Thanks for watching! Click the description for products used in the video. Subscribe and click the bell to be notified of future videos. Be sure to follow us on social media for announcements, tips and more Facebook: facebook.com/WoodlandScenics Instagram: instagram.com/woodlandscenics Twitter: twitter.com/WoodlandScenics
Most track does not include attached roadbed when purchased. When it is included, it usually has a special name, such as Easy Track. The track in the video is a generic sectional track, I don't even remember which brand it is. Sectional track is manufactured by several companies, such as Atlas, Lionel, Bachmann, Life-Like etc. Check their individual websites for the sectional track they sell and you might also try a general 'google' search for model railroad track to get the best price.
Yes. Dried paint on railheads will inhibit conduction. We recommend removing dried paint with Tidy Track Maintenance Pads (TT4552), light gray side of the Rail Pal (TT4575), or an eraser-type rail cleaner.
They look like markers, but are actually paint pens called Track Painters...they come in three colors - Steel Rail, Rusty Rail and Weathered Tie. You can find them on our website along with other products from the Tidy Track Rail & Wheel Maintenance System product line. If you would like further information, you can search the following item numbers on our website: TT4580, TT4581 and TT4582. Thanks for your interest in our products! Happy Modeling.
Scenic Cement is a water-soluble spray adhesive. If you need to remove the track at some point after ballasting, soften the Scenic Cement™ with warm, soapy water. If the glue is hard to remove, use denatured alcohol.
Two things, whet can I find those little grass thing shown at 0:13? If you paint the top of the rails with the track painters will that mess up the electrical contact?
Hello! I believe that the grass that you are referring to is our Field Grass (FG171-174). We offer a variety of different color Field Grass, however, the Field Grass in this video is Field Grass Light Green (FG173). The Track Painters will interfere with any electrical conductivity. The paint will need to be cleaned off before operating your train. It is best to wipe the paint off as it is being applied, or it can also be cleaned off the rails with the Rail Tracker Cleaning Kit (TT4550) after the painting is complete. Hope this helps, and Happy Modeling!
I installed the WS roadbed and my track using WS foam tack. I applied foam tack to both surfaces, let it dry clear, then laminated the two surfaces. Let dry 24 hours. This worked great until I added ballast with the WS scenic cement. The foam tack is water soluble thus my track and roadbed delaminated. What a mess. Is there a better glue combination?
Scenic cement glue should dry within a few hours. You can use a fan to make it dry faster. We don't recommend using a paper towel because it wouldn't remove everything as easily, but you might be able too. Best of Luck!
@@ModelSceneryExpert thanks for the information! I just have two more questions. Is the Bright Boy Track cleaner by Walthers a good choice for cleaning tracks? And would the marker to paint the tracks effect the trains from running properly?
We're not sure how efficient that product would be, but Woodland Scenics does offer several products for track cleaning and maintenance. To answer your second question, the marker shouldn't harm the train's ability to run, especially if you've given it time to dry before running your train.
Thanks for watching our video. The black tool we used to clean the tracks is our Rail Tracker cleaning tool, which is part of our Rail Tracker Cleaning Kit. The Rail Tracker cleaning tool actually follows the track and hugs the rail while you clean. This tool makes it easy to clean hard-to-reach areas like inside tunnels, around structures and under power lines. Kit includes all you need to clean and maintain your track. Package doubles as a tray for storage. Replacement pads available. Designed to work on N, HO, HOn3 and three-rail O scale track. If you need more information about this tool, please visit our website: woodlandscenics.woodlandscenics.com/show/item/TT4550. Thanks for your interest in our products.
Ballast needs to be sized to the scale you are modeling. If it is not, it won’t look correct. On an actual railroad, if ballast is too large or too small, it will not work for its intended purpose so we would not recommend mixing grades. For example, depending on the scale you are modeling in, the Fine Grade may look like rock debris, not ballast. Hope this helps!
gary wise We recommend using Scenic Glue S190 to attach landscape materials (Underbrush, Bushes, Clump-Foliage, Lichen and Foliage Clusters and trees). Scenic Glue stays flexible, dries clear with a matte finish and is water soluble. Hope this is helpful to you!
Any product on the top of the rails can interfere with electrical conductivity and should be removed before operating you train. You can use our Tidy Track® System to help clean your tracks for good connectivity.woodlandscenics.woodlandscenics.com/show/category/TrackMaintenance
I need help, I am using the same products as Matt did in this video, and when ever I spray down the scenic cement it pushes the ballast around and forms clumps.
Hi...we are going to make an assumption that you may be spraying the Scenic Cement too closely and/or with too much force. To apply Scenic Cement, we suggest first misting the Ballast lightly with the Scenic Sprayer. Scenic Cement contains a wetting agent and misting on a light coat of the adhesive will help break the surface tension. Then, saturate the Ballast with Scenic Cement for a strong bond. You may apply it with an eye dropper or the Scenic Sprayer. When applying, keep the sprayer and/or dye dropper a couple of inches above the Ballast to help to keep it from being moved around. Hope this helps. If not, please drop us an email at sales@woodlandscenics and let them know you are the modeler from RUclips having trouble with his Ballast moving around and clumping. We'll help get this solved. Thanks!
I'm curious about the paint pens that you are showing on the tutorial. How many three foot lengths of track in HO scale will this pens cover. Just trying to get an idea of how many I will need for 185 feet of track
Hello, It's hard to tell how many feet out Track Painter pens can cover because the pens are used in a variety of ways and for different scales. But, in our testing, one pen covered 3500 linear feet (lines were lightly drawn and 1/16" thick). So it can cover up to 1,166 three foot lengths of track.
Track Painters are formulated to paint metal or plastic. They have been designed specifically for coloring railroad tracks and ties. Other materials, like markers, may or may not work on metal or plastic, can leave shiny residues or discolor over time.
Hello there! Tidy Track™ Cleaner Kit is our go-to! Find it at your local hobby store or on our website here: woodlandscenics.woodlandscenics.com/show/item/TT4550
salve ! pls tell me what material is best to use under the rail. in your video is something black and is allready have that shape on the extremities. Thank you !
+CEZAR ROBERT We laid our Track Bed underneath the track and attached it using Scenic Cement™. Track-Bed is sound-deadenin material that cushions vibrations for a smoother operation, is higher quality, and a low-cost alternative to other rail beds. It is compatible with cork, remains flexible, requires no pre-soaking and will not dry out or crumble. Good luck to you as you lay track!
as a dodgy modeler, I have struggled to create "ballasting" on old country branch lines. In Australia in the early years of expansion, many lines were run to extremely tight budgets and hence were laid essentially on the ground (no ballast as such and light rail ( usually around 45lb.). A "feature" of these lines also was no fencing - so livestock was a challenge. Vegetation ran up to the rails and often inside same. Any ideas would be helpful on how to re-create this type of line.
