Great and straight to the point video! I have been using this app for several years now, its simply the best in my opinion. Fun-fact, the name scrcpy is actually just short for "screencopy" 😋 Cheers from Sweden!
@@FlutterTeacher Thank you too for posting this video. I have a Redmi Note 10 pro and before the update to Miui 14 and android 13 i simply couldnt get this to work at all (and seems it was a common issue for others too) But i decided to give it another try since i got the update to 13 and now works like a charm, i have really missed using it.
Thank you sir, it just worked great, in aditional some phones will need to have activated "USB debugging (Security settings)" in the debugging area to get the mouse and keyboard working.
for those who are wondering its not gonna bypass THE infamous "flag_secure" AKA not gonna let u record protected apps content or screenshot them ...coz i have tried it with bank apps and some streaming apps it shows black screen...like if u find this comment useful🤜
You are most welcome 🙏 You can simply use your mouse, it appears on Scrcpy screen on PC or laptop but not on real device. You can use the mouse to control the phone.
Thank you so much your video is the best amoung all the other vidoes i tryed yours finally worked and thank you. Once i try hotspot it does not work. It only works in my home wifi
You are most welcome. 🙏 Usually, I connect phone to laptop & record entire laptop & phone screen with OBS. I also use Scrcpy to record phone screen when connected to laptop.
thanks a lot I did installed it a side from this being a bit involved than I expected, I get slow motion video on my linux desktop! (ubuntu 22.04, latest version of scrcpy) is this always like this? what other options do we have when it comes to android/linux other than this? Thanks a lot in advance
I’m looking for a USB-C splitter for my Pixel 7 Pro that can connect to its USB-C port. The splitter should have two female USB-C ports: one for connecting USB-C Apple EarPods too make phonee calls, and the other for chargingg the phone and supporting data transfer. This data transfer should enable USB debugging mode, allowing me to use the mirroring application, scrcpy. I’ve noticed that most products on Amazon only support data transfer on the port that supports audio, but not on the charging port. Can you recommend a product that meets these requirements?
Closing the phone screen will turn scrcpy screen to black. Use below link to learn shortcuts in scrcpy, so that you enjoy scrcpy with off screen mode. github.com/Genymobile/scrcpy/blob/master/doc/shortcuts.md
No, for very first time we need all steps. Once you succeed, after that just follow these steps: 1) Connect phone to PC/laptop with USB cable 2) Note down the IP Address of phone 3) run "adb tcpip 5555" 4) Disconnect USB cable 2) run "adb connect :5555"
i have problem ..i have 1 android phone and tablet , and i use this tutorial for my phone, now i want to connect to my tablet, but everytime i connect my usb, it doesn't recognize my tablet..only connect to my phone ..how i can use my tablet
Hi bro thank you very much. Is tcpip can connect any android after one connected device with 5555 name or only one device can be connected ? Can you explain bro I can’t connect other phones only my phone always adb devices menu how to connect different devices? 😅
Hi. how to fix this error? it connect successfully on my IP but after running scrcpy, it says "could not find any ADB device", "Server connection failed"
i feel a bit delay for wifi mirroring its normal ? if i use cable more stable mirroring how to disconnect from wifi mirroring i want to use cable data again please answer
Scrcpy over WiFi is bit slow than USB cable. Use 'adb disconnect' to stop mirroring. This channel has video for Scrcpy with USB cable, please search for it.
Can I pair the phone and the scrcpy thorugh Wireless Debugging feature? what if my usb port is faulty and can't make step 5 to 7? I have a Samsung Galaxy S20+ Phone. Thanks!
Question for you. I did this and my screen mirror BUT when I tried playing a video off of my NBC (TV station here in the USA) I get a black screen for the video but the sound does come through. Any idea why this is happening?
Thanks man. But I'm having a kind of challenge at the last part. When I input the scrcpy command, it shows: "Device could not be connected (state=offline)" "Server connection failed" What should I do?
There might be flowing problems. 1) USB debugging may not be enabled. 2) Please check your phone when you connect. It will prompt the connection options, select MTP(Media Transfer Protocol). 3) USB cable may be faulty.
