@@belugajr3906 you need hcu axis x and y, half and hull action as a minimum, in controls there is a menu called hcu that has all the controls on the real hcu
I've been flying the Cat since it's release but have always wanted to at least have an Idea of what goes on in the RIO's office and therefore jump in the back and have a go, very helpful and well explained, thanks to you both.
- RWS and TWS have the same detection range - recommend you revisit the aspect switch, I'm not sure where you got the numbers of each switch. They're by 600 knots - target size switch does commands the missile according to the slant range of the missile to the target, not by time to impact - main lobe clutter switch is not for a 0 closure target; thats zero Doppler filter. Mlc is for contacts that have the same vc to you as the ground is
LT/RT shows the target aspect; a value of zero means he's directly pointed at you, a value of 30 would mean you are bearing 30 degrees left or right off their nose
When the radar loses radar contact, it will show an extrapolated sign after 8 seconds of not receiving a return, and after a further 6, drop the track. Setting track hold forces the WCS to hold it for up to 2 minutes, but is not advisable
Did you say good day welcome to today? That is the cringiest shit ever 😂 Great video though I’ll give it a thumbs up for a good day and welcome to today
I don't think DCS can support 2 players simulating 2 pilots in 2 cockpit fighters? You have to coordinate with another friend, right? Because you are in the co-pilot position.
Dcs sure can simulate multicrew aircraft, in the tomcat you can either fly with or without another human. It is obviously much better with another human though
What rooster could have used is the NATOPS boldface specifically stating that before ejecting in a flat spin the canopy must be ejected or the risk of RIO canopy collision is high.
Thanks for welcoming me to, TODAY!
Come back tomorrow and ill welcome you again :)
Thank you very much for an up to date RIO tutorial!
No problem, glad i can help. Any other tutorials you would like to see?
@@commiccannon592 how to setup stick in rio
@@belugajr3906 you need hcu axis x and y, half and hull action as a minimum, in controls there is a menu called hcu that has all the controls on the real hcu
Holy shit dude this is like the exact tutorial I was looking for
I've been flying the Cat since it's release but have always wanted to at least have an Idea of what goes on in the RIO's office and therefore jump in the back and have a go, very helpful and well explained, thanks to you both.
Awesome video mate, best explanation I have seen. Great job.
1:57 Someone joined the VC, made me look to my other monitor 🤣🤣
great RIO overview and tutorial...!!
Thanks
Thank you very much . Big Like
Thanks for your kind words
- RWS and TWS have the same detection range
- recommend you revisit the aspect switch, I'm not sure where you got the numbers of each switch. They're by 600 knots
- target size switch does commands the missile according to the slant range of the missile to the target, not by time to impact
- main lobe clutter switch is not for a 0 closure target; thats zero Doppler filter. Mlc is for contacts that have the same vc to you as the ground is
You can't get a PD-STT unless the contact can be detected in RWS since it uses FM ranging
flyandwire.com/2022/04/12/the-basics-the-detailed-data-display-in-pulse-and-pulse-doppler-search/
I wrote this article on how to read the DDD
LT/RT shows the target aspect; a value of zero means he's directly pointed at you, a value of 30 would mean you are bearing 30 degrees left or right off their nose
When the radar loses radar contact, it will show an extrapolated sign after 8 seconds of not receiving a return, and after a further 6, drop the track. Setting track hold forces the WCS to hold it for up to 2 minutes, but is not advisable
To get an stt from tws hook the target and then press pd stt instead of pd search.
Pulse search should be called "Etch-a-Sketch" mode. You shake it a little bit and the screen clears up.
Damn that discord join really got me haha
Did you say good day welcome to today? That is the cringiest shit ever 😂 Great video though I’ll give it a thumbs up for a good day and welcome to today
i would like to see a rio start up tutorial and the pilot seat start up
For the Rio seat would you rather a carrier or land? Or do one and explain the difference for the other
@@commiccannon592 id rather see both carrier and airfield rio and pilot start up
@@commiccannon592 How do you change to the TID cursor?
@@andrewspiegel8745 buttons next the the hcu then to get the cursor up hcu half action
How do you half action in the Rio
I don't think DCS can support 2 players simulating 2 pilots in 2 cockpit fighters? You have to coordinate with another friend, right? Because you are in the co-pilot position.
Dcs sure can simulate multicrew aircraft, in the tomcat you can either fly with or without another human. It is obviously much better with another human though
🥰
Turned off when the first BUNCH came along.
Rooster could have used this
What rooster could have used is the NATOPS boldface specifically stating that before ejecting in a flat spin the canopy must be ejected or the risk of RIO canopy collision is high.