We have several products that may help re-create this look. You can see pictures of these products on our website that may help you determine which would fit your color palette the best. We suggest trying: Fine Talus in Gray (C1278), Buff (C1270), or Brown (C1274) | Gravel (C1286/C1287) | Static Grass -Burnt (FL633) | Field Grass (FG171-FG174) | Coarse Turf (T60-T65) | Fine Turf Earth Blend (T50/T1350)
ruclips.net/video/fxDNpUPZ-e8/видео.html Here is a link to our video about painting rails. Painting on top of rails inhibits conductivity, so you want to do the sides only. If you get some on the tops, we suggest using our Tidy Track Cleaning System to clean the track.
That is our Rail Tracker™ Cleaning Kit from our Tidy Track® System. You can find it and more videos on our website: woodlandscenics.woodlandscenics.com/show/Item/TT4550/page/1
Can I ask how long the scenics cement takes to fully harden? I’ve applied an entire bottle to a small area of ballast, and a day later it’s still crumbly to the touch? :(
When you touched the Ballast, did it feel like it was still wet or was it dry? If the Ballast still feels wet, you need to allow it to dry further. Place a fan on in the room to encourage air circulation. If the Ballast feels dry, you need to add more Scenic Cement. What happened is that you only saturated the top layer of the Ballast, creating a crust. Underneath the crust is loose Ballast that did not come in contact with Scenic Cement. So, when you press the top crust of the Ballast, the loose material beneath it will give and the glued Ballast (the crust) will crumble. The Ballast needs to be saturated for full adhesion. When you are applying the Scenic Cement, spray some over an area and watch it sink/absorb into the Ballast. Once it has sunk into the Ballast, mist it again. Repeat this until the Scenic Cement stops sinking into the Ballast and starts to pool.
Hey! I don't have a railroad yet but I was wondering, if electricity to run my HO trains goes to them through the rails, won't painting or coloring them like you did affect the performance? I'm hoping to build a small layout in the future.
The pen is one of our Track Painters. There are three colors available. Steel Rail - woodlandscenics.woodlandscenics.com/show/item/TT4580 Rusty Rail - woodlandscenics.woodlandscenics.com/show/item/TT4581 Weathered Tie - woodlandscenics.woodlandscenics.com/show/item/TT4582
Hello! Yes, dried paint or Scenic Cement on top of the rails will interfere with electrical conductivity and should be removed before operating your train. Happy modeling!
Hi, I am JUST getting back into model railroading for the first time as an adult. I had the same question, so basically you can paint the side of the rails but not the tops? Is this correct? Also as far as removing the cement, how fast does it usually dry, and worse case scenario, I think I have removed it, but a month or so later I test out the layout and find theres still cement or paint on the rail, at this point is it still removable? Thanks.
Is there a rule of thumb on the color of ballast in different types of tracks? For example, mainline versus yard versus industrial spur versus rural industrial siding, etc. In looking at Google Earth for trackage color on UP and BNSF yards and mainlines, the mainline seems to be light gray (almost a bluish tint to it), while the yards are darker, maybe dark gray or brown.
There is no rule of thumb about using a specific type of rock for different areas along the track. On a real railroad, Ballast is made out of whatever common rock is closest to the tracks. Any differences you see along the line are likely due to the proximity of quarries, and types of rock, in the area. Rail yards are where train maintenance occurs, where goods are moved to and from rail cars. Debris from maintenance and goods builds up around the rail yard, accumulating on the Ballast and making it look darker. Railroads are less likely to replace the Ballast in rail yards. These are all reasons why the rail yard ballast looks darker than other areas along the track.
Those are our Track Painters, one of the products in our Tidy Track Rail and Wheel Maintenance System. They are available in three colors - Rusty Rail, Steel Rail and Weathered Tie. They work for all scales to paint metal and plastic and modelers can use them before or after installing their track. Each Track Painter includes a replacement tip. Check your local hobby shop where other Woodland Scenics products are sold. Here is the link to the Tidy Track system of products for more information. woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
What branded track is this and where can I buy HO sets that have track without roadbed? (I want to use Woodland Scenics roadbed so I can cut it for crossings)
+Scott Nelson Hello Scott! My guess is that they probably are available in your country. Our products can be found in many countries across six continents. If you would tell me which country you live in, I can put you in touch with the distributor who can steer you toward the hobby shop nearest you. Thanks for your interest!
You can always order from us online, woodlandscenics.com. If you have a local hobby shop they can also order from any of our international distributors such as Walthers or Stevens International.
Rohan Halle They are called Track Painters, and are part of the Tidy Track Rail and Wheel Maintenance System. Here are the links, so you can find out more information about them. Thanks for your interest! Weathered Tie woodlandscenics.woodlandscenics.com/show/Item/TT4582/page/1 Steel Rail woodlandscenics.woodlandscenics.com/show/Item/TT4580/page/1 Rusty Rail woodlandscenics.woodlandscenics.com/show/Item/TT4581/page/1
+Darren Best We would recommend letting the glue dry before applying the soil. If you use the wet Ballast glue to adhere the soil it will not look realistic because the wet glue will be on all sides of the Ballast pieces and the soil will cover the Ballast rather than falling realistically into the cracks and crevices of the particles. Hopefully this helps! Good luck!
The size of the layout depends on what the modeler is looking for, as well as the skill level. I would recommend our Woodland Scenics Layout kits for experienced modelers: woodlandscenics.woodlandscenics.com/show/category/LAKits. For someone with less experience or just starting to learn, I would recommend starting out with our Scene-A-Rama basic kits. These kits will help teach you the skills needed to advance to a larger layout. A lot of the Scene-A-Rama kits are used in class settings or projects for younger modelers.scenearama.woodlandscenics.com/show/category/BasicKits.
The Scenic Cement applied onto Ballast should dry completely within a few hours. Environmental conditions will affect dry time. To speed up dry time, place a fan in the room to increase air circulation.
Hi, I recently ballasted some rail with 00/H0 gauge ballast, but I recently orderd some n gauge ballast. Would I work ok If I used the n gauge stuff too?
Matthew Fletcher Hello Matthew. That is the Rail Tracker, which is part of our Tidy Track Rail and Wheel Maintenance System. Here is the link. woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900 Hope this helps!
We do not offer any track and cannot say if it is possible to build your own. We only sell the scenery and landscape that goes around a model railroad.
Scenic Cement™ does not need to be diluted. You can find instructions and additional videos about Scenic Cement on our website: woodlandscenics.woodlandscenics.com/show/Item/S191/page/1
I have a question for anyone who may be able to help. When ballasting my (N gauge Kato) track, what should I do when I come to the remote turn outs? Won't the ballast get in the mechanism and stop them from switching properly? Do I just skip over those sections of track and leave them bare? Any thoughts would be much appreciated.
We are experts at modeling scenery and we can advise how to ballast track; however, when it comes to switches, we prefer to defer to model railroad experts. Because of their moving parts, ballasting around switches can be very tricky and we recommend you seek the advice of a model railroader at your local hobby (train) shop. You could also contact a model railroad club in your area, or research RUclips videos that demonstrate how to ballast a switch.
We do not have a tool specifically for that. Our entire Tidy Track System works to keep track clean from dirt and grime. What kind of glue are you wanting to remove from the track? We may be able to offer a recommendation if it's one of our glues.