Thanks for this awesome software. Its been up and running fine but the issue i have now is running my app on it. when i choose the device from the bottom right and run, it says "Running gradle task 'assembleDebug'" and exits, nothing happens.
Hello! My PC is connected via LAN, my phone via WiFi. It only works as long as I keep the USB-Cable connected. When I enter the scrcpy command in the last step, it finds both, the TCP and the USB connection. I have to enter "scrcpy -e" to connect via WiFi, but it still immediately disconnects, when I unplug the USB-Cable. Of course, when trying to connect without the USB-Cable connected in the first place, the cmd response is: "error: device offline" Do you happen to know why? PS: Great video, straight to the point. Liked and subscribed 👍
There is noticeable lag between clicks and an action. The console says the speed is 201.9 MB/s, but it feels much slower than that. Can you give me some tips to reduce the lag? I am okay with a low resolution output.
I got this: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (10060)
when you see ind this video *unplus the usb cable dont do , just when you hit enter for the command ins cmd line after ** adb connect IP.:5555 ** now you can unplug the usb and start scrcpy
hey i have oppo mobile and as you said i have done my phone is mirror into screen but can not touch or control it by mouse or keyboard it give me error in cmd this :- [server] WARN: Ignore touch event, it was generated for a different device size
My phone screen is dead and touch is also not working but my phone is on and my usb debugging is also on and phone is alsk connected to the wifi same, So I can just connect the phone via usb and run adb command and it will connect wirelessly? I need wireless connection because i have redmi phone and i can't use mouse 😢 so i will connect scrcpy wirelessly and will connect mouse with with phone using otg.
@@FlutterTeacher this tutorial was really helpful and I was able to use my dead screen phone, but now my debugging is now turning on automatically, I think it is asking to allow debugging when I connect my phone but unfortunately I can't use touch screen so how I can allow debugging now??? Can you please help me again 🥺🤌? How I can enable debugging in dead screen phone?
Hey man, in my case its showing that adb command not found and similar command is gdb. By the way Im working in fedora and and Im using Hotspot as a medium
Hello! Please help if someone can of course! I wanted to connect through my computer to my Samsung Galaxy Note 10 phone and it doesn’t want to work and gives an error. Maybe someone knows how to solve this problem! Thanks for understanding!
You might be using old systems. Paste the path and add comma before the path if some existing path is there. This way is called "comma seperated paths." For more information search it on RUclips.
Yes it will work. I have explained in video about this. Same WiFi is not mandatory. When phone & laptop are no same WiFi we use local IP Address (ike 192.168.10.12) and when not we use actual or dynamic IP Address.
ok if you using a Redmi phone, don't do this I did this on my phone and my phone got destroyed, Then I checked with my friend's phone, which was also destroyed, and i had to factory reset my phone
I am sorry that happened to you, but I have tried this with Redmi 8A pro and it worked fine. Even I have tested in several other phone brands. It worked well.
upto step 9 everything works good but when we switch off our pc and mobile and next day when we write scrcpy command in command prompt we sse next screen see gog drive link ruclips.net/video/pchJpGqq2QA/видео.htmlsi=EeA4V5Ou2t5ealMK what setting in pc and mob i have to do so that scrpy will run wirelessly plerse reply in briefs as i am computer teacher plese reply my imp query ok thanx
![How to Mirror Android to PC or Laptop [USB & Wireless] (Tutorial)](http://i.ytimg.com/vi/CQFaQLTG3jk/mqdefault.jpg)
Download Scrcpy
- - - - - - - - - - - - - - - -
github.com/Genymobile/scrcpy
My Playlists
- - - - - - - - - - - -
Dart Tutorial Playlist : ruclips.net/p/PLe...
Flutter Tutorial Playlist: ruclips.net/user/playlist?list...
Social Links
- - - - - - - - - - - - -
Subscribe Flutter Teacher : bit.ly/3eCECkl
Facebook Page : bit.ly/3DjZ83B
GitHub : github.com/flutter-teacher
Man, what a legend. It worked, thank you!
Thank you so much. Very clear and straight forward. Bless you.
