how to make mini lathe machine super simple
HTML-код
- Опубликовано: 20 авг 2024
- instructions for making mini lathes Lathe manufacturing instructions, Anweisungen zur Herstellung von Drehmaschinen, Lathe farante instrukciojn, Токарный станок инструкции, คำแนะนำในการทำเครื่องกลึง, Instruksi pembuatan bubut, Praecepit fieri ferroque, Cyfarwyddiadau gwneud turn, hướng dẫn chế máy tiện mini, how to make mini lathe machine
facebook bit.ly/2MEZpCv
facebook groups bit.ly/2YeUz4u
youtube bit.ly/3fh4Mo3
Re:Welding at ~12:00
The ground should be on the slide plate to avoid bearing current which could damage the linear bearings
I noticed that as well, but it was relatively low on the concerns expressed while watching this 😅
thank you for watching
Remember to subscribe to the channel
All products on purchase from taobao.com
Well, that's definitely a super simple way to make a lathe. I think this might be a good wood lathe
Very Nice. Thanks for sharing.
Ijin nyimak bosq❤❤❤👍👍👍🙏👌☕☕
This is a joke right ? Don't get me wrong it's super cool but a metal lathe is a very precise and accurate machine. Calling this a proper metal lathe would be like me calling my microwave a spaceship. Like I said super cool though you should try and put a little more Care into your projects in the sense of if you're going to make it why don't you make it as good as you can maybe by making sure you're making accurate cuts cleaning them cuts up stuff like that super cool video man
👍👍👍 mantap
super simple.... este tio es capaz de hacer una nave espacial con un bote de tomate...
Yeah you should have built a stable/sturdy table to work from first. Punching the holes on top of your linear rails was pretty sketchy.
Thank you..... When he was punching them holes I could barely stand to watch
@@RelaxDooleysHere then I bet you liked the tailstock locking mechanism at 14:29 :)
This whole thing was sketchy. I hate to imagine if people actually believed a metal lathe could be made like this with such poor materials, welded together so poorly and misaligned so badly. Someone gonna get hurt like this
Super job!!
Nice I already have a bucket just need the rest
Merci beaucoup pour la vidéo
A great job, good for you
One thing u did wrong.. U used nut bolt to stop sliding.. But u directly tightens bolt on linear shaft whit will scratch it in long use n then sliding motion will be hindered.. But rest of ur work is superb..
That was bad, but there's more bad than just that
amazing 👏
Суппер.....
Cool
good job bro
Very good job
nice job .
What is the length and diameter of those supported shafts??
Muito bom 👍 forte abraço de nós do canal ferreira motos 👍
Very good my friend..good work
TOP TOP EXELENTE
Therevwould be so many awesome videos on RUclips if you would just explain the thought process behind what you're doing. I'm sitting and watching, but learning nothing. Whereas on a video with explanation, I sit and watch, and learn why he's putting this bolt here or that gear there.. These don't really constitute "how to" videos in my opinion.. More like a "watch what I can do" video.
There's much better videos to learn from. You don't want to copy this machine. This is dangerous
dudukannya rel yg dari aluminium itu harganya brp ya?,,...
Muito bomme simples
Ini yg saya cari.. tp sayngnya keterbatasan bahan pembuatan di daerahku
dobra robota 👍👍👍
Valeu amigo
Ja es un croto..... pero la idea está buena
Great
40 years of engineering says don't do this , there are better methods to do this Linear rails and bearings are fine but do not weld near them.
I agree. This might make a decent wood lathe if the welds were better, but this seems dangerous to me
Точить хлебный мякиш можно, для металла жëсткости не хватает.
Теоретик с чипмэйкера ? Сделай такой и удивишься, как минимум мягкие металлы легко идут.
Good job! Is there any vibration using those linear-motion bearing?
I doubt there is from the linear bearings, but I'm sure there's an extreme amount of vibration from using such thin gauge angle iron and not being an experienced welder to perform the quality of welds needed for a metal lathe
👍👍
REALLY VERY GOOD JOB !!!
please, can you share where you find/buy all the component of the lathe?
you made the structure, but i think that the other part are purchased from some specific shop.
all the best :)
Curious if i don't have access to a welder is riveting or other fastening method visble? I've seen some people fill alluminum extrusions with concrete too. Your thoughts?
Please tell me the details of the reduction gear box
fail
Đỉnh
What size of air compressor did you use in your ooasma cutter? Tnx
How many watts does the boss use...
Sangat kreatif
LO HICE IGUAL Y ME SALIO DESCONADO....