I am using @@ModelSceneryExpert ballast cement with an eye dropper that isn't working very well. I just purchased woodland scenics spray bottle , but not sure what to use to clean the glue off the track after spraying
If the Scenic Cement is wet, you can simply wipe it off. If it has dried, you can use rubbing alcohol on cotton swabs to wipe it away. Tidy Track should clean it off okay as well. Also, sometimes you can just take a craft stick and scrape it away.
Ianjanes03 We do not recommend using Scenic Glue to adhere Ballast. We recommend using Scenic Cement (S191). Scenic Cement contains a wetting agent to prevent clumping when adhering the Ballast. Hope this helps!
That is our Rail Tracker™ Cleaning Kit from our Tidy Track® System. You can find it and more videos on our website: woodlandscenics.woodlandscenics.com/show/Item/TT4550
We are experts at modeling scenery and we certainly can advise modelers how to ballast track, however, when it comes to switches, we prefer to defer to model railroader experts. Because of their moving parts, ballasting around switches can be very tricky and we recommend you seek the advice of a model railroader at your local hobby (train) shop. You could also contact a model railroad club in your area, or research RUclips videos that demonstrate how to ballast a switch. Hope this helps, good luck and Happy Modeling!
It's a woodland scenics product and I highly recommend it. It comes in several colors. And if you cant find it there is also a set of paint pens by Testors. One set has three volors for rails and ties.
We used our Track Paint Pen. There are three different pens (TT4580-TT4582) you can use. Check them out on our website for more information: woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
+Trainz Express Hello! They are called Track Painters and they come in three colors, Weathered Tie, Rusty Rail and Steel Rail. They are products included in our Tidy Track Rail and Wheel Cleaning System. woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
Hello! Matt used the Rusty Rail Track Painter (TT4581, woodlandscenics.woodlandscenics.com/show/item/TT4581) to paint the track rails. He then used the Weathered Tie Track Painter (TT4582, woodlandscenics.woodlandscenics.com/show/item/TT4582) to paint the ties of the track.
That's our Rail Tracker™ Cleaning Kit. You can find it at your local hobby shop or on our website: woodlandscenics.woodlandscenics.com/show/category/TrackMaintenance
+adamjames710 I apologize for the delay in responding to your comment. We do our best to respond to comments within the first 24 hours. However we are not on site during weekend hours and so it may take a little longer. Here is the answer to your question... Scenic Cement is a ready-to-use spray or brush-on adhesive specially formulated to glue Ballast, Turf and other landscape materials to a layout. This multi-use product is non-toxic, water-based and dries to a matte finish. Scenic Cement contains a wetting agent that breaks surface tension, allowing easier and faster penetration of scenery materials for a strong bond and permeates instantly for maximum coverage. PVA glue does not dry with a matte finish so when being used in landscaping it will result in unrealistic shiny areas in the model. Also, the bond is not as strong because it does not penetrate the scenery materials well and can be peeled off most surfaces after it has dried.
There are not any hobby shops currently located in India, but you can always order product from our website or check out our Store Locator to find a hobby shop is closer: woodlandscenics.woodlandscenics.com/show/information/DealerSearch?ws
I'm not sure which product you're referring to, but you can find our products on our website or at your local hobby shop. Here's a link to our store locator: woodlandscenics.woodlandscenics.com/show/information/dealersearch
Yes, you can us Bachmann E-Z track. Ballasting E-Z Track will be a two-step process. Begin by using Foam Tack Glue (ST1444) along the beveled edges of the track. Brush on thinned Foam Tack Glue (thinned with approximately 20% water), then press the Ballast onto the glue. Work in small manageable sections, so the glue does not dry before the Ballast can be applied. To ballast the top of the track, use Scenic Cement (S191). Cover the top of the track with desired amount of Ballast. Brush Ballast from rails and top of ties. Mist Scenic Cement onto Ballast to break surface tension, and then saturate the Ballast using an eyedropper or the Scenic Sprayer (S192).
Bachmann EZ-track is not meant to be ballasted, however it can be done. You will need to use Foam Tack Glue (ST1444) along the slanted edges and Scenic Cement (S191) on the top of the track. Along the slanted edges of the track, brush on thinned Foam Tack Glue (thinned with approximately 20%water to make it easier to brush), then press the Ballast into the glue. Work in small manageable sections so the glue does not dry out. On the top of the track follow our normal ballasting instructions using Scenic Cement. Hope this helps!
I was wondering what you used to make weeds in between the tracks? also can a ho scale train still go over the weeds without messing it up? or is it just for show? thanks again!
+Jesse Shird The material used to model the weeds between the tracks is Light Green Field Grass (FG173). When used in this way, it is intended to model unused or abandoned tracks. An active track should never be obstructed. Happy Modeling!
You can ballast Bachmann EZ Track. Ballasting E-Z Track will be a two-step process. Begin by using Foam Tack Glue along the beveled edges of the track. Brush on thinned Foam Tack Glue (thinned with approximately 20% water), then press the Ballast onto the glue. Work in small manageable sections, so the glue does not dry before the Ballast can be applied. To ballast the top of the track, use Scenic Cement. Cover the top of the track with desired amount of Ballast. Brush Ballast from rails and top of ties. Mist Scenic Cement onto Ballast to break surface tension, and then saturate the Ballast using an eyedropper or the Scenic Sprayer.
Eric Buddha How much ballast you need for 65 feet of track will depend on the scale you are modeling in and width of the road bed you wish to cover. Here is the coverage for the different grades of Woodland Scenics Ballast, so you can determine the amount of ballast you will need. Hope this is helpful! Ballast - Fine Grade 1 Bag - Fine 6.8 sq ft 1 Shaker - Fine 16.7 sq ft Ballast - Medium Grade 1 Bag - Medium 4.7 sq ft1 Shaker - Medium 11.5 sq ft Ballast - Coarse Grade 1 Bag - Coarse 3.25 sq ft1 Shaker - Coarse 8 sq ft
+john knopfle this is something that would be better handled by the Customer Service Department. Feel free to contact them at 573-346-5555. After it answers press 1 for a representative. Thank you.
Sounds like he got glue in his Turnout points and they are now stuck. Turnouts need to be done carefully and making sure they continue to switch properly.
Hello. I do wanna ask you what markers did you used to make the track old? I did try alot of them but i cannot find the ones you use! Can you help me please?? Thanks! Regards Alex
Alex Dumitras They look like markers, but are actually paint pens called Track Painters...they come in three colors - Steel Rail, Rusty Rail and Weathered Tie. You can find them at your local hobby shop or on our website along with other products from the Tidy Track Rail & Wheel Maintenance System product line. If you would like further information, you can search the following item numbers on our website: TT4580, TT4581 and TT4582. Thanks for your interest in our products! Happy Modeling.
***** Many thanks! I will search them! I don't know if the hobby shop near me has it as i live in UK but i will serch it or buy it online. I did watch you're tutorials and built my own model using you're products!
Alex Dumitras You can contact our UK distributor through their website: www.bachmann.co.uk. They will be able to tell you who sells the Tidy Track System retail in the UK. Thanks for your interest!
