Hello dear , i am now stuck with no sound ( both input and output blank) Tried my best to fix it of my own but could not Any fix from your side Wifi is also not working Thanks in advance
os installed successfully, but in the end i can only see single efi partition...i am not getting 2 partitions like urs.. i dont understand where to paste those files....
hello sir, in my bios settings, hyperthreading doesn't appear and isn't there, but after I checked in the command prompt hyperthreading is active, I don't know how to disable hyper threading, if I still install Mac OS Sonoma with hyper threading on, will it cause side effects? because in the EFI notebook web description efi folders gen 12,13,14 need disable the hyperthreading My laptop specifications: Intel Core i5 -13420 H Raptor Lake Nvidia Geforce RTX 2050 Intel UHD Graphics acer nitro v15 please answer the question sir
My friend NVDIA does not support macos You need to take pain to enable the graphics acceleration After Macos12 it only support AMD gpus And intel 10th gen Gpu only supported fro iGPU
@@TechSudamaEnglish is dgpu and igpu the same? or different ? i know just igpu and i wanna ask how to disable hyper threading in my bios i cannot found the setting of hyper threading
@@TechSudamaEnglish, could you please explain this? Do you have more information on where I can see who I can use the proper SMBIOS? I am trying to install Senoma on my Windows 10 Pro Dell Inspiron 15-7579 Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz 2.90 GHz/20GB Ram, Intell HD Graphics 620.
These steps are a waste of time - I'm using Kaby Lake Core i5 7th gen. After select Install MacOS it goes nowhere, screen would shut off and will bring me back to the very first page.
Yes For iGPU acceleration follow this page techsudama.in/pc/how-to-enable-intel-skylake-graphics-intel-hd-graphics-515-520-530-540-550-and-580-on-macos-sonoma/
@@TechSudamaEnglish thanks but when i install last time with other method without macos software file it's needed network and my wifi is not working and it needs only Ethernet that i haven't
@@TechSudamaEnglish I choose the same as you but I get stuck on an error running the Sonoma installer. I can get OpenCore to start and I can select installer but it just gives me some errors. Some way I can contact you easier to send a picture? // niishyb
@@TechSudamaEnglish is possible u do a video? i already made done the letter efi like u and put the folder there with Explorer++ also, same mount partition. do i need to make one totally random like from windows is ok 100mb and put efi there?
I did everything correctly but it is not booting without pen drive and also not showing any boot entey in bios but there is option called boot from efi file but I don't know how to use it where to find file My lap specs i310gen 16gigs ram igpu And my ethernet and wifi is also not working
@@TechSudamaEnglish it was not showing in my uefi boot list too so i did more research and found a solution i have to make a seperate partition for mac os efi files and i pasted the efi files from pen drive to the efi partition i made then it worked it was shown in my uefi boot menu but i am facing wifi issues please any other solution fo that?
@@TechSudamaEnglish Thank you for this, i did this and got the apfs option but still it is showing that "macOS Sanoma is not compatible with this mac" please tell me what do i do now?
Hello dear , i am now stuck with no sound ( both input and output blank)
Tried my best to fix it of my own but could not
Any fix from your side
Wifi is also not working
Thanks in advance
Please refer dortania site
Thank you for your tutorial, if kindly lower the music or turn it off, thx
Thank you
4:45 I dont find any of these drivers. I creadet a separate partition like you, but it did not apear.
Please double check the video method
os installed successfully, but in the end i can only see single efi partition...i am not getting 2 partitions like urs.. i dont understand where to paste those files....
It must be rhere
If can't find the can crrate one in SSD
hello sir, in my bios settings, hyperthreading doesn't appear and isn't there, but after I checked in the command prompt hyperthreading is active, I don't know how to disable hyper threading, if I still install Mac OS Sonoma with hyper threading on, will it cause side effects?
because in the EFI notebook web description efi folders gen 12,13,14 need disable the hyperthreading
My laptop specifications: Intel Core i5 -13420 H Raptor Lake Nvidia Geforce RTX 2050 Intel UHD Graphics acer nitro v15
please answer the question sir
My friend
NVDIA does not support macos
You need to take pain to enable the graphics acceleration
After Macos12 it only support AMD gpus
And intel 10th gen Gpu only supported fro iGPU
@@TechSudamaEnglish thx sir for the answer,the conclusion my laptop can't install macos ?
Can but need to enable the dgpu that is a trick
For more please visot dortanie
@@TechSudamaEnglish is dgpu and igpu the same? or different ? i know just igpu
and i wanna ask how to disable hyper threading in my bios i cannot found the setting of hyper threading
Integreted gpu
Dedicated gpu
Work with gtx 1660 super?