Glad it was helpful. You are most welcome 🙏
bless you sir. thanks a lot
Great and straight to the point video! I have been using this app for several years now, its simply the best in my opinion. Fun-fact, the name scrcpy is actually just short for "screencopy" 😋 Cheers from Sweden!
Glad you like Scrcpy.
Thanks a lot for watching video 🙏
@@FlutterTeacher Thank you too for posting this video. I have a Redmi Note 10 pro and before the update to Miui 14 and android 13 i simply couldnt get this to work at all (and seems it was a common issue for others too) But i decided to give it another try since i got the update to 13 and now works like a charm, i have really missed using it.
You are most welcome dear 🙏
Thanks , it works .... You got subscriber ....👍
Glad it was helpful.
Thanks 🙏
Thanks sir, I was searching for why adb tcpip 5555 is not working, then after watching ur video I got my answer!
Glad it was helpful.
Most welcome 🙏
Thank you! You are amazing!
You are most welcome. 🙏
THANK YOU VERY VERY MUCH.....🎉🎉 100% WORKS!! 😁😁😁👍👍👍
Glad it was useful!
You are most welcome. 🙏
A bit tricky but it works, thanks
Thanks 🙏
Works 100%
Thanks buddy 😊😊
Where is the common prom you mentioned in 5:50
Thanks bro working well until now.
Glad it was helpful.
You are most welcome dear 🙏
Great. All done. Thank you! Subscribed
You are most welcome 🙏
Thank you sir, it just worked great, in aditional some phones will need to have activated "USB debugging (Security settings)" in the debugging area to get the mouse and keyboard working.
Its Wroking! Thank You So Much...♥♥♥
Glad it worked for you.
You are most welcome 🙏
It also works for mac Intel, I just tested it :)
Thanks for doing this 🙏
exactly what i was looking for thanks
Thank you so much sir ❤❤❤❤
You are most welcome dear 🙏
Amazing bro you’re a legend
Glad you liked it.
Thanks 🙏
Thank you ❤
Thanks, it was very clear and helpful
Glad you think so.
You are most welcome 🙏
You are just the best ❤💯💯
thank you, working perfectly💯
working!. just disconnect from the vpn before connecting using adb
Glad it was helpful.
Thanks 🙏
Bro my laptop says adb is not recognised is it because i don have simncard in my ohone to turn on data
"adb is not recognised" happens due to invalid path.
I request you to watch the video properly & follow the steps accordingly.
Thanks! I had the same problem, but turns out I had just made a mistake!@@FlutterTeacher
thanks its worked for me. nice explanation also.
Thanks a ton sir
Most welcome. 🙏
thank you so much.
You are most welcome 🙏
will this work if my PC is connected to my ethernet and my device is connected with the wifi
nice introduction!
Thanks 🙏
Cool bruh it's working fine but after casting my screen to pc I can't able to hear any sounds from the mobile any solution for that?
thanks man
You are most welcome dear 🙏
Thanks so much
very helpful
Glad it helped you.
Thanks 🙏
thank you very much!
Most welcome dear!
for those who are wondering its not gonna bypass THE infamous "flag_secure" AKA not gonna let u record protected apps content or screenshot them ...coz i have tried it with bank apps and some streaming apps it shows black screen...like if u find this comment useful🤜
Thanks for providing such valuable information regarding scrcpy. 🙏
thank you
f king wizard! thanks!😄💪🧡
You are most welcome 🙏
Thanks 🙏
Thank youuuuuu🎉
Thank you very munch
You are most welcome 🙏
Helpful Video
Glad it was helpful.
Thanks 🙏
Thank you for the great work. Is it possible to run connect to the device wirelessly with mouse appearing on the screen?
You are most welcome 🙏
You can simply use your mouse, it appears on Scrcpy screen on PC or laptop but not on real device.
You can use the mouse to control the phone.
Thank you so much .work great ..is there anywhy get full screen without borders?
Yes, "Alt + F" is the shortcut key to toggle full screen for Scrcpy mirroring.
You are most welcome. 🙏
@@FlutterTeacher you are the best. subscribed.