You can add a thin layer of Ballast to this kind of track. Scenic Cement will work to attach the Ballast on the flat area between the rails and ties. However, the Ballast will not stick very easily on the slanted sides using Scenic Cement. For the sides, use a dilution of approximately 75% Foam Tack Glue to 25% water and brush it on.
+Zachtrains Gaming The track used in this video is Atlas Code 83. As demonstrated in the video, the track has also been weathered using Tidy Track® Track Painters. Rusty Rail (TT4581) was used to paint the rails and Weathered Tie (TT4582) was used to paint the ties. When all painting was completed, the Rail Tracker tool was used to clean the tops of the rails. Atlas Model Railroading company is available online at this website: www.atlasrr.com/ Thanks for your questions! Hope you find what you need!
This is awesome! If I'm doing HO and want to simulate as realistic as possible which ones should I use? And what does he use to clean the track at the end? Thanx, Matt
railroadpics _ Hello! Ballast is offered in three different sizes, Fine, Medium and Coarse. Any of the 3 sizes will work with your HO Layout depending upon your personal preference as to which one you chose. In this video we have usedthe Gray Medium (B1382) mixed with a little of the Gray Fine (B1375). When you pull up the product page you will see coverage and scale charts. At the end of the video we are using our Rail Tracker Cleaning Kit TT4550. Quick links for your convenience: Gray Ballast: @1 Rail Tracker Cleaning Kit: @1 Hope this helps!
When using Scenic Cement with a very fine "natural rock" type ballast, would you still avoid using wet water or alcohol before applying Scenic Cement? thanks, td
Todd Davidson Yes! Scenic Cement has a flow agent built into the product, so there is no need to add wet water or alcohol. After applying your ballast, mist Scenic Cement lightly onto the ballast to help break surface tension, then saturate for a strong bond. Hope this helps, and Happy Modeling!
***** yes this helps greatly, thank you! Also, for N scale, would you recommend the sprayer or an eye dropper for the pre-wetting and saturating etc..? thanks again, td
Todd Davidson We suggest misting for the pre-wetting step. If you use an eyedropper, the Scenic Cement will most likely just roll off the top of the Ballast. As for saturating, either technique will work. It depends on which one you feel more comfortable working with. Hope this helps.
Wow! Thank you for the video. You make ballasting and landscaping look so easy! I like the how you used paint markers to weather the track. Are the paint markers Woodland Scenics? Also, do they work on Kato Unitrack? (specifically N scale) Thanks again! :-)
That was one of our Track Painter pens! The link below will take you to a place on our website where you can find them in three colors. woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
Hello! We have a couple of lights that are in OO/HO scale (JP5675, JP5676, JP5677). Other than that, we only model in N, HO, O and G scale. Happy modeling!
Hey, I just came across this channel whilst looking for tips on how to lay ballast with a realistic look to it. I have a couple of questions which I would be very grateful if you could help me with. Firstly, would the tracks not be damaged due to the glue/ballast being put down onto it. And secondly, these products are exactly what I’ve been looking for. Are they available in the UK?
You will want to make sure that the Ballast will not interfere with the connection of your locomotive to your tracks: ballast being in direct contact with the track or ballast is to thick and your locomotive hits it when running Make sure to protect your track by covering it so when the Scenic Cement is sprayed it does not come in contact with your track. You could also apply Scenic Cement with an eyedropper if that is your preferred method. To find a hobby store near you that sells our products, use the Store Locator on our website. woodlandscenics.woodlandscenics.com/show/information/dealersearch
Woodland Scenics thank you for your response. This has really helped me out. Just one more question, what is then pen you use to make the tracks looks rusted and where can I get it?
That is our Track Painter Pen in the color Rusty Rail. You can find them on our website or you can contact your local hobby shop. woodlandscenics.woodlandscenics.com/show/category/TrackPainters
Thanks for watching! Click the description for products used in the video. Subscribe and click the bell to be notified of future videos.
Be sure to follow us on social media for announcements, tips and more
Facebook: facebook.com/WoodlandScenics
Instagram: instagram.com/woodlandscenics
Twitter: twitter.com/WoodlandScenics
you have the most awesome job in the universe
We absolutely agree! Happy modeling!
thanks guys
These guys are just straight vibing 👌
Woodland Scenics is amazing
i never realized how easy it is to make a highly detaild model railroad
lol, easy is a relative term, it can get very complicated
Most track does not include attached roadbed when purchased. When it is included, it usually has a special name, such as Easy Track. The track in the video is a generic sectional track, I don't even remember which brand it is. Sectional track is manufactured by several companies, such as Atlas, Lionel, Bachmann, Life-Like etc. Check their individual websites for the sectional track they sell and you might also try a general 'google' search for model railroad track to get the best price.
Sparse dirt flock on the ballast is a nice touch. I'll have to try that.
Yes. Dried paint on railheads will inhibit conduction. We recommend removing dried paint with Tidy Track Maintenance Pads (TT4552), light gray side of the Rail Pal (TT4575), or an eraser-type rail cleaner.
Thanks for uploading this video. I'm about to start my first model railroad and I wasn't too sure on how to do the track ballast. Thanks again.
how'd it go?
They look like markers, but are actually paint pens called Track Painters...they come in three colors - Steel Rail, Rusty Rail and Weathered Tie. You can find them on our website along with other products from the Tidy Track Rail & Wheel Maintenance System product line. If you would like further information, you can search the following item numbers on our website: TT4580, TT4581 and TT4582. Thanks for your interest in our products! Happy Modeling.
Great short video. Also the music/background music is great, too!
What were those pens that you used on the rails and sleepers?
Scenic Cement is a water-soluble spray adhesive. If you need to remove the track at some point after ballasting, soften the Scenic Cement™ with warm, soapy water. If the glue is hard to remove, use denatured alcohol.
awesome video on applying woodland Scenics products
He really made that look so easy
Now how do you do the wild grass between the ties of the tracks?
Thank you, i had figured out my problem. I had the scenic sprayer on the "stream" setting instead of the mist setting.
Great! Glad you are back modeling happily! :-)
Two things, whet can I find those little grass thing shown at 0:13? If you paint the top of the rails with the track painters will that mess up the electrical contact?
Hello! I believe that the grass that you are referring to is our Field Grass (FG171-174). We offer a variety of different color Field Grass, however, the Field Grass in this video is Field Grass Light Green (FG173). The Track Painters will interfere with any electrical conductivity. The paint will need to be cleaned off before operating your train. It is best to wipe the paint off as it is being applied, or it can also be cleaned off the rails with the Rail Tracker Cleaning Kit (TT4550) after the painting is complete. Hope this helps, and Happy Modeling!
Thanks
If you paint the top with the track painters does it create a problem with the locomotives connection?
[thank, you for sharing you're helpful video.] 🙏
Glad it was helpful!
I installed the WS roadbed and my track using WS foam tack. I applied foam tack to both surfaces, let it dry clear, then laminated the two surfaces. Let dry 24 hours. This worked great until I added ballast with the WS scenic cement. The foam tack is water soluble thus my track and roadbed delaminated. What a mess. Is there a better glue combination?
Great video. Easy to understand and execute.
After using the scenic cement glue, how long so i have to wait for it to dry? Can also clean the tracks with just a paper towel?