I am at the part where I click Continue to install Sonoma but I get a message: "macOS Sonoma is not compatible with this Mac"
Please use a proper SMBIOS
@@TechSudamaEnglish, could you please explain this? Do you have more information on where I can see who I can use the proper SMBIOS? I am trying to install Senoma on my Windows 10 Pro Dell Inspiron 15-7579 Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz 2.90 GHz/20GB Ram, Intell HD Graphics 620.
techsudama.in/pc/how-to-enable-intel-skylake-graphics-intel-hd-graphics-515-520-530-540-550-and-580-on-macos-sonoma/
@@TechSudamaEnglish how do I do these recommended setups in Sonoma If I have not even had a chance to install it yet?
ok I installed it and then i didn’t need it anymore so I deleted the partition now I can’t boot in windows without the usb stick
You've made any mistake pleas check the EFI
@@TechSudamaEnglish I DON’T want to keep mac os I deleted the partition it was on now I can’t boot without that usb stick that is like a bootcamp
These steps are a waste of time - I'm using Kaby Lake Core i5 7th gen. After select Install MacOS it goes nowhere, screen would shut off and will bring me back to the very first page.
I'm using a desktop and downloaded the Modded EFI Open Core for KabyLake.
Need to crrate an EFI first
Its work on intel i3 5th gen 8gb ram laptop????
Yes
For iGPU acceleration follow this page
techsudama.in/pc/how-to-enable-intel-skylake-graphics-intel-hd-graphics-515-520-530-540-550-and-580-on-macos-sonoma/
does this methode needs internet while booting first time and while installing ?
No
@@TechSudamaEnglish thanks but when i install last time with other method without macos software file it's needed network and my wifi is not working and it needs only Ethernet that i haven't
You can enable the ethernet by kext
And then use Smartphone USB thertning
@@TechSudamaEnglish how ??
During OCAT - Does it matter what SystemProductName I choose? I had it pre-select MacPro7,1 for me.
Please choose one SMBIOS that is capable to run Sequoia
@@TechSudamaEnglish I choose the same as you but I get stuck on an error running the Sonoma installer. I can get OpenCore to start and I can select installer but it just gives me some errors. Some way I can contact you easier to send a picture? // niishyb
System specs
And EFI
does this methode needs internet while booting first time and while installing
Not pessary
Not nesserry
everything was working until i took pendrive off. the command "bcdedit /set {bootmgr} path \efi\boot\bootx64.efi" is not working for me any easy fix?
the command is sucessful in cmd but doesnt work. it boots always to w10 instead to bootloader
Goto BIOS
set boot priority to EFI Opencore
@@TechSudamaEnglish sry idk how to do that. only shows windows boot manager
Need to crrate a seperate drive in Installation disk in the format fat32 name EFI and put the EFI to there
Goto BIOS set the boot priority to EFI
@@TechSudamaEnglish is possible u do a video? i already made done the letter efi like u and put the folder there with Explorer++ also, same mount partition. do i need to make one totally random like from windows is ok 100mb and put efi there?
after doing the bcdedit command when I restart my computer restarts into windows without displaying the MacOS disk selection screen
i tried manually booting into the bootx64.efi file from bios but it still loaded into windows
Please disable thw secure boot in security Pllist
Youve mossed some part of thw video
Watch again without skipping
I did everything correctly but it is not booting without pen drive and also not showing any boot entey in bios but there is option called boot from efi file but I don't know how to use it where to find file
My lap specs i310gen 16gigs ram igpu
And my ethernet and wifi is also not working
Enter into BIOS set Boot priority to UEFI
@@TechSudamaEnglish it was not showing in my uefi boot list too so i did more research and found a solution i have to make a seperate partition for mac os efi files and i pasted the efi files from pen drive to the efi partition i made then it worked it was shown in my uefi boot menu but i am facing wifi issues please any other solution fo that?
For WiFi issue please follow Macos play list
@@TechSudamaEnglish and how can i use dual monitor with my laptop any driver or something bcoz the external display is just black
You will have to go to dortania for dual monitor setup just need some entries
Does it work on ryzen 5 3500U ?
Yes but iGPU need to spoof
@@TechSudamaEnglish How ?
@@TechSudamaEnglish I followed your vid and now it get stuck at "In memory panic stackshot succeed"
@@cthanus I think you have to change your edit folder
Dual boot is not working it's only boot when usb is connected i run the code and then try again but no difference
You skipped the last method EFI not coppied
when i try to erase the MacOS there is not any option of apfs
Please reboot to windows and format drive as ntfs
And try again
Disk should be in GPT
@@TechSudamaEnglish Thank you for this, i did this and got the apfs option but still it is showing that "macOS Sanoma is not compatible with this mac" please tell me what do i do now?
Please check the latest method on my channel macos play list
Use supported Plist as your system specs
@@TechSudamaEnglish isn't it just for mac? i mean can i do that on windows?
Yes
it’s the same process installation with opencore ?
Because I see MacOS installer 2/3 times and after the usb doesn’t show up the « MacOS » section.
Please double check ✔️ ✅️ all the steps and try again
One single missing step will bring error
"macOS Sonoma is not compatible with this mac" error shown
System specs please
8gm Ram i3 5 th gen , Intel graphics 5005U graphics , laptop
Yes
You've to make the EFI
and to spoof the Graphics please follow the latest macos video from my channel
my usb flash not detected on explorer😂😂
Please check all the steps
@@TechSudamaEnglish ok) but i has got mini-problem( usb ports disable where mac os installer run help plss:(
Why is it so laggy?
GPU acceleration needed
@@TechSudamaEnglish How do I do it? I got and RTX 3060 and i5 12400f.
You need to visit dortania for kore details
@@TechSudamaEnglish I did but alderlake was not there.