Thanks. 🙏
Thank you so much your video is the best amoung all the other vidoes i tryed yours finally worked and thank you. Once i try hotspot it does not work. It only works in my home wifi
Ok. Then continue with home wifi.
Thank you. Which software did you use for screen recording the phone?
You are most welcome. 🙏
Usually, I connect phone to laptop & record entire laptop & phone screen with OBS.
I also use Scrcpy to record phone screen when connected to laptop.
After disconnecting, I have to do all the steps again ?
Can we also run phone audio with wifi?
Yes! scrcpy can play audio of your phone in Laptop or PC, but this feature works only when your android version is 11 or above.
@@FlutterTeacher without usb cable? It work directly wifi connection
Ya, it will work for both USB cable and WiFi.
thanks a lot I did installed it a side from this being a bit involved than I expected, I get slow motion video on my linux desktop! (ubuntu 22.04, latest version of scrcpy)
is this always like this?
what other options do we have when it comes to android/linux other than this?
Thanks a lot in advance
I’m looking for a USB-C splitter for my Pixel 7 Pro that can connect to its USB-C port. The splitter should have two female USB-C ports: one for connecting USB-C Apple EarPods too make phonee calls, and the other for chargingg the phone and supporting data transfer. This data transfer should enable USB debugging mode, allowing me to use the mirroring application, scrcpy. I’ve noticed that most products on Amazon only support data transfer on the port that supports audio, but not on the charging port. Can you recommend a product that meets these requirements?
When I close or power off my mobile phone the screen becomes black.
Any solution?
Closing the phone screen will turn scrcpy screen to black.
Use below link to learn shortcuts in scrcpy, so that you enjoy scrcpy with off screen mode.
github.com/Genymobile/scrcpy/blob/master/doc/shortcuts.md
@@FlutterTeacher I cant understand how to use the shortcut.
Can you please tell me the right way here to use scrcpy with off screen mode?
Can we do it over mobile networks?
Yes, you need extra phone for creating hotspot.
How to adjust with single phone is explained in the video.
Bro do i need to follow all these steps everytime I power on my laptop
No, for very first time we need all steps.
Once you succeed, after that just follow these steps:
1) Connect phone to PC/laptop with USB cable
2) Note down the IP Address of phone
3) run "adb tcpip 5555"
4) Disconnect USB cable
2) run "adb connect :5555"
i have problem ..i have 1 android phone and tablet , and i use this tutorial for my phone, now i want to connect to my tablet, but everytime i connect my usb, it doesn't recognize my tablet..only connect to my phone ..how i can use my tablet
Hey can you cast two or more androids to your PC over wifi at the same time?
Yes, it's possible. I will create video to explain this.
Thanx a lot... anydesk use kr krke dimag kharab ho rakha tha aur scrcpy ka wired use karna aata tha sirf...aaj se problem solved
]
Do the sound from android will active?
Yes! scrcpy can play audio of your phone in Laptop or PC, but this feature works only when your android version is 11 or above.
can support iphone
Please use Scrcpy for iPhone, it has different steps.
These are steps for Android phone.
Will it not work if my PC is connected directly via LAN and my phone is on WiFi?
If both devices are in the same local area network, it will work just fine no matter if the transmission medium is wired or wireless
When i tried it i get : ''target refused connection''. Any help?
Hi bro thank you very much. Is tcpip can connect any android after one connected device with 5555 name or only one device can be connected ? Can you explain bro I can’t connect other phones only my phone always adb devices menu how to connect different devices? 😅
You can use port number from 5555 to 5559
Mhiiiiiieeee!!! You're soooo awesoooome!!!
Thanks! 🙏
Hi. how to fix this error? it connect successfully on my IP but after running scrcpy, it says "could not find any ADB device", "Server connection failed"
are you using desktop right? I guess it's only works in laptop
I explain this with my laptop.
This can also works with desktop using Wifi dongle.
When I restart Android, I have to go through the entire process again, even though the IP doesn't change. Is there a way to avoid this? 🤔🤔
i feel a bit delay for wifi mirroring its normal ?
if i use cable more stable mirroring
how to disconnect from wifi mirroring i want to use cable data again please answer
Scrcpy over WiFi is bit slow than USB cable.