CUACK
kesian bertuhankan yg tak bermoral
Cái đỡ cốt máy bác lấy từ máy gì vậy. Thanks
Motor giảm tốc cốt âm
после центровки сверхточным электродным методом, биения видны даже не вооружённым глазом. Мне кажется делать такие станки просто перевод материала
Yes, I can't tell if he just doesn't know better, or just wanted to get views for his video but this is not a good lathe for metal
น่าสน
time in the video 19:50......
you can even notice in the shadow of the head of the lathe that it is not centered....
made in a hurry to come another video to youtube....
and... why a transfer box if it has a speed controller? which one is mounted where it is not necessary?
un desastre !!!
8:16 tobu Nightcore!
Bom dia amigo que média é esse rolamento linear do carrinho transversal
chuck nya itu ukuran brp inchi ya bang?,,...
Which motor is use?
Can you send me all the materials pls and the diagram and where I buy the other materials
ming yam taaung! foo nannay xing wing ahhhhh.
mantaf. Habis berapa duit bos?
salah judul seharusnya merakit bukan membuat
ужас! даже если предположить что все выставлено параллельно соосно и перпендикулярно, сварные конструкции через пол года-год выведут из параллельности соосности и перпендикулярности ибо их нужно отжигать
если коротко то нарушены все технологии изготовления точных станков
@Александр Бобров
да конечно мелочи и не важно что у вас при точении вала будет любая другая форма кроме цилиндрической главное же ж редуктор
ты знаешь, моя собака лижет яйца, когда нечего делать
Здравствуйте, извиняюсь за свою неосведомлённость но, что значит отжигать детали? Спасибо.
@@user-jo4rg3tr7j
в гугле набери "отжиг стали это"
в википедии "отжиг"
ну мальчик старался))) во вот всякими ненужными индикаторами до микрометров вымеряете, а оказывается согнутый электрод круче любого ренишав)))))
ta eu com um maquinario deste faco ate uma aero-nave
เพลงอกหัก
Deskripsi kosong, coba dicantumkan bang
Harga brp?
2:00 But the wind was blowing there :)
where to buy tailstock sir?
Bonito quanto custa
Токарный станок, собранный в гараже на коленке со временем превратится в пылесборник)
ทำขายไหมครับ ขอสั่งทำได้ไหมครับ
За эти деньги можно было нормальный точный станок купить !
Só se for em teu país...rsrsrs
🙏🏻👍🙏🏻
👍👍👍👍👍
Why are you working on the floor? If I were you, I will build a table first. These homemade lathe that uses those linear rails and bearings simplify the build but they will not be as rigid and precise compare to those build to the same design as the real lathes.
If it's just for a hobby it shouldn't matter that much
That and the frame that supports them is flimsy. Thin flimsy metal welded together poorly running at high speeds and lot's of power is dangerous
Harga nya berapa.bos..
I think that it's so much stupid cutting steel without safety glasses and gloves...eather using angular mill...
Safety glasses I agree with you. Wearing gloves while using a lathe is an awful idea though, you need some dexterity during operation and it gives the machine something to grab while operating. Put the gloves (cut resistant) on while cleaning chips out of the machine. The biggest safety concern in the video is the position he’s operating from. Crouched on the floor, hovering over the machine, he isn’t in a position to retreat if something crashes.
Where did you buy the tailstock?
На заказ делаешь?
ราคาเทาไรครับ
Quer um deste Sri como comprar?
You made so many mistakes that the video shoul be named "How NOT to...". You either have little technical understanding or have done too little research
Жёсткости станины на пластиковые детальки
make or assemble😂😂😂
Из-за музыки не хотел досматривать видеоролик ....дизлайк
ок...
А как патрон вручную повернуть? Червяк на шпинделе, я видать что то пропустил и отстал в развитии
Spare part beli d man ya?
Beli di banggod
Beli di banggod
I stopped watching because of bad and unnecessary music
sir how much if i will order from you this kind of lathe machine sir? i would like to buy one from you
Modal berapa?
Harga
стоооо пудов не для себя делает.
Very bad music
🤗🤗🤗🤗🤗🤗🤗💯💯💯💯💯💯👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🇰🇷
Ужас не то слово
Дичь редчайшая...
блять🤣😂
Гомно ваши станки ......
Diese linearführungen sind das falscheste was man nehmen kann! Und für so eine drehmaschine ungeeignet.diese Maschine hat keine genauigkei!
Totaler Kernschrott wat der da bastelt
I agree a proper lathe shouldn't use these rails, but on this lathe the rails might be the best part of it ..haha
Modal brpa biaya untuk bahannya pak
Sekitar 7 juta