Install A Vinyl Hood Decal (Sticker) Like A Pro

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024

Комментарии • 45

  • @NadaApasao
    @NadaApasao 2 месяца назад +1

    Beast mode. Good job

  • @clivewinters7479
    @clivewinters7479 2 года назад +2

    Really excellent demonstration. All the best from the UK 🇬🇧

  • @kevinmedere4441
    @kevinmedere4441 Год назад

    Great video, I hade a vinyl Pegasus for my Fiero that was probably ten years old or more. Your video allowed me to put it on successfully. Like you said, you have to be patient. Had a bump on my paint that shows, but outside of that, it looks good. Thanks again

  • @TexasLady220
    @TexasLady220 5 лет назад +2

    Got mine today. Going to try doing this tomorrow! Great video. Thanks!

  • @joeski1859
    @joeski1859 7 месяцев назад

    I have watched all the videos on line .... This is the best detailed oriented one ... Only thing I would add is use 4drops of baby shampoo in water to keep vinyl a little more mobile....

  • @Delmarksman
    @Delmarksman 5 лет назад +4

    Very helpful video, thank you.

  • @jasonpidduck8225
    @jasonpidduck8225 5 лет назад +1

    Thanks for the video mate, super helpful. Looks pretty hard so I think I might get the local vehicle wrapping place to do it : ).

  • @lalamorena22
    @lalamorena22 4 года назад

    WoW! Great quality finish🔥🔥🔥🔥!!

  • @gray_wolverine63
    @gray_wolverine63 Год назад

    Great video. I have a decal on my Ram1500 Rebel. How do I maintain it to keep it looking new after two it looks dull. Thanks

  • @danbailey96
    @danbailey96 2 года назад +1

    A spraying of the paper with water application fluid or rapid tac greatly loosens the transfer tape making it easier to remove.

  • @Higher_Powered_Soldier
    @Higher_Powered_Soldier 3 месяца назад

    thanks a bunch guy

  • @mattg9543
    @mattg9543 6 лет назад

    Great video ! Thank you very much !!

  • @colors4u682
    @colors4u682 2 года назад

    How about applying a decal to a slanted front van? How to approach it? Thank you.

  • @susanreilly5015
    @susanreilly5015 2 года назад

    What do you use for a Squeegee

  • @victoriawoosley9065
    @victoriawoosley9065 3 года назад

    Where can I get that transfer paper from? I have the tape but it's not that wide

  • @susanreilly5015
    @susanreilly5015 2 года назад

    And also. Can I use soapy water ?

  • @jasperbenjaminjr2207
    @jasperbenjaminjr2207 2 года назад

    Thank you really through

  • @johnschialdone3388
    @johnschialdone3388 4 года назад +2

    If you hang the decal it will unroll itself. Much cleaner. Also squeegee the decal before you start. This will prevent loose pieces. I also like to add a couple drops of dish soap to the water.

  • @davidwagner7159
    @davidwagner7159 10 месяцев назад

    How do you fix bubbles

  • @susanreilly5015
    @susanreilly5015 2 года назад

    How does the cut edge not peel up?

  • @jonathanmason4896
    @jonathanmason4896 3 года назад

    Do yo install decals live in Chicago

  • @richardgomez2731
    @richardgomez2731 4 года назад

    can you clear coat over it

  • @redwingdetroit9671
    @redwingdetroit9671 3 года назад +1

    Nice job. Are decals wet or dry install specific? I thought i saw somewhere where the wet ones have a blue backing paper? Thank you

    • @tree356
      @tree356 3 года назад

      The “blue backing” is because it’s a matte black decal.

  • @demariolofton
    @demariolofton 3 года назад +2

    You sure have to have patients with decals my guy. Unless you want a lil ass sticker, then yeah 1 can put it on fast for ya.

  • @jimraimondi410
    @jimraimondi410 4 года назад

    Great Video :)

  • @richardgomez2731
    @richardgomez2731 4 года назад

    are there decals or stincels that can be painted over base then removed and clear coat to eliminate edges ??

    • @littlecncshop
      @littlecncshop 3 года назад

      A stencil will create a hard edge, that you'll still see and feel when its cleared.

  • @susanreilly5015
    @susanreilly5015 2 года назад

    What do you use for a squeegee??

  • @BenjaminKeith
    @BenjaminKeith 5 лет назад

    GREAT install video! At 24:57, is that a bubble on the lower right corner about 8 inches from the bottom? :-)

    • @sell2golf
      @sell2golf 5 лет назад +1

      Hi Benjamin, no that is the hole from the windshield sprayer nozzle under the vinyl. You will poke a hole through the vinyl there and re-install the sprayer on top after the installation. Hope that helps.

    • @littlecncshop
      @littlecncshop 3 года назад +1

      Considering its the front of the hood, on the opposite side of where you cut the holes for the squirters, yes its a bubble lol.

    • @starkness7030
      @starkness7030 Год назад

      Totally a bubble lmfao

  • @steviecarbone4052
    @steviecarbone4052 6 лет назад +1

    Great video!! I see you were using plain water to wet everything down. Is that all you need? You don’t need soapy water or product called rapid tack?

    • @danbondurant178
      @danbondurant178  6 лет назад +4

      We have never used rapid tack, but we have heard it is a good product. You can use soapy water, but if you don't get the ratio right it can make it difficult for the decal to stick. If you decide to use soap, just do a tiny drop in a full sized bottle. In other words, its better to use less than more. We want to keep things as simple as possible for our customers so we just use water and have always had good results. Hope this helps. Thanks for your business!

    • @steviecarbone4052
      @steviecarbone4052 6 лет назад +2

      Dan Bondurant Thank you for getting back to me!!👍

  • @michaelquarantello5851
    @michaelquarantello5851 6 месяцев назад

    Thanks for the video. Only suggestion I would make is never use paper towels on a vehicle. Paper towels are abrasive and will leave scratches.

  • @littlecncshop
    @littlecncshop 3 года назад +1

    That's not really how professionals install decals.....close though. You should have ran a piece of tape all the way across the middle to make a hinge, instead of just taping the edges. Also, you should burnish the entire decal prior to installing it. That will prevent you from having pieces not stick to the transfer tape. Id also recommend using cast vinyl on a hood. Its much more resistant to the heat of the hood, and the sun. Overall though, minus that one bubble, nice install

  • @duwaine96
    @duwaine96 5 лет назад +1

    Why the hell is Eminem showing people higher vinyl wrap

    • @jimmybiz6076
      @jimmybiz6076 5 лет назад +1

      Because he's a "wrap god" 😂💥

    • @adamduke6836
      @adamduke6836 2 года назад

      His real name is even Marshall

  • @alex298dos
    @alex298dos 3 года назад +1

    Hablas mucho, te torna aburrido el tutorial,,, tuve que adelantar el video para llegar al punto

    • @tecunumantonatiu4484
      @tecunumantonatiu4484 2 года назад +1

      Heey. Take it easy. Si no te gusta. Busca otro. Haste uno vos,, a ver si la puedes !! Respeto!!