Use 'adb disconnect' to stop mirroring.
This channel has video for Scrcpy with USB cable, please search for it.
@@FlutterTeacher ty already disconnected
Okay
shows adb is not in internal or external storage
It's problem with paths.
Please watch the video properly and follow all steps exactly.
Can I pair the phone and the scrcpy thorugh Wireless Debugging feature? what if my usb port is faulty and can't make step 5 to 7? I have a Samsung Galaxy S20+ Phone. Thanks!
You must repair the USB port. It really needed even if you want Scrcpy over Wi-Fi.
Question for you. I did this and my screen mirror BUT when I tried playing a video off of my NBC (TV station here in the USA) I get a black screen for the video but the sound does come through. Any idea why this is happening?
It happens with any streaming apps.There is no remedy to correct it.
Thanks man. But I'm having a kind of challenge at the last part. When I input the scrcpy command, it shows:
"Device could not be connected (state=offline)"
"Server connection failed"
What should I do?
There might be flowing problems.
1) USB debugging may not be enabled.
2) Please check your phone when you connect. It will prompt the connection options, select MTP(Media Transfer Protocol).
3) USB cable may be faulty.
Hey it shows adb is not recognized as an internal or external command, operable program or batch file when i wrote adb tcpip 5555 what should i do?
It's problem with paths.
Please watch the video properly and follow the instructions as it is.
Thanks for the tutorial and it worked flawlessly. Also since I am using WiFi to cast will it affect my data plan of the network?
As long as you use static IP for connection, data won't be consumed.
Thanks for this awesome software.
Its been up and running fine but the issue i have now is running my app on it. when i choose the device from the bottom right and run, it says "Running gradle task 'assembleDebug'" and exits, nothing happens.
Can we connect android mobile to mac ?
Yes, you can!
'adb' is not recognized as an internal or external command,
operable program or batch file.
can you help me with this problem
It is the problem due to invalid path. Please watch video & follow the steps properly for setting paths
Hello! My PC is connected via LAN, my phone via WiFi.
It only works as long as I keep the USB-Cable connected.
When I enter the scrcpy command in the last step, it finds both, the TCP and the USB connection.
I have to enter "scrcpy -e" to connect via WiFi, but it still immediately disconnects, when I unplug the USB-Cable.
Of course, when trying to connect without the USB-Cable connected in the first place, the cmd response is: "error: device offline"
Do you happen to know why?
PS: Great video, straight to the point. Liked and subscribed 👍
i also have LAN idk if it works
It has to be same wifi network.
adb is not recognied as internal or external command
It happens due to invalid path settings.
Please set the path properly, close the command prompt.
Try with new command prompt.
useful
Glad to hear that.
Thanks 🙏
wish i could kiss u bro thank u so much i went through so many old shitty vids u saved me
i'll sub in apprecaition but plz the accent is to thick bro try emulate American kids or something plz
Many many thanks 🙏
Thanks for guiding.
Can you please tell me how can I improve and things that need to be fixed for accent or voice.
What to do if central wifi is not available only laptop and mobile is there
The answer is there in the video itself 3:20
Watch the video again & follow the steps.
@@FlutterTeacher yeah that's not working though
Please tell me the error or problem that you are facing.
There is noticeable lag between clicks and an action. The console says the speed is 201.9 MB/s, but it feels much slower than that. Can you give me some tips to reduce the lag? I am okay with a low resolution output.
Scrcpy works bit slow on WiFi, connect directly through USB cable,
watch this video ruclips.net/video/J0gMgkd5ows/видео.html
Worked once now cmd crashing on opening.
Can you please explain the problem exactly and properly.
@@FlutterTeacher actually I had to restart pc then it worked
Ok
I got this: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. (10060)
when you see ind this video *unplus the usb cable dont do , just when you hit enter for the command ins cmd line after ** adb connect IP.:5555 ** now you can unplug the usb and start scrcpy
hey i have oppo mobile and as you said i have done my phone is mirror into screen but can not touch or control it by mouse or keyboard it give me error in cmd this :- [server] WARN: Ignore touch event, it was generated for a different device size
My phone screen is dead and touch is also not working but my phone is on and my usb debugging is also on and phone is alsk connected to the wifi same,
So I can just connect the phone via usb and run adb command and it will connect wirelessly?