Scenic cement glue should dry within a few hours. You can use a fan to make it dry faster. We don't recommend using a paper towel because it wouldn't remove everything as easily, but you might be able too. Best of Luck!
@@ModelSceneryExpert thanks for the information! I just have two more questions. Is the Bright Boy Track cleaner by Walthers a good choice for cleaning tracks? And would the marker to paint the tracks effect the trains from running properly?
We're not sure how efficient that product would be, but Woodland Scenics does offer several products for track cleaning and maintenance. To answer your second question, the marker shouldn't harm the train's ability to run, especially if you've given it time to dry before running your train.
@@ModelSceneryExpert ok thanks for the help! Have a great evening!
What was that black track tool he used to clean the tracks after he brushed off the excess ballast?
Thanks for watching our video. The black tool we used to clean the tracks is our Rail Tracker cleaning tool, which is part of our Rail Tracker Cleaning Kit. The Rail Tracker cleaning tool actually follows the track and hugs the rail while you clean. This tool makes it easy to clean hard-to-reach areas like inside tunnels, around structures and under power lines. Kit includes all you need to clean and maintain your track. Package doubles as a tray for storage. Replacement pads available. Designed to work on N, HO, HOn3 and three-rail O scale track. If you need more information about this tool, please visit our website: woodlandscenics.woodlandscenics.com/show/item/TT4550. Thanks for your interest in our products.
@@ModelSceneryExpert thank you will purchase it
Must you put the ballast first before the scenic cement? Any reason why not do the other way around?
You can spray before applying ballast also, but you always need to spray after ballast is applied to properly seal and lock the ballast in place.
Ballast needs to be sized to the scale you are modeling. If it is not, it won’t look correct. On an actual railroad, if ballast is too large or too small, it will not work for its intended purpose so we would not recommend mixing grades. For example, depending on the scale you are modeling in, the Fine Grade may look like rock debris, not ballast. Hope this helps!
exactly always go by scale for your ballast. Z and N use Fine Grade, HO use Medium, and O, S, G, and TT use Coarse
Subscribed as I'm a massive fan thankyou 😊
how did you glue down the rest of the scenery? i used scenics cement alone before and it never holds it down good enough??????
gary wise We recommend using Scenic Glue S190 to attach landscape materials (Underbrush, Bushes, Clump-Foliage, Lichen and Foliage Clusters and trees). Scenic Glue stays flexible, dries clear with a matte finish and is water soluble. Hope this is helpful to you!
***** The weeds inside the track would go perfect for my lionel fastrack.
Does the glue you put on the ballast if you get it on the rails does it hurt the rails
Any product on the top of the rails can interfere with electrical conductivity and should be removed before operating you train. You can use our Tidy Track® System to help clean your tracks for good connectivity.woodlandscenics.woodlandscenics.com/show/category/TrackMaintenance
I need help, I am using the same products as Matt did in this video, and when ever I spray down the scenic cement it pushes the ballast around and forms clumps.
Hi...we are going to make an assumption that you may be spraying the Scenic Cement too closely and/or with too much force. To apply Scenic Cement, we suggest first misting the Ballast lightly with the Scenic Sprayer. Scenic Cement contains a wetting agent and misting on a light coat of the adhesive will help break the surface tension. Then, saturate the Ballast with Scenic Cement for a strong bond. You may apply it with an eye dropper or the Scenic Sprayer. When applying, keep the sprayer and/or dye dropper a couple of inches above the Ballast to help to keep it from being moved around. Hope this helps. If not, please drop us an email at sales@woodlandscenics and let them know you are the modeler from RUclips having trouble with his Ballast moving around and clumping. We'll help get this solved. Thanks!
I'm curious about the paint pens that you are showing on the tutorial. How many three foot lengths of track in HO scale will this pens cover. Just trying to get an idea of how many I will need for 185 feet of track
Hello,
It's hard to tell how many feet out Track Painter pens can cover because the pens are used in a variety of ways and for different scales. But, in our testing, one pen covered 3500 linear feet (lines were lightly drawn and 1/16" thick). So it can cover up to 1,166 three foot lengths of track.
@@ModelSceneryExpert thanks for the reply and info.
Can you just use a regular marker?
Track Painters are formulated to paint metal or plastic. They have been designed specifically for coloring railroad tracks and ties. Other materials, like markers, may or may not work on metal or plastic, can leave shiny residues or discolor over time.
@@ModelSceneryExpert Ok! Thanks for the info!
What track cleaner are you using
Hello there! Tidy Track™ Cleaner Kit is our go-to! Find it at your local hobby store or on our website here: woodlandscenics.woodlandscenics.com/show/item/TT4550
salve ! pls tell me what material is best to use under the rail. in your video is something black and is allready have that shape on the extremities. Thank you !
+CEZAR ROBERT We laid our Track Bed underneath the track and attached it using Scenic Cement™. Track-Bed is sound-deadenin material that cushions vibrations for a smoother operation, is higher quality, and a low-cost alternative to other rail beds. It is compatible with cork, remains flexible, requires no pre-soaking and will not dry out or crumble. Good luck to you as you lay track!
Hello what type of paint or markers do you use to color ties and rails? TY
He uses our Rusty Rail Track Painter (TT4581) on the track rails and our Steel Rail Track Painter (TT4580) on the ties.
Very good video.Enjoy it thanks
as a dodgy modeler, I have struggled to create "ballasting" on old country branch lines. In Australia in the early years of expansion, many lines were run to extremely tight budgets and hence were laid essentially on the ground (no ballast as such and light rail ( usually around 45lb.). A "feature" of these lines also was no fencing - so livestock was a challenge. Vegetation ran up to the rails and often inside same. Any ideas would be helpful on how to re-create this type of line.
We have several products that may help re-create this look. You can see pictures of these products on our website that may help you determine which would fit your color palette the best. We suggest trying:
Fine Talus in Gray (C1278), Buff (C1270), or Brown (C1274) | Gravel (C1286/C1287) | Static Grass -Burnt (FL633) | Field Grass (FG171-FG174) | Coarse Turf (T60-T65) | Fine Turf Earth Blend
(T50/T1350)
Hi....did he use the scenic rust colour pen on the top of the rails also? ( Conductivity? ) Or just on the sides?
ruclips.net/video/fxDNpUPZ-e8/видео.html Here is a link to our video about painting rails. Painting on top of rails inhibits conductivity, so you want to do the sides only. If you get some on the tops, we suggest using our Tidy Track Cleaning System to clean the track.
What was the tool used afterwards to clean the track and get the glue off the track
That is our Rail Tracker™ Cleaning Kit from our Tidy Track® System. You can find it and more videos on our website: woodlandscenics.woodlandscenics.com/show/Item/TT4550/page/1
Can you take the track apart in pieces after you ballast it?
It is possible to separate the track pieces after they’ve been ballasted. However, the ballast will not remain intact.
would i find the track cleaner at a hobby shop?
Every hobby shop has different stock, so you can always call to be sure they have it in store. It is highly likely your local hobby shop will have it.
