Test Fitting My Custom BA Falcon Haltech IC-7 Mount & Michigan Motorsports T56 Reverse Lockout
HTML-код
- Опубликовано: 10 сен 2024
- We're back with my BA Falcon XR6 Turbo, checking out my V2 custom mount for a Haltech IC-7 dash. Opinions will no doubt be divided, but I absolutely love it. We're also fitting a Michigan Motorsports Reverse Lockout Solenoid Delete kit to the T56 6-Speed gearbox to solve my weird lockout issue. #motoringbox
MotoringBox is proudly supported by Century Batteries - Australian Made Since 1928
www.centurybat...
🧰 Parts Used
Michigan Motorsports T56 TR6060 Reverse Lockout Solenoid Delete:
ebay.us/rQgsf6
As an eBay Partner, I may be compensated if you make a purchase.
👕 Merchandise and Early Access
Buy a shirt: www.motoringbo...
Sign up on Patreon for early access: / motoringboxtv
🚘 About MotoringBox
MotoringBox is an Australian based RUclips channel run independently by Sean McKellar since 2019. It focuses on quality content about Australian car culture and some of the incredibly unique vehicles we manufactured here. I work a day job and publish videos in my spare time, so thank you for your patience and I hope you enjoy my videos.
📭 Send Me Stuff!
MotoringBox
PO Box 121
Goodna QLD 4300
🔒 External Links
Website: www.motoringbox...
TikTok: / motoringbox
Instagram: / motoringbox
Facebook: / topgearbox
Please note: I enjoy working on cars but I can't promise that what I do will work for your particular car, or that you won't harm yourself, someone else, your car, or your warranty doing it. Please be safe, be responsible and if you're not sure what you're doing, get a qualified mechanic to help you out.
I'd personally take it one step further and pull the components out of the IC7 housing and design a pod with integrated housing and 3D print it, I'd probably also find and integrate some OEM style buttons and rewire them to the IC-7 board so it all looks factory.
this version 1.1 looks way better than version 1 I'm glad you did recess it down into the dash and removing all the surrounding panel sure made a difference as well, I'm a gadget nut and I like it 😎
Love this! I hope one day you 3d print these i would run this setup in my bf in a heartbeat
I remember doing something very similar in the early 2000s with my n14 SSS with an Apexi SAFC controller.
There is something quite rewarding about making your own custom part for your pride and joy. Especially when it's a one off that sets your car apart from others. Well done mate! 👍
Good job Sean, but it looks a little too tall for me. I might change my mind if I saw it first hand.
I was in SCA the other day looking for a battery for my kids Autocross car. I was just going to get a “home brand” version, but then I thought of you and your sponsor, and grabbed a Century. Does this make you and influencer now?😀
big nostalgia hit with the gran turismo music haha
really cool setup so far, it would be nice if haltech made a small sleek ultrawide screen with thin bezels
Winner Winner Chicken Dinner. 👍🏼 That installation looks Awesome. 👀
Love the mod of the ic7. Only thing is if you can get a slightly darker shade of silver or a metallic grey paint for the dash pieces. I think the silver is a bit bright. Just my 2 cents. Cheers !
The mount looks smart and it’s usable clearly within your line of sight without distracting.
As someone with an FG, it looks perfectly normal. Great job, colour me jealous!
Really impressive there Sean, if you like it (& I gleaned you did 😊), then good on ya!! Car ownership is all about making it how you think it could be. Subtle or non subtle mods are yours to make, I prefer that then being in front of the cluster.
Looks like a solid winner.
Great job..looks heaps better. Nice work mate.
still reckon it would be a mad thing to 3d print once you got the plug clearances sorted out
Pretty good job there Sean. It's always fiddly but you have it right this time. The height is perfect. I modded a Holden VY/VZ clusterpod onto the top of the dash for a VU ute and with a good deal of thinking, I got it sitting firmly on the dash. Even though it wasn't made for it.
Very nice installation.
I love it. Thank God for a BARRA video thanks Sean 👌
It looks great.
Well sir, that’s very impressive.
Once you iron out all the kinks I think you have nailed that project.
Doesn’t look to out of place and once painted I have a feeling it will look very stock.
PS: I must admit, as much as I enjoy Falcon content I’m so keen for more Magna videos.
✌🏼✌🏼
Something big on the way for that!
That's a sick setup
Great work mate.
Very nice! It gives the car a race inspired theme! 👍
I really like this Sean, I’m getting some R34 GTR’esque vibes from it too.
Would be cool if you could make a custom display that emulates that of the the R34’s!
It's definitely something different and not sure if I like it or not (but it will probably grow on me)... Would this thing fit between the infotainment and centre console area? (Below the AC controls)
I don't think it would - too wide. Also a very low spot to be looking.
@@MotoringBoxTV True, if you're looking at the gauges constantly, than that wouldn't be a good spot to put them...
Looks great Sean 👍. Agree that the lower profile sits and looks so much better.