I need wireless connection because i have redmi phone and i can't use mouse 😢 so i will connect scrcpy wirelessly and will connect mouse with with phone using otg.
Yes, your phone can connect.
You can also enjoy mouse once connected via Scrcpy
@@FlutterTeacher this tutorial was really helpful and I was able to use my dead screen phone, but now my debugging is now turning on automatically, I think it is asking to allow debugging when I connect my phone but unfortunately I can't use touch screen so how I can allow debugging now???
Can you please help me again 🥺🤌? How I can enable debugging in dead screen phone?
Sir it gives me connection refused error
Kindly restart your PC/Laptop.
Follow the instructions exactly as shown in the video.
All the best.
Hey man, in my case its showing that adb command not found and similar command is gdb. By the way Im working in fedora and and Im using Hotspot as a medium
Please set the path for scrcpy folder properly. If done already close old command prompt & try with new one.
@@FlutterTeacher it is working fine with usb but when tried without wire it shows server connection failed
I kindly request you to watch video properly & follow all steps accordingly.
Use this link to get Scrcpy for Fedora snapcraft.io/install/scrcpy/fedora
On REDMI 9T , I can't use the mouse or the keybord on the phone !!! ... just like Screencast!!
There might be problem at your side.
Scrcpy is not just a screen mirroring but gives access to control phone with keyboard and mouse.
The only problem is, everytime i go off my house and connect to my work wifi, and get back home, i have to do the process again
The device felt cheated.Just like us.
Hello! Please help if someone can of course! I wanted to connect through my computer to my Samsung Galaxy Note 10 phone and it doesn’t want to work and gives an error. Maybe someone knows how to solve this problem! Thanks for understanding!
error when?
Bro in the path new option not showing , please help bro😩😫😫😫😢😢😭
Please reply ,bro
You might be using old systems. Paste the path and add comma before the path if some existing path is there.
This way is called "comma seperated paths." For more information search it on RUclips.
Will this work if I turn on the hotspot on the phone and connect it directly to the PC?
Is it mandatory that it should be connected on the same wifi?
Yes it will work. I have explained in video about this.
Same WiFi is not mandatory.
When phone & laptop are no same WiFi we use local IP Address (ike 192.168.10.12) and when not we use actual or dynamic IP Address.
Gracias Alluh Arjun!!!
Hie,
I can't control my phone on my pc but I am able to mirror it.
Help
Turn on usb debugging security settings
ok if you using a Redmi phone, don't do this I did this on my phone and my phone got destroyed, Then I checked with my friend's phone, which was also destroyed, and i had to factory reset my phone
I am sorry that happened to you, but I have tried this with Redmi 8A pro and it worked fine. Even I have tested in several other phone brands. It worked well.
It works but After this My laptop won't connect to my phone for internet 😔
This should not happen, even if you use mobile hotspot to connect with laptop & use scrcpy, internet still works on both laptop and phone.
My app doesnt even open lol
Does you phone mirrored though scrcpy?
Can you please tell me the error?
@@FlutterTeacher i cant even run the scrcpy app on pc. as soon as i open it, it shows code page and disappears.
@@Rushil_333 Before trying scrcpy over WiFi, please try normal scrpy for this watch this video ruclips.net/video/J0gMgkd5ows/видео.html
bruh its via not wirless
Watch the video carefully, it's wireless.
We have to connect wire only for adb TCP/IP communication then we have to remove wire and enjoy wireless
Scrappy XD
I am really sorry, I can't understand you do you need exactly?
upto step 9 everything works good but when we switch off our pc and mobile and next day when we write scrcpy command in command prompt we sse next screen see gog drive link ruclips.net/video/pchJpGqq2QA/видео.htmlsi=EeA4V5Ou2t5ealMK what setting in pc and mob i have to do so that scrpy will run wirelessly plerse reply in briefs as i am computer teacher plese reply my imp query ok thanx
Thank you very much!
You are most welcome 🙏