Thanks
Can I ask how long the scenics cement takes to fully harden? I’ve applied an entire bottle to a small area of ballast, and a day later it’s still crumbly to the touch? :(
When you touched the Ballast, did it feel like it was still wet or was it dry?
If the Ballast still feels wet, you need to allow it to dry further. Place a fan on in the room to encourage air circulation.
If the Ballast feels dry, you need to add more Scenic Cement. What happened is that you only saturated the top layer of the Ballast, creating a crust. Underneath the crust is loose Ballast that did not come in contact with Scenic Cement. So, when you press the top crust of the Ballast, the loose material beneath it will give and the glued Ballast (the crust) will crumble.
The Ballast needs to be saturated for full adhesion. When you are applying the Scenic Cement, spray some over an area and watch it sink/absorb into the Ballast. Once it has sunk into the Ballast, mist it again. Repeat this until the Scenic Cement stops sinking into the Ballast and starts to pool.
Hey! I don't have a railroad yet but I was wondering, if electricity to run my HO trains goes to them through the rails, won't painting or coloring them like you did affect the performance? I'm hoping to build a small layout in the future.
Greetings! Dried paint on top of the rails will interfere with electrical conductivity and should be removed before operating your train.
What is that pen that you use to paint the rails?
The pen is one of our Track Painters. There are three colors available.
Steel Rail - woodlandscenics.woodlandscenics.com/show/item/TT4580
Rusty Rail - woodlandscenics.woodlandscenics.com/show/item/TT4581
Weathered Tie - woodlandscenics.woodlandscenics.com/show/item/TT4582
At 1:43, what pen do you use to color the rail?
Good afternoon, Here is your answer!
Track Painter - Rusty Rail
If u paint and scenic cement the rails will it effect the electricity for the trains?
Hello! Yes, dried paint or Scenic Cement on top of the rails will interfere with electrical conductivity and should be removed before operating your train. Happy modeling!
Woodland Scenics k thanks
Hi, I am JUST getting back into model railroading for the first time as an adult. I had the same question, so basically you can paint the side of the rails but not the tops? Is this correct? Also as far as removing the cement, how fast does it usually dry, and worse case scenario, I think I have removed it, but a month or so later I test out the layout and find theres still cement or paint on the rail, at this point is it still removable? Thanks.
Is there a rule of thumb on the color of ballast in different types of tracks? For example, mainline versus yard versus industrial spur versus rural industrial siding, etc. In looking at Google Earth for trackage color on UP and BNSF yards and mainlines, the mainline seems to be light gray (almost a bluish tint to it), while the yards are darker, maybe dark gray or brown.
There is no rule of thumb about using a specific type of rock for different areas along the track. On a real railroad, Ballast is made out of whatever common rock is closest to the tracks. Any differences you see along the line are likely due to the proximity of quarries, and types of rock, in the area.
Rail yards are where train maintenance occurs, where goods are moved to and from rail cars. Debris from maintenance and goods builds up around the rail yard, accumulating on the Ballast and making it look darker. Railroads are less likely to replace the Ballast in rail yards. These are all reasons why the rail yard ballast looks darker than other areas along the track.
What type of markers did you use on the rails and ties?
Those are our Track Painters, one of the products in our Tidy Track Rail and Wheel Maintenance System. They are available in three colors - Rusty Rail,
Steel Rail and Weathered Tie. They work for all scales to paint metal and plastic and modelers can use them before or after installing their track. Each Track Painter includes a replacement tip. Check your local hobby shop where other Woodland Scenics products are sold. Here is the link to the Tidy Track system of products for more information.
woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
Great stuff, well explained.
What branded track is this and where can I buy HO sets that have track without roadbed? (I want to use Woodland Scenics roadbed so I can cut it for crossings)
P.S. was wondering what kind of ballast spreader did you use? it looks very effective.
We used a dry brush to help spread the ballast. We recommending cleaning the tracks and ties of excess glue with our Tidy Track Rail Tracker.
Wish your products were available in my country, would help a lot.
+Scott Nelson Hello Scott! My guess is that they probably are available in your country. Our products can be found in many countries across six continents. If you would tell me which country you live in, I can put you in touch with the distributor who can steer you toward the hobby shop nearest you. Thanks for your interest!
You can always order from us online, woodlandscenics.com. If you have a local hobby shop they can also order from any of our international distributors such as Walthers or Stevens International.
U can also hit up Amazon as well .
Hay, I am intending on painting my track but I don't know what to use, I saw you used those pens, what are they called??
Rohan Halle They are called Track Painters, and are part of the Tidy Track Rail and Wheel Maintenance System. Here are the links, so you can find out more information about them. Thanks for your interest!
Weathered Tie
woodlandscenics.woodlandscenics.com/show/Item/TT4582/page/1
Steel Rail
woodlandscenics.woodlandscenics.com/show/Item/TT4580/page/1
Rusty Rail
woodlandscenics.woodlandscenics.com/show/Item/TT4581/page/1
Easy and smart. It's a pity your products are so hard to find and expensive to buy in Brazil.
How do you remove the track after you ballast it if the scenic cement is like glue?
Use warm water to break up the glue
wet water with soap added or use alcohol
U did this amazingly
Did you add the fine soil the freshly glued ballast, or did you wait for the ballast to dry, then add the soil?
+Darren Best We would recommend letting the glue dry before applying the soil. If you use the wet Ballast glue to adhere the soil it will not look realistic because the wet glue will be on all sides of the Ballast pieces and the soil will cover the Ballast rather than falling realistically into the cracks and crevices of the particles. Hopefully this helps! Good luck!
what brush did you use in the video to clean the track
Hi, Andrew! We used a dry paintbrush.
what is a good size layout for a 12 year old boy dcc
The size of the layout depends on what the modeler is looking for, as well as the skill level. I would recommend our Woodland Scenics Layout kits for experienced modelers: woodlandscenics.woodlandscenics.com/show/category/LAKits. For someone with less experience or just starting to learn, I would recommend starting out with our Scene-A-Rama basic kits. These kits will help teach you the skills needed to advance to a larger layout. A lot of the Scene-A-Rama kits are used in class settings or projects for younger modelers.scenearama.woodlandscenics.com/show/category/BasicKits.
Does the woodland scenics cement normally take hours to dry ?
The Scenic Cement applied onto Ballast should dry completely within a few hours. Environmental conditions will affect dry time. To speed up dry time, place a fan in the room to increase air circulation.
Hi, I recently ballasted some rail with 00/H0 gauge ballast, but I recently orderd some n gauge ballast. Would I work ok If I used the n gauge stuff too?
Jarratt N scale would work fine with H.O. scale also
What's the track cleaner he uses at the end of the video?
Matthew Fletcher Hello Matthew. That is the Rail Tracker, which is part of our Tidy Track Rail and Wheel Maintenance System. Here is the link.
woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
Hope this helps!
i want to make the train track but cant find any video regarding track is that available readymade or i could make it
We do not offer any track and cannot say if it is possible to build your own. We only sell the scenery and landscape that goes around a model railroad.
I'd recommend EZ Track with all scenery from woodland scenics.
Do you have to dilute the glue with water?