Nice work on it mate
Used that lockout delete over here for my Barra swap mainly because I couldnt fit that big solenoid in the tunnel
Do not paint it silver...the light will reflect off your windshield. And become distracting hence why dashes are black to begin with. Drive with a plain A4 sheet of paper on your dash to understand what I mean .
Must admit, I was thinking if you paint the back of it silver, it might reflect light, perhaps the back should be as close to a match with the dash as possible?
Some BA's had these painted silver from factory. I think it'll be fine!
I think it would only be an issue if he made it chrome...
@@MotoringBoxTV go for it... but...if I'm right...I want a call out
Agreed, at very least, silver should only be on the viewable face. the section on the windscreen side should be matte black
Reminds me of the R34 MFD, lowkey wanna do this to my falcon aha
I re@con you did a great job,I bought a digital dash and did not want to block out my cluster either but I have a bf Typhoon,so I had to use a windscreen mount and sit my dash on the boost and oil pressure guages,my digital dash doesn’t have oil pressure with the standard computer for this dash,so not as good as yours
Great video as always Sean, the 2nd iteration of the IC7 mount is much better. 100% the right call to recess it further into the dash. It's not perfect (when is it ever eh?) but I think it looks great! Keep up the good work mate!
I reckon if you cut the top bit off the ICC (where the Phillips head screw is) you could get it to sit even lower and then it would look better. You don't need that top bit to hold the ICC, the 4 bolts down low are more than enough to hold it in.
That is a nice friction fit
Really cool. Personally, i would get a flipup android headunit that would go below the icc. I think that would look really clean.
Looking good Sean, I knew you could do it better. 👍
Nice solution. What filament are you using for the 3D printing?
How does it look from the front of the car/through the windscreen?
No printing - it's just sheets of ABS plastic and a soldering iron used as a ghetto plastic welder 😁
@@MotoringBoxTV impressive! Very Toy-Polloi-ish (you’d have to know who that is 😂)
Makes me wonder what could be done with 3D printing.
The reason for my Q was that normal PLA won’t deal with the Aussie heat and you you’d want to use ABS or PETG filament.
You should do a video of when your removing and painting the icc etc, I’m planning on doing the same to mine
Looks awesome 👌
If it's practical and does what you want, where you want, then who cares what others think.
I'm keen for version 69
I think it looks great, and really if you want to keep the factory gauges - which of course you do because they are really nice, where else would you put it?
I have no idea if that screen display unit would support this but it would really give it that XR6 vibe if you could get it to display the XR6 logo on start up just like what you did with that unit you put in the Ralliart Magna.
No startup screen unfortunately, but you can customise the images used on the screen - which I will be doing at some point!
Sean, I noticed the battery with the car off was only 12.3V.
You know anyone to get a good deal on a new Century battery 🤣😋
At the dash it's lower compared to measured at the battery, for some strange reason.
@@MotoringBoxTV All good. Just poking fun 👍
Ps, Just bought a shirt and sticker 👌
LOL love the Chinese work boots
Winner winner chicken dinner
Dunno why but the Magna and Falcon have so much character compared to the 'modern cars'.
I like it!!!!
First time you park in Logan it’ll be gone….
I’d prefer stock gauges up there, they look clean…. This looks cheap, even though it’s not
Certainly don’t hate the channel…. Good luck
😁🤘🐠
Can you run Google maps thru it ?
No its just a dash sorry.
@@MotoringBoxTV Reply patent pending Haltech lol 😝
It seems my comment disappeared? But yeah exhaust video on my channel for anyone who wants to take a look and u shaun if u want to sounds fantastic 1996 vs commodore equipe series 2 with a 2.5 redback great vid that ba i love it
Sorry dude… getting too dodgy. (don’t call me a troll, you asked to judge). When ever you do a job ask yourself would a reasonable person accept this job from factory.
Crazy to think the vehicle is near on 20 years old. I'm keeping mine as original and in the shed for another 20, who knows they may be worth a few bucks (hopefully)
Why not get the dash kit that its actually intended for? Looks silly sitting there needs to be where the cluster is
He answered that in the video. He doesn't want to cover his factory cluster..
Yeah seems pointless having info out of your direct field of view.
@@AGRSSV1 do you constantly need to see how much Boost you make or oil pressure when you drive around on the streets? It's a flog to have it replace the stock cluster that is easy to see. Like when using Autometers was the thing to do.
@@Low760 to be honest I wouldn’t even bother with it full stop on a basically stock car
@Mal Smith it literally does everything the cluster does. Theg also sell a kit to convert the cluster to digital. Theres no point to it if your going to keep the original setup
Hey Sean. Great job on the videos.
Love the mount position. I’ve got an ic7 I’d like to mount in the same position. Do you or anyone else make a mount like this yet? Be great if someone 3d printed these.
Can’t bring myself to cover the standard cluster and this seems to be the best option. Not sure I have the time and patience to make one from scratch. 😄cheers.
Impressive work!😊