could have bought one, but ones that look like they work are in the $100+ range and I figured I could make something just as good for free with stuff I was going to throw away anyway.

Комментарии •

  • @trishbarras4131
    @trishbarras4131 2 года назад +1

    To prevent algae growing, put hay in plastic vegetable bags. The one with holes. Place one every 20 or 30 meters , on the edges. Replace the hay every six months, and you don't have an algae problem again

    • @jrm163
      @jrm163 Год назад

      How does the magic work please? Thanks!

  • @bethburger9889
    @bethburger9889 4 года назад +1

    Thank you! I've been wondering how to do that!

  • @spellboundpro
    @spellboundpro 7 лет назад +4

    i was wondering why the lathe was your inner layer. it would seem that you would want the finer filters directly covering the pipe (?)

    • @craigarious
      @craigarious  7 лет назад +2

      Great question....it was to support the outer layer and prevent it from clogging the inner pipe. That made sense to me at the time, and it's still working!!!

    • @derekhartzell3161
      @derekhartzell3161 4 года назад

      The finest screen is what clogs fastest. So you want to maximize the surface area, therefore putting it at the outside. The lower layers support that. The inner layers are not as important except to give sturdy support.

  • @datFUNKYb
    @datFUNKYb 3 месяца назад

    Gator Tuff Lakescreens FTW

    • @datFUNKYb
      @datFUNKYb 3 месяца назад

      My dad invented them.

  • @rf4215
    @rf4215 3 года назад +1

    Stills gets plugged up doesn't it?

  • @BruceDaniell2
    @BruceDaniell2 4 года назад +1

    How often have you inspected your creation?
    I’m in the process of getting my similar pvc based filter out of the water and usually I just replace the internal screens...but your idea sounds interesting and I have all the stuff you used!

    • @craigarious
      @craigarious  4 года назад +2

      Sorry I moved last year but there were no issues with it until I left. I would say it exceeded my expectations for lifespan.

    • @craigarious
      @craigarious  4 года назад +1

      @Evan Moyer Thanks for that. Great suggestion. I did not experience the disintegration of the green screen. Also, I found that as long as I ran it constantly (ie. 2x per week minimum) I didn't have any need to clean it out.

  • @AIRx77
    @AIRx77 6 лет назад +1

    Thank you!!!! Very cool, thank you for sharing this God bless you!

  • @UncommonShapes
    @UncommonShapes 8 лет назад

    How did this work for you after a summer of watering? We are installing our sprinkler system now and looking at different (inexpensive) ways to filter the canal water before it hits the pump. I'm curious how this lasted the year.

    • @craigarious
      @craigarious  8 лет назад

      Hey Jessica! Still works great. I still have to clean/change sprinkler heads periodically, but no more problems with the piece in the canal as of yet.

  • @rvasser68
    @rvasser68 6 лет назад +3

    How many HP is the pump?

    • @craigarious
      @craigarious  6 лет назад

      It's a Flotec 1.5 HP. You can see it here: amzn.to/2ByINIH

  • @richardcurtis8512
    @richardcurtis8512 5 лет назад

    2 quick questions:
    1) I live in SW Florida on a canal that appears to be just "brackish water"....I will use the canal water for outside watering....any problems with the Brackishness?
    2) what size of pump are you using? I need to draw the water up out of the canal nearly a 100ft before I can tap into it. Thank you for some great videos/richard in Port Charlotte

    • @craigarious
      @craigarious  5 лет назад

      Hey Richard. The brackishness should be fine for St. Augustine grass, but I would strongly recommend testing it by manually watering a patch with the brackish water before changing the system over. 2. I am using a sprinkler pump, sorry I don't have the specs, but when I bought it it was reeded to be able to pull water a certain distance. Really, once it's primed you'll be okay even if there is a slight elevation.

    • @richardcurtis8512
      @richardcurtis8512 5 лет назад

      @@craigarious thank you....I really have no grass....lotsa weeds....do have a great bunch of flowering plants....will ck with master Gardner buddy on how much they will take.....again thank you/richard

  • @wmw8453
    @wmw8453 7 лет назад

    Nicely done!

  • @landscapelighting
    @landscapelighting 6 лет назад

    it's 'leakproof'?? 'no leaks on the inside'?? Isn't water suppose to infiltrate it?

    • @craigarious1
      @craigarious1 6 лет назад

      Thanks for that. "Leakproof" meant that water can not enter the slits in the PVC without first passing through the screen/filter.

  • @randymiller8194
    @randymiller8194 2 года назад

    I don’t think fiberglass is good for the sprinkler pump

  • @superoldcorndogs2468
    @superoldcorndogs2468 6 лет назад

    There is not Sea weed growing on or in there. LOL.

    • @craigarious1
      @craigarious1 6 лет назад

      Hey Superoldcorndogs! In South Florida where I live, all the canals have lots of seaweed growing in them. Always a problem here!!

    • @superoldcorndogs2468
      @superoldcorndogs2468 6 лет назад

      I was under the impression that sea weed was kelp, and alge was not sea weed. Research tells me I was wrong.

  • @brianellison2580
    @brianellison2580 5 лет назад

    N