Scenic Cement™ does not need to be diluted. You can find instructions and additional videos about Scenic Cement on our website: woodlandscenics.woodlandscenics.com/show/Item/S191/page/1
I have a question for anyone who may be able to help.
When ballasting my (N gauge Kato) track, what should I do when I come to the remote turn outs? Won't the ballast get in the mechanism and stop them from switching properly? Do I just skip over those sections of track and leave them bare? Any thoughts would be much appreciated.
We are experts at modeling scenery and we can advise how to ballast track; however, when it comes to switches, we prefer to defer to model railroad experts. Because of their moving parts, ballasting around switches can be very tricky and we recommend you seek the advice of a model railroader at your local hobby (train) shop. You could also contact a model railroad club in your area, or research RUclips videos that demonstrate how to ballast a switch.
does woodland scenic sell the tool that you used to clean up the glue from the track?
We do not have a tool specifically for that. Our entire Tidy Track System works to keep track clean from dirt and grime. What kind of glue are you wanting to remove from the track? We may be able to offer a recommendation if it's one of our glues.
I am using @@ModelSceneryExpert ballast cement with an eye dropper that isn't working very well. I just purchased woodland scenics spray bottle , but not sure what to use to clean the glue off the track after spraying
If the Scenic Cement is wet, you can simply wipe it off. If it has dried, you can use rubbing alcohol on cotton swabs to wipe it away. Tidy Track should clean it off okay as well. Also, sometimes you can just take a craft stick and scrape it away.
I make my own ballast when i can but not always especially when building a layout for some one else because peopl get excited and cant wait
i tryied it and it work untill i got to a point and stoped had to install a new point to get it to work why?
+john knopfle we are not exactly sure what you mean, could you please give us a little more information?
Is it possible to use scenic glue on this?
Ianjanes03 We do not recommend using Scenic Glue to adhere Ballast. We recommend using Scenic Cement (S191). Scenic Cement contains a wetting agent to prevent clumping when adhering the Ballast. Hope this helps!
What do you use to clean the track, I would like to get one
That is our Rail Tracker™ Cleaning Kit from our Tidy Track® System. You can find it and more videos on our website: woodlandscenics.woodlandscenics.com/show/Item/TT4550
how do you ballest switch points without the point jamming
We are experts at modeling scenery and we certainly can advise modelers how to ballast track, however, when it comes to switches, we prefer to defer to model railroader experts. Because of their moving parts, ballasting around switches can be very tricky and we recommend you seek the advice of a model railroader at your local hobby (train) shop. You could also contact a model railroad club in your area, or research RUclips videos that demonstrate how to ballast a switch. Hope this helps, good luck and Happy Modeling!
thank you, so much that did help a lot
can you put down the ballast before you put down the track
?
You can but its more realistic when the rail are covered, not just laying on top.
Hi woodlands scenics what kind diorama base are you using in this video ?
Hello! The base was a foam sheet covered with Plaster Cloth. Then, the Plaster Cloth was colored with Earth Undercoat Liquid Pigment.
What product was used to paint the rails and sleepers?
It's a woodland scenics product and I highly recommend it. It comes in several colors. And if you cant find it there is also a set of paint pens by Testors. One set has three volors for rails and ties.
We used our Track Paint Pen. There are three different pens (TT4580-TT4582) you can use. Check them out on our website for more information: woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
What kind of marker is used at 1:50?
+Trainz Express Hello! They are called Track Painters and they come in three colors, Weathered Tie, Rusty Rail and Steel Rail. They are products included in our Tidy Track Rail and Wheel Cleaning System. woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
What was the exact pen you used please?
Hello! Matt used the Rusty Rail Track Painter (TT4581, woodlandscenics.woodlandscenics.com/show/item/TT4581) to paint the track rails. He then used the Weathered Tie Track Painter (TT4582, woodlandscenics.woodlandscenics.com/show/item/TT4582) to paint the ties of the track.
@@ModelSceneryExpert lovely Thankyou
Were did you get your track clean from
That's our Rail Tracker™ Cleaning Kit. You can find it at your local hobby shop or on our website: woodlandscenics.woodlandscenics.com/show/category/TrackMaintenance
Do ou use the same glue for the ground cover?
+Jim Peacock
Yes, Scenic Cement
(S191) is used to secure ground cover as well.
What's the difference between scenics cement and diluted PVA glue?
+adamjames710 I apologize for the delay in responding to your comment. We do our best to respond to comments within the first 24 hours. However we are not on site during weekend hours and so it may take a little longer. Here is the answer to your question...
Scenic Cement is a ready-to-use spray or brush-on adhesive specially formulated to glue Ballast, Turf and other landscape materials to a layout. This multi-use product is non-toxic, water-based and dries to a matte finish. Scenic Cement contains a wetting agent that breaks surface tension, allowing easier and faster penetration of scenery materials for a strong bond and permeates instantly for maximum coverage.
PVA glue does not dry with a matte finish so when being used in landscaping it will result in unrealistic shiny areas in the model. Also, the bond is not as strong because it does not penetrate the scenery materials well and can be peeled off most surfaces after it has dried.
How long does it take to dry ?
railguy82 around 1 to 2 days
do ur products available in india too
There are not any hobby shops currently located in India, but you can always order product from our website or check out our Store Locator to find a hobby shop is closer: woodlandscenics.woodlandscenics.com/show/information/DealerSearch?ws
Will the train still run if you weathered the track?
Where do u get the stough
I'm not sure which product you're referring to, but you can find our products on our website or at your local hobby shop. Here's a link to our store locator: woodlandscenics.woodlandscenics.com/show/information/dealersearch
could this method work with Bachmann ez track?
Yes, you can us Bachmann E-Z track. Ballasting E-Z Track
will be a two-step process. Begin by using Foam Tack Glue (ST1444) along the beveled edges of the track. Brush on thinned Foam Tack Glue (thinned with approximately 20% water), then press the Ballast onto the glue. Work in small
manageable sections, so the glue does not dry before the Ballast can be applied. To ballast the top of the track, use Scenic Cement (S191). Cover the top of the track with desired amount of Ballast. Brush Ballast from rails and top of ties. Mist Scenic Cement onto Ballast to break surface tension, and then
saturate the Ballast using an eyedropper or the Scenic Sprayer (S192).
Great. Thanks for the reply :)
Will this method work with Bachmann EZ track?
Bachmann EZ-track is not meant to be ballasted, however it can be done. You will need to use Foam Tack Glue (ST1444) along the slanted edges and Scenic Cement (S191) on the top of the track. Along the slanted edges of the track, brush on thinned Foam Tack Glue (thinned with approximately 20%water to make it easier to brush), then press the Ballast into the glue. Work in small manageable sections so the glue does not dry out. On the top of the track follow our normal ballasting instructions using Scenic Cement. Hope this helps!
I was wondering what you used to make weeds in between the tracks? also can a ho scale train still go over the weeds without messing it up? or is it just for show? thanks again!
+Jesse Shird The material used to model the weeds between the tracks is Light Green Field Grass (FG173). When used in this way, it is intended to model unused or abandoned tracks. An active track should never be obstructed.
Happy Modeling!
Thank you very much.
Great video looked so easy will this work on bachmann ez track ?
You can ballast Bachmann EZ Track. Ballasting E-Z Track will be a two-step process. Begin by using Foam Tack Glue along the beveled edges of the track. Brush on thinned Foam Tack Glue (thinned with approximately 20% water), then press the Ballast onto the glue. Work in small manageable sections, so the glue does not dry before the Ballast can be applied. To ballast the top of the track, use Scenic Cement. Cover the top of the track with desired amount of Ballast. Brush Ballast from rails and top of ties. Mist Scenic Cement onto Ballast to break surface tension, and then saturate the Ballast using an eyedropper or the Scenic Sprayer.
@@ModelSceneryExpert thank you !! Gonna try it
How much ballast would I need for 65ft of track?
Eric Buddha How much ballast you need for 65 feet of track will depend on the scale you are modeling in and width of the road bed you wish to cover. Here is the coverage for the different grades of Woodland Scenics Ballast, so you can determine the amount of ballast you will need. Hope this is helpful!
Ballast - Fine Grade 1 Bag - Fine 6.8 sq ft 1 Shaker - Fine 16.7 sq ft
Ballast - Medium Grade 1 Bag - Medium 4.7 sq ft1 Shaker - Medium 11.5 sq ft
Ballast - Coarse Grade 1 Bag - Coarse 3.25 sq ft1 Shaker - Coarse 8 sq ft
***** Thank you
i tryed to do like what u show in viedos but than whenit got to switch it stoped
+john knopfle this is something that would be better handled by the Customer Service Department. Feel free to contact them at 573-346-5555. After it answers press 1 for a representative. Thank you.
Sounds like he got glue in his Turnout points and they are now stuck. Turnouts need to be done carefully and making sure they continue to switch properly.
Hello. I do wanna ask you what markers did you used to make the track old? I did try alot of them but i cannot find the ones you use! Can you help me please?? Thanks!
Regards Alex
Alex Dumitras They look like markers, but are actually paint pens called Track Painters...they come in three colors - Steel Rail, Rusty Rail and Weathered Tie. You can find them at your local hobby shop or on our website along with other products from the Tidy Track Rail & Wheel Maintenance System product line. If you would like further information, you can search the following item numbers on our website: TT4580, TT4581 and TT4582. Thanks for your interest in our products! Happy Modeling.
***** Many thanks! I will search them! I don't know if the hobby shop near me has it as i live in UK but i will serch it or buy it online. I did watch you're tutorials and built my own model using you're products!
Alex Dumitras You can contact our UK distributor through their website: www.bachmann.co.uk. They will be able to tell you who sells the Tidy Track System retail in the UK. Thanks for your interest!
Great video! My track is actually a power lock track for Life Like similar to EZ-Track. Can I still ballast this type of track?
You can add a thin layer of Ballast to this kind of track. Scenic Cement will work to attach the Ballast on the flat area between the rails and ties. However, the Ballast will not stick very easily on the slanted sides using Scenic Cement. For the sides, use a dilution of approximately 75% Foam Tack Glue to 25% water and brush it on.
What type of Track is used in this video? Im wanting it badly... Could you also leave a link to a website that carries it?
+Zachtrains Gaming The track used in this video is Atlas Code 83.
As demonstrated in the video, the track has also been weathered using Tidy Track® Track Painters. Rusty Rail (TT4581) was used to paint the rails and Weathered Tie (TT4582) was used to paint the ties. When all painting was completed, the Rail Tracker tool was used to clean the tops of the rails.
Atlas Model Railroading company is available online at this website: www.atlasrr.com/
Thanks for your questions! Hope you find what you need!
awesome
This is awesome! If I'm doing HO and want to simulate as realistic as possible which ones should I use? And what does he use to clean the track at the end? Thanx, Matt
railroadpics _ Hello! Ballast is offered in three different sizes, Fine, Medium and Coarse. Any of the 3 sizes will work with your HO Layout depending upon your personal preference as to which one you chose. In this video we have usedthe Gray Medium (B1382) mixed with a little of the Gray Fine (B1375). When you pull up the product page you will see coverage and scale charts. At the end of the video we are using our Rail Tracker Cleaning Kit TT4550. Quick links for
your convenience:
Gray Ballast: @1
Rail Tracker Cleaning Kit: @1
Hope this helps!
Thanx so much!
When using Scenic Cement with a very fine "natural rock" type ballast, would you still avoid using wet water or alcohol before applying Scenic Cement? thanks, td
Todd Davidson Yes! Scenic Cement has a flow agent built into the product, so there is no need to add wet water or alcohol. After applying your ballast, mist Scenic Cement lightly onto the ballast to help break surface tension, then saturate for a strong bond. Hope this helps, and Happy Modeling!
*****
yes this helps greatly, thank you! Also, for N scale, would you recommend the sprayer or an eye dropper for the pre-wetting and saturating etc..? thanks again, td
Todd Davidson We
suggest misting for the pre-wetting step. If you use an eyedropper, the Scenic
Cement will most likely just roll off the top of the Ballast. As for saturating, either technique will work. It depends on which one you feel more comfortable working with. Hope this helps.
***** you guys are a cool company, I have a track painting marker. and I love it a lot. I will buy a lot more of your products.
Wow! Thank you for the video. You make ballasting and landscaping look so easy! I like the how you used paint markers to weather the track. Are the paint markers Woodland Scenics? Also, do they work on Kato Unitrack? (specifically N scale) Thanks again! :-)
Those are our Track Painter Pens. They can work on any scale of track, plastic and metal.
What kind of marker did you use to paint the ties? Is that aWoodland scenic brand as well?
That was one of our Track Painter pens! The link below will take you to a place on our website where you can find them in three colors. woodlandscenics.woodlandscenics.com/show/category/TTTWMS?perPage=1900
Do woodland scenically do anything in 00 scale (1:76)
Hello! We have a couple of lights that are in OO/HO scale (JP5675, JP5676, JP5677). Other than that, we only model in N, HO, O and G scale. Happy modeling!
Hey, I just came across this channel whilst looking for tips on how to lay ballast with a realistic look to it. I have a couple of questions which I would be very grateful if you could help me with. Firstly, would the tracks not be damaged due to the glue/ballast being put down onto it. And secondly, these products are exactly what I’ve been looking for. Are they available in the UK?
You will want to make sure that the Ballast will not interfere with the connection of your locomotive to your tracks: ballast being in direct
contact with the track or ballast is to thick and your locomotive hits it when running Make sure to protect your track by covering it so when the Scenic Cement is sprayed it does not come in contact with your track. You could also apply Scenic Cement with an eyedropper if that is your preferred method.
To find a hobby store near you that sells our products, use the Store Locator on our website. woodlandscenics.woodlandscenics.com/show/information/dealersearch
Woodland Scenics thank you for your response. This has really helped me out. Just one more question, what is then pen you use to make the tracks looks rusted and where can I get it?
That is our Track Painter Pen in the color Rusty Rail. You can find them on our website or you can contact your local hobby shop. woodlandscenics.woodlandscenics.com/show/category/TrackPainters
+Woodland Scenics thanks this helped a lot
very nice
Can you do more of this